S2S1RP

S2S1RP Datasheet

S2S1 S4S1

Part	Datasheet
S2S1RP	S2S1RP (pdf)

Related Parts	Information
EC103B3	EC103B3
S2S3RP	S2S3RP
EC103BRP	EC103BRP
EC103B1RP	EC103B1RP
EC103B1AP	EC103B1AP
EC103B2AP	EC103B2AP
S2S2RP	S2S2RP
EC103B	EC103B
S2SRP	S2SRP
EC103B1	EC103B1
EC103B2	EC103B2

PDF Datasheet Preview
TO-92 TO-202 3-lead Compak TO-220 Isolated TO-252 D-Pak TO-251 V-Pak Sensitive SCRs A to 10 A RoHS The Teccor line of sensitive SCR semiconductors are half-wave unidirectional, gate-controlled rectifiers SCR-thyristor which complement Teccor's line of power SCRs. This group of packages offers ratings of A to 10 A, and 200 V to 600 V with gate sensitivities of 12 µA to 500 µA. For gate currents in the 10 mA to 50 mA ranges, see “SCRs” section of this catalog. The TO-220 and TO-92 are electrically isolated where the case or tab is internally isolated to allow the use of low-cost assembly and convenient packaging techniques. Teccor's line of SCRs features glass-passivated junctions to ensure long-term device reliability and parameter stability. Teccor's glass offers a rugged, reliable barrier against junction contamination. Tape-and-reel packaging is available for the TO-92 package. Consult the factory for more information. Variations of devices covered in this data sheet are available for custom design applications. Consult the factory for more information. • RoHS Compliant • Electrically-isolated TO-220 package • High voltage capability up to 600 V • High surge capability up to 100 A • Glass-passivated chip Compak Features • Surface mount package A series • New small-profile three-leaded Compak package • Four gate sensitivities available • Packaged in embossed carrier tape with 2,500 devices per reel • Can replace SOT-223 2004 Littelfuse, Inc. Thyristor Product Catalog E5 - 1 +1 972-580-7777 Sensitive SCRs Data Sheets TYPE TO-92 Non-isolated TO-202 TO-251 V-Pak Compak TO-252 D-Pak See “Package Dimensions” section for variations. 11 S2S1 S4S1 S6S1 S2S2 S4S2 S6S2 S2S3 S4S3 S6S3 EC103B EC103D EC103M EC103B1 11 See package outlines for lead form configurations. When ordering special lead forming, add type number as suffix to part number. 12 VD = 6 V dc, RL = 100 See Figure E5.19 for simple test circuit for measuring gate trigger voltage and gate trigger current. 13 See Figure E5.1 through Figure E5.9 for maximum allowable case temperature at maximum rated current. 14 IGT = 500 µA maximum at TC = -40 °C for T106 devices 15 IH = 10 mA maximum at TC = -65 °C for 2N5064 Series and 2N6565 Series devices 16 IH = 6 mA maximum at TC = -40 °C for T106 devices 17 Pulse Width µs 18 IGT = 350 µA maximum at TC = -65 °C for 2N5064 Series and 2N6565 Series devices 19 Latching current can be higher than 20 mA for higher IGT types. Also, latching current can be much higher at -40 °C. See Figure E5.18. 20 TC or TL = TJ for test conditions in off state 21 IDRM and IRRM = 50 µA for 2N5064 and 100 µA for 2N6565 at 125 °C 22 TO-92 devices specified at -65 °C instead of -40 °C 23 TC = 110 °C 2004 Littelfuse, Inc. Thyristor Product Catalog E5 - 5 +1 972-580-7777 Sensitive SCRs Package Code Thermal Resistance Steady State JA] °C/W TYPICAL Data Sheets Type TO-92 TO-220 TO-202 Type 2, 4, & 41 75 [160] 50 [160] [65] 10 [100] Mounted on 1 cm2 copper foil surface two-ounce copper foil TO-202 Type 1 & 3 [80] Compak 60* TO-252 D-Pak TO-251 V-Pak [85] Electrical Isolation Teccor’s isolated sensitive SCRs will withstand a minimum high potential test of 2500 V ac rms from leads to mounting tab over the device's operating temperature range. The following table shows other standard and optional isolation ratings. Electrical Isolation * from Leads to Mounting Tab V AC RMS TO-220 2500 Standard

PDF Datasheet Preview

TO-92

TO-202
3-lead Compak
*TO-220 Isolated

TO-252 D-Pak

TO-251 V-Pak

Sensitive SCRs

A to 10 A RoHS

The Teccor line of sensitive SCR semiconductors are half-wave unidirectional, gate-controlled rectifiers SCR-thyristor which complement Teccor's line of power SCRs. This group of packages offers ratings of A to 10 A, and 200 V to 600 V with gate sensitivities of 12 µA to 500 µA. For gate currents in the 10 mA to 50 mA ranges, see “SCRs” section of this catalog.

The TO-220 and TO-92 are electrically isolated where the case or tab is internally isolated to allow the use of low-cost assembly and convenient packaging techniques.

Teccor's line of SCRs features glass-passivated junctions to ensure long-term device reliability and parameter stability. Teccor's glass offers a rugged, reliable barrier against junction contamination.

Tape-and-reel packaging is available for the TO-92 package. Consult the factory for more information.

Variations of devices covered in this data sheet are available for custom design applications. Consult the factory for more information.
• RoHS Compliant
• Electrically-isolated TO-220 package
• High voltage capability up to 600 V
• High surge capability up to 100 A
• Glass-passivated chip

Compak Features
• Surface mount package A series
• New small-profile three-leaded Compak package
• Four gate sensitivities available
• Packaged in embossed carrier tape with 2,500
devices per reel
• Can replace SOT-223
2004 Littelfuse, Inc. Thyristor Product Catalog

E5 - 1
+1 972-580-7777

Sensitive SCRs

Data Sheets

TYPE

TO-92

Non-isolated

TO-202

TO-251 V-Pak

Compak

TO-252 D-Pak

See “Package Dimensions” section for variations. 11

S2S1 S4S1

S6S1 S2S2

S4S2

S6S2

S2S3

S4S3

S6S3

EC103B

EC103D

EC103M

EC103B1
11 See package outlines for lead form configurations. When ordering special lead forming, add type number as suffix to part number.
12 VD = 6 V dc, RL = 100 See Figure E5.19 for simple test circuit for measuring gate trigger voltage and gate trigger current.
13 See Figure E5.1 through Figure E5.9 for maximum allowable case temperature at maximum rated current.
14 IGT = 500 µA maximum at TC = -40 °C for T106 devices
15 IH = 10 mA maximum at TC = -65 °C for 2N5064 Series and 2N6565 Series devices
16 IH = 6 mA maximum at TC = -40 °C for T106 devices
17 Pulse Width µs
18 IGT = 350 µA maximum at TC = -65 °C for 2N5064 Series and 2N6565 Series devices
19 Latching current can be higher than 20 mA for higher IGT types. Also, latching current can be much higher at -40 °C. See Figure E5.18.
20 TC or TL = TJ for test conditions in off state
21 IDRM and IRRM = 50 µA for 2N5064 and 100 µA for 2N6565 at 125 °C
22 TO-92 devices specified at -65 °C instead of -40 °C
23 TC = 110 °C
2004 Littelfuse, Inc. Thyristor Product Catalog

E5 - 5
+1 972-580-7777

Sensitive SCRs

Package Code

Thermal Resistance Steady State JA] °C/W TYPICAL

Data Sheets

Type

TO-92

TO-220

TO-202 Type 2, 4, & 41
75 [160] 50 [160]
[65]
10 [100]
*Mounted on 1 cm2 copper foil surface two-ounce copper foil

TO-202 Type 1 & 3
[80]

Compak 60*

TO-252 D-Pak

TO-251 V-Pak
[85]

Electrical Isolation

Teccor’s isolated sensitive SCRs will withstand a minimum high potential test of 2500 V ac rms from leads to mounting tab over the device's operating temperature range. The following table shows other standard and optional isolation ratings.

Electrical Isolation * from Leads to Mounting Tab

V AC RMS

TO-220
2500

Standard

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived S2S1RP Datasheet file may be downloaded here without warranties.

Datasheet ID: S2S1RP 646543