MX29GL256EHT2I-90Q

MX29GL256EHT2I-90Q Datasheet

MX29GL256E

Part	Datasheet
MX29GL256EHT2I-90Q	MX29GL256EHT2I-90Q (pdf)

Related Parts	Information
MX29GL256ELXFL-90Q	MX29GL256ELXFL-90Q
MX29GL256ELT2I-90Q	MX29GL256ELT2I-90Q
MX29GL256ELXFI-90Q	MX29GL256ELXFI-90Q
MX29GL256EHXFI-90Q	MX29GL256EHXFI-90Q

PDF Datasheet Preview
MX29GL256E MX29GL256E DATASHEET The MX29GL256E product family is not recommended for new designs, while MX29GL256F family is suggested to replace it. Please refer to MX29GL256F datasheet for specifications and ordering information, or contact your local sales representative for additional support. P/N:PM1499 MX29GL256E SINGLE VOLTAGE 3V ONLY FLASH MEMORY The MX29GL256E product family is not recommended for new designs, while MX29GL256F family is suggested to replace it. Please refer to MX29GL256F datasheet for specifications and ordering information, or contact your local sales representative for additional support. GENERAL FEATURES • Power Supply Operation - to volt for read, erase, and program operations - MX29GL256E H/L VI/O=VCC=2.7V~3.6V, VI/O voltage must tight with VCC - MX29GL256E U/D VI/O=1.65V~3.6V for Input/Output • Byte/Word mode switchable - 33,554,432 x 8 / 16,777,216 x 16 • 64KW/128KB uniform sector architecture - 256 equal sectors • 16-byte/8-word page read buffer • 64-byte/32-word write buffer • Extra 128-word sector for security - Features factory locked and identifiable, and customer lockable • Advanced sector protection function Solid and Password Protect • Latch-up protected to 100mA from -1V to 1.5xVcc • Low Vcc write inhibit Vcc VLKO • Compatible with JEDEC standard - Pinout and software compatible to single power supply Flash • Deep power down mode PERFORMANCE • High Performance - Fast access time - MX29GL256E H/L 100ns VCC=2.7~3.6V , 90ns VCC=3.0~3.6V - MX29GL256E U/D 110ns VCC=2.7~3.6V, V I/O=1.65 to Vcc - Page access time - MX29GL256E H/L 25ns - MX29GL256E U/D 30ns - Fast program time 10us/word - Fast erase time 0.5s/sector • Low Power Consumption - Low active read current 10mA typical at 5MHz - Low standby current 20uA typical • Typical 100,000 erase/program cycle • 20 years data retention SOFTWARE FEATURES • Program/Erase Suspend & Program/Erase Resume - Suspends sector erase operation to read data from or program data to another sector which is not being erased - Suspends sector program operation to read data from another sector which is not being program • Status Reply - Data# Polling & Toggle bits provide detection of program and erase operation completion • Support Common Flash Interface CFI HARDWARE FEATURES • Ready/Busy# RY/BY# Output - Provides a hardware method of detecting program and erase operation completion • Hardware Reset# Input - Provides a hardware method to reset the internal state machine to read mode • WP#/ACC input pin - Hardware write protect pin/Provides accelerated program capability P/N:PM1499 MX29GL256E PACKAGE • 56-Pin TSOP • 64-Ball FBGA 10mm x 13mm • 64-Ball LFBGA 11mm x 13mm • 70-Pin SSOP • All devices are RoHS Compliant and Halogen-free PIN CONFIGURATION 56 TSOP RESET# WP#/ACC RY/BY# BYTE# Q15/A-1 VI/O 64 FBGA/64 LFBGA BYTE# Q15/ RES- WP#/ P/N:PM1499 MX29GL256E 70 SSOP BYTE# WP#/ACC RESET# Q15/A-1 PIN DESCRIPTION LOGIC SYMBOL SYMBOL PIN NAME A0~A23 Address Input Q0~Q14 Q15/A-1 ORDERING INFORMATION PART NO. MX29GL256EHMC-90Q * MX29GL256EHXFI-90Q MX29GL256ELXFI-90Q MX29GL256EHXCI-90Q MX29GL256ELXCI-90Q MX29GL256EHT2I-90Q MX29GL256ELT2I-90Q MX29GL256EUXFI-11G MX29GL256EDXFI-11G MX29GL256EUT2I-11G MX29GL256EDT2I-11G ACCESS TIME ns 90 110 Note * 70-pin SSOP only for Pachinko Socket. MX29GL256E PACKAGE 70 Pin SSOP 64 LFBGA 64 LFBGA 64 FBGA 64 FBGA 56 Pin TSOP 56 Pin TSOP 64 LFBGA 64 LFBGA 56 Pin TSOP 56 Pin TSOP Remark VI/O=VCC VI/O=VCC VI/O=VCC VI/O=VCC VI/O=VCC VI/O=VCC VI/O=VCC VI/O=1.65 to VCC VI/O=1.65 to VCC VI/O=1.65 to VCC VI/O=1.65 to VCC P/N:PM1499 MX29GL256E PART NAME DESCRIPTION MX 29 GL 256 E H T2 I OPTION Q RoHS compliant with restricted Vcc 3.0V~3.6V Note 1 G RoHS compliant with Vcc 2.7V~3.6V SPEED 90 90ns 11 110ns TEMPERATURE RANGE I Industrial -40° C to 85° C PACKAGE T2 56-TSOP M 70SSOP XF LFBGA 11mm x 13mm XC FBGA 10mm x 13mm PRODUCT TYPE Protection when WP#=VIL H VI/O=VCC=2.7 to 3.6V, Highest Address Sector Protected L VI/O=VCC=2.7 to 3.6V, Lowest Address Sector Protected U VI/O=1.65 to VCC, VCC=2.7 to 3.6V, Highest Address Sector Protected D VI/O=1.65 to VCC, VCC=2.7 to 3.6V, Lowest Address Sector Protected DENSITY & MODE 256 256Mb x8/x16 Architecture TYPE GL 3V Page Mode DEVICE 29:Flash Note 1 90Q covers 2.7V~3.6V for 100ns and 3.0V~3.6V for 90ns P/N:PM1499 PACKAGE INFORMATION MX29GL256E P/N:PM1499 MX29GL256E P/N:PM1499 MX29GL256E P/N:PM1499 MX29GL256E P/N:PM1499 MX29GL256E Added overshoot & undershoot specifications Removed "Preliminary" Changed data retention from 10 years to 20 years Modified Tdf max. = 20ns Page P4 P41 P2,65 P44 Date APR/28/2009 Added 1.8V VI/O information P2,41,44 JUN/29/2009 P68,69

PDF Datasheet Preview

MX29GL256E

MX29GL256E DATASHEET
The MX29GL256E product family is not recommended for new designs, while MX29GL256F family is suggested to replace it. Please refer to MX29GL256F datasheet for specifications and ordering information, or contact your local sales representative for additional support.

P/N:PM1499

MX29GL256E

SINGLE VOLTAGE 3V ONLY FLASH MEMORY
The MX29GL256E product family is not recommended for new designs, while MX29GL256F family is suggested to replace it. Please refer to MX29GL256F datasheet for specifications and ordering information, or contact your local sales representative for additional support.

GENERAL FEATURES
• Power Supply Operation
- to volt for read, erase, and program operations - MX29GL256E H/L VI/O=VCC=2.7V~3.6V, VI/O voltage must tight with VCC - MX29GL256E U/D VI/O=1.65V~3.6V for Input/Output
• Byte/Word mode switchable - 33,554,432 x 8 / 16,777,216 x 16
• 64KW/128KB uniform sector architecture - 256 equal sectors
• 16-byte/8-word page read buffer
• 64-byte/32-word write buffer
• Extra 128-word sector for security - Features factory locked and identifiable, and customer lockable
• Advanced sector protection function Solid and Password Protect
• Latch-up protected to 100mA from -1V to 1.5xVcc
• Low Vcc write inhibit Vcc VLKO
• Compatible with JEDEC standard - Pinout and software compatible to single power supply Flash
• Deep power down mode

PERFORMANCE
• High Performance
- Fast access time - MX29GL256E H/L 100ns VCC=2.7~3.6V , 90ns VCC=3.0~3.6V
- MX29GL256E U/D 110ns VCC=2.7~3.6V, V I/O=1.65 to Vcc - Page access time - MX29GL256E H/L 25ns
- MX29GL256E U/D 30ns - Fast program time 10us/word - Fast erase time 0.5s/sector
• Low Power Consumption - Low active read current 10mA typical at 5MHz - Low standby current 20uA typical
• Typical 100,000 erase/program cycle
• 20 years data retention

SOFTWARE FEATURES
• Program/Erase Suspend & Program/Erase Resume
- Suspends sector erase operation to read data from or program data to another sector which is not being erased - Suspends sector program operation to read data from another sector which is not being program
• Status Reply - Data# Polling & Toggle bits provide detection of program and erase operation completion
• Support Common Flash Interface CFI

HARDWARE FEATURES
• Ready/Busy# RY/BY# Output
- Provides a hardware method of detecting program and erase operation completion
• Hardware Reset# Input
- Provides a hardware method to reset the internal state machine to read mode
• WP#/ACC input pin
- Hardware write protect pin/Provides accelerated program capability

P/N:PM1499

MX29GL256E

PACKAGE
• 56-Pin TSOP
• 64-Ball FBGA 10mm x 13mm
• 64-Ball LFBGA 11mm x 13mm
• 70-Pin SSOP
• All devices are RoHS Compliant and Halogen-free

PIN CONFIGURATION
56 TSOP

RESET#

WP#/ACC

RY/BY#

BYTE#

Q15/A-1

VI/O
64 FBGA/64 LFBGA

BYTE#

Q15/

RES-

WP#/

P/N:PM1499

MX29GL256E
70 SSOP

BYTE#

WP#/ACC

RESET#

Q15/A-1

PIN DESCRIPTION

LOGIC SYMBOL

SYMBOL PIN NAME

A0~A23 Address Input

Q0~Q14 Q15/A-1
ORDERING INFORMATION

PART NO. MX29GL256EHMC-90Q * MX29GL256EHXFI-90Q MX29GL256ELXFI-90Q MX29GL256EHXCI-90Q MX29GL256ELXCI-90Q MX29GL256EHT2I-90Q MX29GL256ELT2I-90Q MX29GL256EUXFI-11G MX29GL256EDXFI-11G MX29GL256EUT2I-11G MX29GL256EDT2I-11G

ACCESS TIME ns 90 110

Note * 70-pin SSOP only for Pachinko Socket.

MX29GL256E

PACKAGE 70 Pin SSOP
64 LFBGA 64 LFBGA 64 FBGA 64 FBGA 56 Pin TSOP 56 Pin TSOP 64 LFBGA 64 LFBGA 56 Pin TSOP 56 Pin TSOP

Remark VI/O=VCC VI/O=VCC VI/O=VCC VI/O=VCC VI/O=VCC VI/O=VCC VI/O=VCC VI/O=1.65 to VCC VI/O=1.65 to VCC VI/O=1.65 to VCC VI/O=1.65 to VCC

P/N:PM1499

MX29GL256E

PART NAME DESCRIPTION

MX 29 GL 256 E H T2 I

OPTION Q RoHS compliant with restricted Vcc 3.0V~3.6V Note 1 G RoHS compliant with Vcc 2.7V~3.6V

SPEED 90 90ns 11 110ns

TEMPERATURE RANGE I Industrial -40° C to 85° C

PACKAGE T2 56-TSOP M 70SSOP XF LFBGA 11mm x 13mm XC FBGA 10mm x 13mm

PRODUCT TYPE Protection when WP#=VIL H VI/O=VCC=2.7 to 3.6V, Highest Address Sector Protected L VI/O=VCC=2.7 to 3.6V, Lowest Address Sector Protected U VI/O=1.65 to VCC, VCC=2.7 to 3.6V, Highest Address Sector Protected D VI/O=1.65 to VCC, VCC=2.7 to 3.6V, Lowest Address Sector Protected

DENSITY & MODE 256 256Mb x8/x16 Architecture

TYPE GL 3V Page Mode

DEVICE 29:Flash

Note 1 90Q covers 2.7V~3.6V for 100ns and 3.0V~3.6V for 90ns

P/N:PM1499

PACKAGE INFORMATION

MX29GL256E

P/N:PM1499

MX29GL256E

P/N:PM1499

MX29GL256E

P/N:PM1499

MX29GL256E

P/N:PM1499

MX29GL256E

Added overshoot & undershoot specifications

Removed "Preliminary"

Changed data retention from 10 years to 20 years

Modified Tdf max. = 20ns

Page P4 P41 P2,65 P44

Date APR/28/2009

Added 1.8V VI/O information

P2,41,44 JUN/29/2009

P68,69

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MX29GL256EHT2I-90Q Datasheet file may be downloaded here without warranties.

Datasheet ID: MX29GL256EHT2I-90Q 646960