LTL42EKEKNN

LTL42EKEKNN Datasheet

LTL42EKEKNN

Part	Datasheet
LTL42EKEKNN	LTL42EKEKNN (pdf)

PDF Datasheet Preview
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only * High luminous intensity output. * Low power consumption. * High efficiency. * Versatile mounting on P.C. Board or panel. * I.C. Compatible/low current requirement. * Popular T-1 diameter package. Package Dimensions LTL42EKEKNN Lens Water Clear Source Color AlInGaP Red Notes All dimensions are in millimeters inches . Tolerance is ±0.25mm .010" unless otherwise noted. Protruded resin under flange is 1.0mm .04" max. Lead spacing is measured where the leads emerge from the package. Specifications are subject to change without notice. Part No. LTL42EKEKNN BNS-OD-C131/A4 Page 1 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Absolute Maximum Ratings at Maximum Rating 75 90 30 5 to + to + for 5 Seconds Unit mW mA V Part No. LTL42EKEKNN BNS-OD-C131/A4 Page 2 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Electrical / Optical Characteristics at Parameter Luminous Intensity Viewing Angle Peak Emission Wavelength Dominant Wavelength Spectral Line Half-Width Symbol Min. Typ. Max. Unit Test Condition IF = 20mA mcd Note 1 deg Note 2 Fig.5 Measurement Fig.1 nm Note 4 IF = 20mA µA VR = 5V pF VF = 0 , f = 1MHz NOTE Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve. is the off-axis angle at which the luminous intensity is half the axial luminous intensity. Iv classification code is marked on each packing bag. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. Part No. LTL42EKEKNN BNS-OD-C131/A4

PDF Datasheet Preview

LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only
* High luminous intensity output. * Low power consumption. * High efficiency. * Versatile mounting on P.C. Board or panel. * I.C. Compatible/low current requirement. * Popular T-1 diameter package.

Package Dimensions

LTL42EKEKNN

Lens

Water Clear

Source Color

AlInGaP Red

Notes All dimensions are in millimeters inches . Tolerance is ±0.25mm .010" unless otherwise noted. Protruded resin under flange is 1.0mm .04" max. Lead spacing is measured where the leads emerge from the package. Specifications are subject to change without notice.

Part No. LTL42EKEKNN BNS-OD-C131/A4

Page 1 of 10

LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only

Absolute Maximum Ratings at

Maximum Rating 75 90 30 5 to + to +
for 5 Seconds

Unit mW mA V

Part No. LTL42EKEKNN BNS-OD-C131/A4

Page 2 of 10

LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only

Electrical / Optical Characteristics at

Parameter Luminous Intensity Viewing Angle Peak Emission Wavelength Dominant Wavelength Spectral Line Half-Width

Symbol Min.

Typ.

Max. Unit

Test Condition

IF = 20mA mcd

Note 1
deg Note 2 Fig.5

Measurement

Fig.1
nm Note 4

IF = 20mA
µA VR = 5V
pF VF = 0 , f = 1MHz

NOTE Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve.
is the off-axis angle at which the luminous intensity is half the axial luminous intensity. Iv classification code is marked on each packing bag. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents the single
wavelength which defines the color of the device.

Part No. LTL42EKEKNN BNS-OD-C131/A4

More datasheets: 0314004.H | 0314.250H | 0314010.H | 0314.125H | 0314015.H | DCMM37PN | DAMP-7C2P-J-K87 | 2241.002.12.00 | 2241.002.00 | DBMM13W3PJ

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived LTL42EKEKNN Datasheet file may be downloaded here without warranties.

Datasheet ID: LTL42EKEKNN 646059