022901.5H

022901.5H Datasheet

Part	Datasheet
022901.5H	022901.5H (pdf)

Related Parts	Information
02291.25H	02291.25H
0229.350H	0229.350H
02292.25H	02292.25H
0229.600H	0229.600H
0229006.H	0229006.H
0229.800M	0229.800M
0229007.H	0229007.H
0229.250H	0229.250H
0229.375H	0229.375H
0229.500H	0229.500H
0229001.H	0229001.H
0229002.H	0229002.H
022902.5H	022902.5H
0229003.H	0229003.H
022903.5H	022903.5H
0229005.H	0229005.H
0230005.H	0230005.H
0229.750H	0229.750H
0229004.H	0229004.H

PDF Datasheet Preview
Axial Lead and Cartridge Fuses Subminiature Glass Body 2AG Fuse 229/230 Series The 2AG fuses are available in cartridge form or with axial leads. Axial leaded fuses are board washable. 2AG fuses provide the same performance characteristics as their 3AG counterpart, while occupying one-third the space. Sleeved fuses are available. ELECTRICAL CHARACTERISTICS: % of Ampere Rating 110% 135% 200% Opening Time 4 hours, Minimum 1 hour, Maximum 3 seconds, Minimum 20 seconds, Maximum AGENCY APPROVALS Listed by Underwriters Laboratories and Certified by CSA through amperes. Recognized under the Components Program of Underwriters Laboratories from 4 through 7 amperes. 1 through 7 amperes approved by METI. AGENCY FILE NUMBERS UL E10480, CSA LR INTERRUPTING RATINGS: 10,000 amperes at 125VAC 400 amperes at 125VAC 35 amperes at 250VAC 100 amperes at 250VAC PACKAGING OPTIONS 230 Series available on Tape and Reel per EIA-296. For 1500 pieces per reel, add packaging suffix DRT1W. See page 8 for pitch dimensions. 229 and 230 series available in bulk pack- aging. For 1000 pieces bulk, add packaging suffix M. 229 000 Series 230 000 Series TYP. Axial Lead Material Solder coated copper. Average Time Current Curves 1/4A 3/8A 1/2A 3/4A 1A 1/2A 2 1/2A 3A 3 1/2A 4A 5A 7A 1000 ORDERING INFORMATION: Cartridge Catalog Number 229 001 229 002 229 003 229 004 229 005 229 006 229 007 Axial Lead Catalog Number 230 001 230 002 230 003 230 004 230 005 230 006 230 007 Ampere Rating 1/4 3/8 1/2 6/10 3/4 8/10 1 11/4 11/2 21/4 21/2 3 31/2 4 5 6 7 Voltage Rating 250 125 Nominal Resistance Cold Ohms Nominal Melting I2t A2 Sec. TIME IN SECONDS 100 10 1 CURRENT IN AMPERES 1000 AXIAL LEAD AND CARTRIDGE FUSES Axial Lead and Cartridge Fuses Subminiature Glass Body 2AG Fuse 229/230 Series SURGE WITHSTAND SPECIFICATIONS INDICATING FUSE Our standard 229 and 230 Series fuses meet the demanding requirements of the Telecom industry. These Fuses combine conventional overcurrent protection with the ability to withstand high current, short duration pulses. These fuses comply with the short circuit requirements of UL 1459 for telephone equipment. Insulating Sleeve Option available. We have characterized these fuses for the Telecom industry requirements as shown below. ELECTRICAL CHARACTERISTICS: Short Circuit Capabilities: UL 60950 UL 1459 Included 60A, 600VAC 40A, 600VAC 600VAC 2.2A, 600VAC • Meets UL 497 Specifications PEAK WITHSTAND CURRENT lp These fuses will withstand 50 repetitions of a double exponential impulse wave having peak currents lp and peak voltages as listed. The 2AG Indicating fuse instantly identifies itself upon opening by showing a discoloration of its glass body. Guesswork and time consuming circuit testing are eliminated. This unique design offers the same quality performance characteristics as the standard 2AG fuse design. Cartridge Catalog Number 229 001 229 Axial Lead Catalog Number 230 001 230 10 x 160 * When ordering the 2AG Indicating Slo-Blo Fuse, an ‘S’ is required after the catalog number. Example -1A Indicating Fuse = 230 001S 2AG 229 /230 Series General Specifications 2AG Special Surge Withstand ENVIRONMENTAL SPECIFICATIONS Operating Temperature to 125°C. Shock MIL-STD-202, Method 213, Test Condition I 100 G’s peak for 6 milliseconds . Vibration MIL-STD-202, Method 201 Hz, inches total excursion . Salt Spray MIL-STD-202 Method 101, Test Condition B 48 hours . Insulation Resistance After Opening MIL-STD-202, Method 302, Test Condition B. Resistance to Soldering Heat Axial Leaded Fuses MIL-STD-202, Method 210A, Test Condition B 260°C, 3 Seconds . Thermal Shock MIL-STD-202, Method 107, Test Condition B to 125°C . Moisture Resistance MIL-STD-202, Method 106 90-98% RH, 65°C . Solderability Axial Leaded Fuses MIL-STD-202, Method PHYSICAL SPECIFICATIONS Materials Glass Body, Nickel-Plated Brass Fuse Caps. Insulating sleeve option available . Type AXIAL LEAD PART NUMBER 220 003 0.35A ELECTRICAL CHARACTERISTICS: Amperes 0.35A 0.6A 2.0A 6.0A Opening Time 4 hours, Minimum 90 seconds, Maximum 2 seconds, Maximum second, Maximum INTERRUPTING RATINGS Same as 230 Series. LIGHTNING SURGE WITHSTAND CAPABILITY 25 amperes peak, 800V, 10 x 560 microseconds. PATENTED Refer to page 50 for other Surge Withstand Fuses. SOLDERING PARAMETERS Wave solder 500°F 260°C , 3 seconds Max. Reflow solder Not recommended.

PDF Datasheet Preview

Axial Lead and Cartridge Fuses

Subminiature Glass Body
2AG Fuse 229/230 Series

The 2AG fuses are available in cartridge form or with axial leads. Axial leaded fuses are board washable. 2AG fuses provide the same performance characteristics as their 3AG counterpart, while occupying one-third the space. Sleeved fuses are available. ELECTRICAL CHARACTERISTICS:
% of Ampere Rating 110% 135%
200%

Opening Time
4 hours, Minimum 1 hour, Maximum 3 seconds, Minimum
20 seconds, Maximum

AGENCY APPROVALS Listed by Underwriters Laboratories and

Certified by CSA through amperes. Recognized under the

Components Program of Underwriters Laboratories from 4 through 7
amperes. 1 through 7 amperes approved by METI.

AGENCY FILE NUMBERS UL E10480, CSA LR

INTERRUPTING RATINGS:
10,000 amperes at 125VAC
400 amperes at 125VAC
35 amperes at 250VAC
100 amperes at 250VAC

PACKAGING OPTIONS 230 Series available on Tape and Reel per

EIA-296. For 1500 pieces per reel, add packaging suffix DRT1W. See
page 8 for pitch dimensions. 229 and 230 series available in bulk pack-
aging. For 1000 pieces bulk, add packaging suffix M.
229 000 Series
230 000 Series

TYP.

Axial Lead Material Solder coated copper.

Average Time Current Curves
1/4A 3/8A 1/2A 3/4A 1A 1/2A 2 1/2A 3A 3 1/2A 4A 5A 7A
1000
ORDERING INFORMATION:

Cartridge Catalog Number
229 001 229 002 229 003 229 004 229 005 229 006 229 007

Axial Lead Catalog Number
230 001 230 002 230 003 230 004 230 005 230 006 230 007

Ampere Rating
1/4 3/8 1/2 6/10 3/4 8/10
1 11/4 11/2 21/4 21/2 3 31/2 4 5 6 7

Voltage Rating
250 125

Nominal Resistance Cold Ohms

Nominal Melting I2t

A2 Sec.

TIME IN SECONDS
100 10 1

CURRENT IN AMPERES
1000

AXIAL LEAD AND CARTRIDGE FUSES

Axial Lead and Cartridge Fuses

Subminiature Glass Body
2AG Fuse 229/230 Series

SURGE WITHSTAND SPECIFICATIONS INDICATING FUSE

Our standard 229 and 230 Series fuses meet the demanding requirements of the Telecom industry. These Fuses combine conventional overcurrent protection with the ability to withstand high current, short duration pulses. These fuses comply with the short circuit requirements of UL 1459 for telephone equipment. Insulating Sleeve Option available. We have characterized these fuses for the Telecom industry requirements as shown below.

ELECTRICAL CHARACTERISTICS:

Short Circuit Capabilities:

UL 60950 UL 1459 Included 60A, 600VAC
40A, 600VAC
600VAC
2.2A, 600VAC
• Meets UL 497 Specifications

PEAK WITHSTAND CURRENT lp These fuses will withstand 50 repetitions of a double exponential impulse wave having peak currents lp and peak voltages as listed.

The 2AG Indicating fuse instantly identifies itself upon opening by showing a discoloration of its glass body. Guesswork and time consuming circuit testing are eliminated. This unique design offers the same quality performance characteristics as the standard 2AG fuse design.

Cartridge

Catalog

Number
229 001 229

Axial Lead

Catalog

Number
230 001 230
10 x 160
* When ordering the 2AG Indicating Slo-Blo Fuse, an ‘S’ is required after the catalog number.

Example -1A Indicating Fuse = 230 001S
2AG 229 /230 Series General Specifications
2AG Special Surge Withstand

ENVIRONMENTAL SPECIFICATIONS Operating Temperature to 125°C. Shock MIL-STD-202, Method 213, Test Condition I 100 G’s peak for 6 milliseconds . Vibration MIL-STD-202, Method 201 Hz, inches total excursion . Salt Spray MIL-STD-202 Method 101, Test Condition B 48 hours . Insulation Resistance After Opening MIL-STD-202, Method 302, Test Condition B. Resistance to Soldering Heat Axial Leaded Fuses MIL-STD-202, Method 210A, Test Condition B 260°C, 3 Seconds . Thermal Shock MIL-STD-202, Method 107, Test Condition B to 125°C . Moisture Resistance MIL-STD-202, Method 106 90-98% RH, 65°C . Solderability Axial Leaded Fuses MIL-STD-202, Method

PHYSICAL SPECIFICATIONS Materials Glass Body, Nickel-Plated Brass Fuse Caps. Insulating sleeve option available .

Type

AXIAL LEAD PART NUMBER 220 003 0.35A ELECTRICAL CHARACTERISTICS:

Amperes
0.35A 0.6A 2.0A 6.0A

Opening Time
4 hours, Minimum 90 seconds, Maximum 2 seconds, Maximum second, Maximum

INTERRUPTING RATINGS Same as 230 Series. LIGHTNING SURGE WITHSTAND CAPABILITY 25 amperes peak, 800V, 10 x 560 microseconds. PATENTED Refer to page 50 for other Surge Withstand Fuses.

SOLDERING PARAMETERS Wave solder 500°F 260°C , 3 seconds Max. Reflow solder Not recommended.

More datasheets: 0229.500H | 0229001.H | 0229002.H | 022902.5H | 0229003.H | 022903.5H | 0229005.H | 0230005.H | 0229.750H | 0229004.H

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 022901.5H Datasheet file may be downloaded here without warranties.

Datasheet ID: 022901.5H 646372