PA-1360-5M00

PA-1360-5M00 Datasheet

Model PA-1360-5M01

Part	Datasheet
PA-1360-5M00	PA-1360-5M00 (pdf)

PDF Datasheet Preview
Electrical Specification Model PA-1360-5M01 12V 36W single output AC adapter Issued May 21, 2013 Customer Part 90, Chien I Rd, Chung Ho city, Taipei Hsien 235, Taiwan Tel 886-2-2222-6181 Fax 886-2-2226-1922 Approve By Koson Lu Check By Tom Hsu Prepared By Sammi Pan ECN No ELECTRICAL SPECIFICATION Initial Date 5/21/2013 Model ELECTRICAL SPECIFICATION Contents Description 4 Electrical 4 Input Voltage AC 4 Input 4 Input Current 4 Inrush Current 4 Hold-Up time main interruption 4 Safety Test 4 Start 4 No load power consumption 4 Rise 4 Over-Shoot and 5 DC output 5 Output circuit protection. 5 Transient 5 Environment 5 6 Safety / EMC 6 Safety. 6 EMI for both Conduction & Radiation. 6 Reliability 6 Lifetime. 6 Burn-in 7 Vibration Test 7 M.T.B.F 7 Mechanical 7 Physical Size 7 Input 7 Output connector. 7 Outline Drawing. 8 Model ELECTRICAL SPECIFICATION Description This product is an external AC to DC adapter power transfer device it is able to provide 12V 36W single dc output with constant voltage source. Electrical Input Voltage AC a. From 100-240 Vac Nominal. b. From 90-264 Vac Maximum. Input Frequency From 47-63Hz Maximum. Input Current 1.0A max at 100Vac and dc output max load. Inrush Current 50A maximum at cold-start & 25℃ & DC output at full-load and 125Vac input. Hold-Up time main interruption requirement msec minimum at full-load and 110Vac/60Hz AC input. Efficiency. Average 25/50/75/100% load power efficiency need to >= at 115Vac and 230Vac. Test condition will be tested after full load operating for 30min then measure it. Safety Test a. Leakage current less then 0.25mA at 254Vac, 50Hz. b. Hi-pot test 3000Vac, 10mA, 3sec between Primary to Secondary. c. Insulation 500Vdc, 2Sec between Primary to Secondary circuit, IR Start Up. The output voltage shall rise from 0 volt and settle within regulation in less than 2sec, from apply of 115Vac. No load power consumption AC input power Pin shall be less than 0.3W at no load and 230Vac/50hz condition. Rise Time. That shall be less than 20msec from 10% to 90% of dc output voltage. Model ELECTRICAL SPECIFICATION Over-Shoot and under-shoot. Less than 10% of nominal DC output voltage. DC output requirement. Vout min Vout typ Vout max Ripple/noise Iout max Iout min +12V 11.4V 12.0V 12.6V 120 3000 Remark Vdc mVpp mA Ripple and Noise. Tested by dc loading side parallel with a 10uF/25V aluminum electrolytic & 0.1uF/50V Ceramic capacitor and Measured Band-Width with 20MHz. Output circuit protection. a. SCP short circuited protection with auto-recovery function. b. OCP Over current protection shall be less than 4.5A with auto-recovery function c. OVP Over voltage protection with auto-recovery function. Tripped voltage will be less than 18Vmax.

PDF Datasheet Preview

Electrical Specification

Model PA-1360-5M01
12V 36W single output AC adapter

Issued

May 21, 2013

Customer Part
90, Chien I Rd, Chung Ho city, Taipei Hsien 235, Taiwan Tel 886-2-2222-6181 Fax 886-2-2226-1922

Approve By Koson Lu

Check By Tom Hsu

Prepared By Sammi Pan

ECN No

ELECTRICAL SPECIFICATION

Initial

Date 5/21/2013

Model

ELECTRICAL SPECIFICATION

Contents

Description 4 Electrical 4 Input Voltage AC 4 Input 4 Input Current 4 Inrush Current 4 Hold-Up time main interruption 4 Safety Test 4 Start 4 No load power consumption 4 Rise 4 Over-Shoot and 5 DC output 5 Output circuit protection. 5 Transient 5 Environment 5 6 Safety / EMC 6 Safety. 6 EMI for both Conduction & Radiation. 6 Reliability 6 Lifetime. 6 Burn-in 7 Vibration Test 7 M.T.B.F 7 Mechanical 7 Physical Size 7 Input 7 Output connector. 7 Outline Drawing. 8

Model

ELECTRICAL SPECIFICATION

Description This product is an external AC to DC adapter power transfer device it is able to provide 12V 36W single dc output with constant voltage source.

Electrical

Input Voltage AC a. From 100-240 Vac Nominal. b. From 90-264 Vac Maximum.

Input Frequency From 47-63Hz Maximum.

Input Current 1.0A max at 100Vac and dc output max load.

Inrush Current 50A maximum at cold-start & 25℃ & DC output at full-load and 125Vac input.

Hold-Up time main interruption requirement msec minimum at full-load and 110Vac/60Hz AC input.

Efficiency. Average 25/50/75/100% load power efficiency need to >= at 115Vac and 230Vac. Test condition will be tested after full load operating for 30min then measure it.

Safety Test a. Leakage current less then 0.25mA at 254Vac, 50Hz. b. Hi-pot test 3000Vac, 10mA, 3sec between Primary to Secondary. c. Insulation 500Vdc, 2Sec between Primary to Secondary circuit, IR

Start Up. The output voltage shall rise from 0 volt and settle within regulation in less than 2sec, from apply of 115Vac.

No load power consumption AC input power Pin shall be less than 0.3W at no load and 230Vac/50hz condition.

Rise Time. That shall be less than 20msec from 10% to 90% of dc output voltage.

Model

ELECTRICAL SPECIFICATION

Over-Shoot and under-shoot. Less than 10% of nominal DC output voltage.

DC output requirement.

Vout min Vout typ Vout max Ripple/noise Iout max Iout min
+12V 11.4V 12.0V 12.6V 120 3000

Remark Vdc mVpp mA

Ripple and Noise. Tested by dc loading side parallel with a 10uF/25V aluminum electrolytic & 0.1uF/50V Ceramic capacitor and Measured Band-Width with 20MHz.

Output circuit protection. a. SCP short circuited protection with auto-recovery function. b. OCP Over current protection shall be less than 4.5A with auto-recovery function c. OVP Over voltage protection with auto-recovery function. Tripped voltage will be less than 18Vmax.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived PA-1360-5M00 Datasheet file may be downloaded here without warranties.

Datasheet ID: PA-1360-5M00 646325