CBT-90-UV-C11-GA400-22

CBT-90-UV-C11-GA400-22 Datasheet

CBT-90-UV-405 LEDs

Part	Datasheet
CBT-90-UV-C11-GA400-22	CBT-90-UV-C11-GA400-22 (pdf)

PDF Datasheet Preview
CBT-90-UV-405 LEDs CBT-90C-UBTV--142005PPrroodduucctt Datasheet PreliminaryPrDealitmasinhaereyt Table of Contents Technology Overview. 2 Optical & Electrical Characteristics. 3 Flux & Spectral Characteristics vs. Temperature. 4 Lifetime & Power Maintenance. 5 Radiation Patterns 6 Thermal Resistance 6 Mechanical Dimensions. 7 Ordering Information 8 Features: • W of optical power from 400 nm to 410 nm. • High thermal conductivity package ›› Junction to heat sink thermal resistance of °C/W • Photonic lattice technology for very high power density and uniform emission • Large, monolithic chip with surface emitting area of 9 mm2 • Low-profile window for efficient coupling into small-etendue systems • High radiometric efficiency • Environmentally friendly RoHS compliant, mercury-free • Variable drive currents less than 1 A through A • Spot-curing • Inspection • Machine Vision • Fiber-coupled illumination • Rapid Prototyping and 3D printing • Medical and Scientific Instrumentation Luminus Devices, Inc. • T • 1100 Technology Park Drive • Billerica, MA 01821 CBT-90-UV-405 Product Datasheet Preliminary Technology Overview Luminus Big Chip LEDs benefit from innovations in device technology, chip packaging and thermal management. This suite of technologies give engineers and system designers the freedom to develop solutions both high in power and efficiency. Photonic Lattice Technology Luminus’ photonic lattice technology enables large area LED chips to emit photons uniformly over the entire LED chip surface. The intense optical power density produced by these UV Big Chip LEDs facilitate designs which replace arc and halogen lamps where arrays of traditional high power LEDs cannot. For UV devices, Luminus engineers the photonic lattice to maximize light extraction and to emit with a Lambertian far-field distribution pattern. The design maximizes efficiency and allows for flexible optical designs. Packaging Technology Thermal management is critical in high power LED applications. With a thermal resistance from junction to heat sink of 0.9°C/W, Luminus CBT-90-UV LEDs have the lowest thermal resistance of any LED on the market. This allows the LED to be driven at higher current densities while maintaining a low junction temperature, thereby resulting in brighter solutions and longer lifetimes. Reliability Designed from the ground up, Luminus Big Chip LEDs are one of the most reliable light sources in the world today. Big Chip LEDs have passed a rigorous suite of environmental and mechanical stress tests, including mechanical shock, vibration, temperature cycling and humidity, and have been fully qualified for use in extreme high power and high current applications. With very low failure rates and median lifetimes that typically exceed 10,000 hours, Luminus Big Chip LEDs are ready for even the most demanding applications. Environmental Benefits Luminus LEDs help reduce power consumption and the amount of hazardous waste entering the environment. All Big Chip LED products manufactured by Luminus are RoHS compliant and free of hazardous materials, including lead and mercury. Understanding Big Chip LED Test Specifications Every Luminus LED is fully tested to ensure that it meets the high quality standards expected from Luminus’products. Testing Temperature Luminus core board products are typically measured in such a way that the characteristics reported agree with how the devices will actually perform when incorporated into a system. This measurement is accomplished by mounting the devices on a 40ºC heat sink and allowing the device to reach thermal equilibrium while fully powered. Only after the device reaches equilibrium are the measurements taken. This method of measurement ensures that Luminus Big Chip LEDs perform in the field just as they are specified. Multiple Operating Points 1 A, 9 A, A The tables on the following pages provide typical optical and electrical characteristics. Since the LEDs can be operated over a wide range of drive conditions currents from <1A to A, and duty cycle from <1% to 100% , multiple drive conditions are listed. CBT-90-UV devices are production specified at 9 A and A. Driving devices beyond recommended driving conditions shortens lifetime see derating curves on page Luminus Devices, Inc. • T • 1100 Technology Park Drive • Billerica, MA 01821 CBT-90-UV-405 Product Datasheet CBT-120 Product Datasheet Preliminary Reference Optical & Electrical Characteristics Ths = 40°C 1,2 Drive Condition Parameter Current Density Forward Voltage Radiometric Flux5 Radiometric Flux Density Wavelength Range Peak Wavelength FWHM VF min VF VF max λ λp 399 - 409 404 12 UV 9A Values4 400 - 410 405 13 401 - 411 406 14 Unit A/mm2 V W/mm2 nm Emitting Area Emitting Area Dimensions Dynamic Resistance Absolute Maximum Ratings Symbol Ωdyn UV 9 3x3 Unit mm2 mm x mm Unit Dimensions L x W x H, mm 560 x 560 x 200 Luminus Devices, Inc. • T • 1100 Technology Park Drive • Billerica, MA 01821 CBT-90-UV-405 Product Datasheet Preliminary History of Changes Description of Change ULTRAVIOLET RADIATION Avoid eye and skin exposure The products, their specifications and other information appearing in this document are subject to change by Luminus Devices without notice. Luminus Devices assumes no liability for errors that may appear in this document, and no liability otherwise arising from the application or use of the product or information contained herein. None of the information provided herein should be considered to be a representation of the fitness or suitability of the product for any particular application or as any other form of warranty. Luminus Devices’product warranties are limited to only such warranties as accompany a purchase contract or purchase order for such products. Nothing herein is to be construed as constituting an additional warranty. No information contained in this publication may be considered as a waiver by Luminus Devices of any intellectual property rights that Luminus Devices may have in such information. Big Chip LEDs is a registered trademark of Luminus Devices, Inc., all rights reserved. This product is protected by U.S. Patents 6,831,302 7,074,631 7,083,993 7,084,434 7,098,589 7,105,861 7,138,666 7,166,870 7,166,871 7,170,100 7,196,354 7,211,831 7,262,550 7,274,043 7,301,271 7,341,880 7,344,903 7,345,416 7,348,603 7,388,233 7,391,059 Patents Pending in the U.S. and other countries. Luminus Devices, Inc. • T • 1100 Technology Park Drive • Billerica, MA 01821

PDF Datasheet Preview

CBT-90-UV-405 LEDs

CBT-90C-UBTV--142005PPrroodduucctt Datasheet PreliminaryPrDealitmasinhaereyt

Table of Contents

Technology Overview. 2

Optical & Electrical Characteristics. 3

Flux & Spectral Characteristics vs. Temperature. 4

Lifetime & Power Maintenance. 5

Radiation Patterns 6

Thermal Resistance 6

Mechanical Dimensions. 7
Ordering Information 8

Features:
• W of optical power from 400 nm to 410 nm.
• High thermal conductivity package
›› Junction to heat sink thermal resistance of °C/W
• Photonic lattice technology for very high power density and uniform emission
• Large, monolithic chip with surface emitting area of 9 mm2
• Low-profile window for efficient coupling into small-etendue systems
• High radiometric efficiency
• Environmentally friendly RoHS compliant, mercury-free
• Variable drive currents less than 1 A through A
• Spot-curing
• Inspection
• Machine Vision
• Fiber-coupled illumination
• Rapid Prototyping and 3D printing
• Medical and Scientific Instrumentation

Luminus Devices, Inc.
• T
• 1100 Technology Park Drive
• Billerica, MA 01821

CBT-90-UV-405 Product Datasheet Preliminary

Technology Overview

Luminus Big Chip LEDs benefit from innovations in device technology, chip packaging and thermal management. This suite of technologies give engineers and system designers the freedom to develop solutions both high in power and efficiency.

Photonic Lattice Technology Luminus’ photonic lattice technology enables large area LED chips to emit photons uniformly over the entire LED chip surface. The intense optical power density produced by these UV Big Chip LEDs facilitate designs which replace arc and halogen lamps where arrays of traditional high power LEDs cannot.

For UV devices, Luminus engineers the photonic lattice to maximize light extraction and to emit with a Lambertian far-field distribution pattern. The design maximizes efficiency and allows for flexible optical designs.

Packaging Technology Thermal management is critical in high power LED applications. With a thermal resistance from junction to heat sink of 0.9°C/W, Luminus CBT-90-UV LEDs have the lowest thermal resistance of any LED on the market. This allows the LED to be driven at higher current densities while maintaining a low junction temperature, thereby resulting in brighter solutions and longer lifetimes.

Reliability Designed from the ground up, Luminus Big Chip LEDs are one of the most reliable light sources in the world today. Big Chip LEDs have passed a rigorous suite of environmental and mechanical stress tests, including mechanical shock, vibration, temperature cycling and humidity, and have been fully qualified for use in extreme high power and high current applications. With very low failure rates and median lifetimes that typically exceed 10,000 hours, Luminus Big Chip LEDs are ready for even the most demanding applications.

Environmental Benefits Luminus LEDs help reduce power consumption and the amount of hazardous waste entering the environment. All Big Chip LED products manufactured by Luminus are RoHS compliant and free of hazardous materials, including lead and mercury.

Understanding Big Chip LED Test Specifications

Every Luminus LED is fully tested to ensure that it meets the high quality standards expected from Luminus’products.

Testing Temperature

Luminus core board products are typically measured in such a way that the characteristics reported agree with how the devices will actually perform when incorporated into a system. This measurement is accomplished by mounting the devices on a 40ºC heat sink and allowing the device to reach thermal equilibrium while fully powered. Only after the device reaches equilibrium are the measurements taken. This method of measurement ensures that Luminus Big Chip LEDs perform in the field just as they are specified.

Multiple Operating Points 1 A, 9 A, A

The tables on the following pages provide typical optical and electrical characteristics. Since the LEDs can be operated over a wide range of drive conditions currents from <1A to A, and duty cycle from <1% to 100% , multiple drive conditions are listed.

CBT-90-UV devices are production specified at 9 A and A. Driving devices beyond recommended driving conditions shortens lifetime see derating curves on page

Luminus Devices, Inc.
• T
• 1100 Technology Park Drive
• Billerica, MA 01821

CBT-90-UV-405 Product Datasheet CBT-120 Product Datasheet Preliminary

Reference Optical & Electrical Characteristics Ths = 40°C 1,2

Drive Condition Parameter Current Density

Forward Voltage

Radiometric Flux5 Radiometric Flux Density Wavelength Range Peak Wavelength FWHM

VF min VF

VF max
λ λp
399 - 409 404 12

UV 9A Values4
400 - 410 405 13
401 - 411 406 14

Unit A/mm2

V W/mm2 nm

Emitting Area Emitting Area Dimensions Dynamic Resistance Absolute Maximum Ratings

Symbol Ωdyn

UV 9 3x3

Unit mm2 mm x mm

Unit
Dimensions L x W x H, mm
560 x 560 x 200

Luminus Devices, Inc.
• T
• 1100 Technology Park Drive
• Billerica, MA 01821

CBT-90-UV-405 Product Datasheet Preliminary

History of Changes

Description of Change

ULTRAVIOLET

RADIATION

Avoid eye and skin exposure

The products, their specifications and other information appearing in this document are subject to change by Luminus Devices without notice. Luminus Devices assumes no liability for errors that may appear in this document, and no liability otherwise arising from the application or use of the product or information contained herein. None of the information provided herein should be considered to be a representation of the fitness or suitability of the product for any particular application or as any other form of warranty. Luminus Devices’product warranties are limited to only such warranties as accompany a purchase contract or purchase order for such products. Nothing herein is to be construed as constituting an additional warranty. No information contained in this publication may be considered as a waiver by Luminus Devices of any intellectual property rights that Luminus Devices may have in such information. Big Chip LEDs is a registered trademark of Luminus Devices, Inc., all rights reserved.

This product is protected by U.S. Patents 6,831,302 7,074,631 7,083,993 7,084,434 7,098,589 7,105,861 7,138,666 7,166,870 7,166,871 7,170,100 7,196,354 7,211,831 7,262,550 7,274,043 7,301,271 7,341,880 7,344,903 7,345,416 7,348,603 7,388,233 7,391,059 Patents Pending in the U.S. and other countries.

Luminus Devices, Inc.
• T
• 1100 Technology Park Drive
• Billerica, MA 01821

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CBT-90-UV-C11-GA400-22 Datasheet file may be downloaded here without warranties.

Datasheet ID: CBT-90-UV-C11-GA400-22 646686