MA4P7470F-1072T

MA4P7470F-1072T Datasheet

MA4P7470F-1072T

Part	Datasheet
MA4P7470F-1072T	MA4P7470F-1072T (pdf)

PDF Datasheet Preview
MA4P7470F-1072T 2000 Volt & 3000 Volt PIN Diodes MA4PK2000, MA4PK3000 • Non-Magnetic Package Suitable for MRI Applications • Rectangular MELF SMQ Ceramic Package • Hermetically Sealed • Low Rs for Lower Series Loss • Long for Low Intermodulation Distortion • Low Cj for High Series Isolation • High Average Incident Power Handling Capability Description and Applications The MA4P7470F-1072T is a surface mountable PIN diode in a non-magnetic Metal Electrode Leadless Faced MELF package.The device incorporates M/A-COM’s time proven HIPAX technology to produce a low inductance ceramic package with no ribbons or whisker wires. The package utilizes M/A-COM’s new non- magnetic plating process to provide an extremely low permeability, hermetically sealed package. Incorporated in the package is a passivated PIN diode that is full face bonded on both the cathode and anode of the chip to maximize surface area for low electrical and thermal resistance. The MA4P7470F-1072T has been comprehensively characterized both electrically and mechanically to ensure repeatable and predictable performance. This MA4P7470F1072T non-magnetic device is similar in electrical performance to the MA4P7417F-1072T magnetic part number. The diode is well suited for use in low loss, low distortion, and high power switching circuits applicable for high magnetic field environments from HF through UHF frequencies. The lower thermal resistance of this device provides excellent higher average performance at RF power incident levels up to 200 watts CW. This device is designed to meet the most rigorous electrical and mechanical requirements of MRI testing environments. Designed for Automated Assembly These SMQ PIN diodes are designed for high volume tape and reel assembly. The rectangular package design provides for highly efficient automatic pick and place assembly techniques. The parallel flat surfaces are suitable for key jaw or vacuum pickup techniques. All solderable surfaces are tin plated and compatible with reflow and vapor phase soldering methods. Absolute Maximum Ratings1 +25°C Parameter Absolute Maximum -65°C to +125°C -65°C to +150°C +175°C Continuous +265 °C for 10 seconds + 53dBm C.W. + 150mA - 800V Exceeding these limits may cause permanent damage. ADVANCED Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel • Europe Tel: is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY Data Sheets contain information regarding a product M/A-COM Technology • India Tel: • China Tel: Visit for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product s or information contained herein without notice. MA4P7470F-1072T 2000 Volt & 3000 Volt PIN Diodes MA4PK2000, MA4PK3000 Environmental Capability HIPAX devices are applicable for use in industrial and military applications and can be screened to meet the environmental requirements of MIL-STD-750, MIL-STD-202 as well as other military standards. The table below lists some of the MIL-STD 750 tests the device is designed to meet. Test High Temperature Storage Temperature Shock HTRB Moisture Resistance Gross Leak Vibration Fatigue Solderability MIL-STD-750 Method 1031 1051 1038 1021 1071 Cond. E 2046 2026 Ordering Information MA4P7470F-1072T Package Tape and Reel +150 °C, for 340 Hours -65 °C to +125 °C, 20 Cycles 80% of rated VB, +150 °C, for 96 Hours No Initial Conditioning, 85 % RH, +85° C Dye Penetrant Visual 20,000 G’s, 60 Hz, x, y, z axis Test Temperature = +245 °C ADVANCED Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel • Europe Tel: is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY Data Sheets contain information regarding a product M/A-COM Technology • India Tel: • China Tel: Visit for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product s or information contained herein without notice. MA4P7470F-1072T 2000 Volt & 3000 Volt PIN Diodes MA4PK2000, MA4PK3000 Electrical Specifications +25 °C Parameter Forward Voltage Maximum Voltage Rating Minimum Total Capacitance Maximum Series Resistance Maximum Parallel Resistance Minimum Symbol VF VR CT RS RP Carrier Lifetime Nominal I-Region Length Nominal C.W. Thermal Resistance Maximum Power Dissipation in Free Air Maximum Power Dissipation with Diode Case at Tambient Maximum Condition IF = +100mA Ir = -10uA -100V 100MHz +100mA 100MHz -10V 100MHz +6mA / -10mA 50% - 90% Voltage IH = 1A, IL = 10mA, T = 1mS IF = +100mA IF = +100mA Unit Value 1.0VDC l 800 l VDC 0.7pF Ohms 50K Ω us 140 um 13°C/W ADVANCED Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel • Europe Tel: is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY Data Sheets contain information regarding a product M/A-COM Technology • India Tel: • China Tel: Visit for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are

PDF Datasheet Preview

MA4P7470F-1072T
2000 Volt & 3000 Volt PIN Diodes MA4PK2000, MA4PK3000
• Non-Magnetic Package Suitable for MRI Applications
• Rectangular MELF SMQ Ceramic Package
• Hermetically Sealed
• Low Rs for Lower Series Loss
• Long for Low Intermodulation Distortion
• Low Cj for High Series Isolation
• High Average Incident Power Handling

Capability

Description and Applications

The MA4P7470F-1072T is a surface mountable PIN diode in a non-magnetic Metal Electrode Leadless Faced MELF package.The device incorporates M/A-COM’s time proven HIPAX technology to produce a low inductance ceramic package with no ribbons or whisker wires. The package utilizes M/A-COM’s new non- magnetic plating process to provide an extremely low permeability, hermetically sealed package. Incorporated in the package is a passivated PIN diode that is full face bonded on both the cathode and anode of the chip to maximize surface area for low electrical and thermal resistance. The MA4P7470F-1072T has been comprehensively characterized both electrically and mechanically to ensure repeatable and predictable performance. This MA4P7470F1072T non-magnetic device is similar in electrical performance to the MA4P7417F-1072T magnetic part number.

The diode is well suited for use in low loss, low distortion, and high power switching circuits applicable for high magnetic field environments from HF through UHF frequencies. The lower thermal resistance of this device provides excellent higher average performance at RF power incident levels up to 200 watts CW. This device is designed to meet the most rigorous electrical and mechanical requirements of MRI testing environments.

Designed for Automated Assembly

These SMQ PIN diodes are designed for high volume tape and reel assembly. The rectangular package design provides for highly efficient automatic pick and place assembly techniques. The parallel flat surfaces are suitable for key jaw or vacuum pickup techniques. All solderable surfaces are tin plated and compatible with reflow and vapor phase soldering methods.

Absolute Maximum Ratings1 +25°C

Parameter

Absolute Maximum
-65°C to +125°C -65°C to +150°C +175°C Continuous +265 °C for 10 seconds + 53dBm C.W.
+ 150mA - 800V

Exceeding these limits may cause permanent damage.

ADVANCED Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel
• Europe Tel:
is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY Data Sheets contain information regarding a product M/A-COM Technology
• India Tel:
• China Tel:

Visit for additional data sheets and product information.

Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

Commitment to produce in volume is not guaranteed.
changes to the product s or information contained herein without notice.

MA4P7470F-1072T
2000 Volt & 3000 Volt PIN Diodes MA4PK2000, MA4PK3000

Environmental Capability

HIPAX devices are applicable for use in industrial and military applications and can be screened to meet the environmental requirements of MIL-STD-750, MIL-STD-202 as well as other military standards. The table below lists some of the MIL-STD 750 tests the device is designed to meet.

Test

High Temperature Storage Temperature Shock HTRB Moisture Resistance Gross Leak Vibration Fatigue Solderability

MIL-STD-750 Method
1031 1051 1038 1021 1071 Cond. E 2046 2026
Ordering Information

MA4P7470F-1072T

Package

Tape and Reel
+150 °C, for 340 Hours -65 °C to +125 °C, 20 Cycles 80% of rated VB, +150 °C, for 96 Hours No Initial Conditioning, 85 % RH, +85° C

Dye Penetrant Visual 20,000 G’s, 60 Hz, x, y, z axis Test Temperature = +245 °C

ADVANCED Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel
• Europe Tel:
is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY Data Sheets contain information regarding a product M/A-COM Technology
• India Tel:
• China Tel:

Visit for additional data sheets and product information.

Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

Commitment to produce in volume is not guaranteed.
changes to the product s or information contained herein without notice.

MA4P7470F-1072T
2000 Volt & 3000 Volt PIN Diodes MA4PK2000, MA4PK3000

Electrical Specifications +25 °C

Parameter Forward Voltage Maximum

Voltage Rating Minimum Total Capacitance Maximum Series Resistance Maximum Parallel Resistance Minimum

Symbol VF VR CT RS RP

Carrier Lifetime Nominal

I-Region Length Nominal

C.W. Thermal Resistance Maximum

Power Dissipation in Free Air Maximum

Power Dissipation with Diode Case at Tambient Maximum

Condition IF = +100mA

Ir = -10uA -100V 100MHz +100mA 100MHz -10V 100MHz +6mA / -10mA 50% - 90% Voltage

IH = 1A, IL = 10mA,

T = 1mS

IF = +100mA

IF = +100mA

Unit Value 1.0VDC
l 800 l VDC 0.7pF

Ohms 50K Ω us 140 um 13°C/W

ADVANCED Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel
• Europe Tel:
is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY Data Sheets contain information regarding a product M/A-COM Technology
• India Tel:
• China Tel:

Visit for additional data sheets and product information.

Solutions has under development. Performance is based on engineering tests. Specifications are

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MA4P7470F-1072T Datasheet file may be downloaded here without warranties.

Datasheet ID: MA4P7470F-1072T 646850