A1220UC4RP

A1220UC4RP Datasheet

A1220U_4L

Part	Datasheet
A1220UC4RP	A1220UC4RP (pdf)

Related Parts	Information
A1225UC4RP	A1225UC4RP
A1225UB4RP	A1225UB4RP
A1220UB4RP	A1220UB4RP
A1220UA4RP	A1220UA4RP
A1225UA4RP	A1225UA4RP
A1225UC4TP	A1225UC4TP
A1220UC4TP	A1220UC4TP
A1220UA4TP	A1220UA4TP
A1220UB4LTP	A1220UB4LTP
A1220UB4LRP	A1220UB4LRP

PDF Datasheet Preview
Series SIDACtor Devices LCAS Asymmetrical Multiport Device This is an integrated multichip asymmetrical solution for protecting multiple twisted pair from overvoltage conditions. Based on a six-pin surface mount SOIC package, it is T2 equivalent to four discrete DO-214AA or two TO-220 packages. Available in surge 5 current ratings up to 500 A, the multiport line protector is ideal for densely populated G2 line cards that cannot afford PCB inefficiencies or the use of series power resistors. 4 For a diagram of an LCAS Line Circuit Access Switch application, see the following R2 illustrations in Section 6, “Reference Designs” of this Telecom Design Guide: Figure through Figure and Figure Electrical Parameters Part Number * A1220U_4L A1225U_4L VDRM Volts VS Volts Pins 3-2, 6-5 VDRM Volts VS Volts Pins 1-2, 4-5 VT Volts IDRM µAmps IS mAmps IT Amps IH mAmps * “L” in part number indicates RoHS compliance. For non-RoHS compliant device, delete “L” from part number. For individual “UA”, “UB”, and “UC” surge ratings, see table below. Surge Ratings in Amps 0.2x310 * 2x10 * 8x20 * 10x160 * 10x560 * 5x320 * 10x360 * 10x1000 * 5x310 * ITSM 0.5x700 2x10 1.2x50 10x160 10x560 9x720 10x360 10x1000 10x700 ** 50 / 60 Hz di/dt Amps Amps Amps Amps Amps/µs * Current waveform in µs ** Voltage waveform in µs Telecom Design Guide • 2006 Littelfuse 3 - 57 Thermal Considerations Package Modified MS-013 Symbol TJ TS

PDF Datasheet Preview

Series SIDACtor Devices

LCAS Asymmetrical Multiport Device

This is an integrated multichip asymmetrical solution for protecting multiple twisted pair
from overvoltage conditions. Based on a six-pin surface mount SOIC package, it is

T2 equivalent to four discrete DO-214AA or two TO-220 packages. Available in surge
5 current ratings up to 500 A, the multiport line protector is ideal for densely populated

G2 line cards that cannot afford PCB inefficiencies or the use of series power resistors.
4 For a diagram of an LCAS Line Circuit Access Switch application, see the following

R2 illustrations in Section 6, “Reference Designs” of this Telecom Design Guide:

Figure through Figure and

Figure

Electrical Parameters

Part Number *

A1220U_4L

A1225U_4L

VDRM Volts

VS Volts

Pins 3-2, 6-5

VDRM Volts

VS Volts

Pins 1-2, 4-5

VT Volts

IDRM µAmps

IS mAmps

IT Amps

IH mAmps
* “L” in part number indicates RoHS compliance. For non-RoHS compliant device, delete “L” from part number. For individual “UA”, “UB”, and “UC” surge ratings, see table below.

Surge Ratings in Amps
0.2x310 * 2x10 * 8x20 * 10x160 * 10x560 * 5x320 * 10x360 * 10x1000 * 5x310 * ITSM 0.5x700 ** 2x10 ** 1.2x50 ** 10x160 ** 10x560 ** 9x720 ** 10x360 ** 10x1000 ** 10x700 ** 50 / 60 Hz di/dt

Amps

Amps

Amps

Amps

Amps/µs
* Current waveform in µs ** Voltage waveform in µs

Telecom Design Guide
• 2006 Littelfuse
3 - 57

Thermal Considerations

Package

Modified MS-013

Symbol TJ TS

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived A1220UC4RP Datasheet file may be downloaded here without warranties.

Datasheet ID: A1220UC4RP 646425