LTL2R3SYK

LTL2R3SYK Datasheet

LTL2P3SEK LTL2R3SEK LTL2P3SYK LTL2R3SYK

Part	Datasheet
LTL2R3SYK	LTL2R3SYK (pdf)

Related Parts	Information
LTL2R3SEK	LTL2R3SEK

PDF Datasheet Preview
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only LTL2P3SEK LTL2R3SEK LTL2P3SYK LTL2R3SYK Technical Data Ultra Bright LED Lamp for Traffic Sign Red 22o Red 30o Amber 22o Amber 30o * Lower system cost. * Higher luminous efficiency than incandescent lamp. * Fewer LED are required due to the TS AlInGaP technology. * High luminous intensity output. * Low power consumption. * High efficiency. * Versatile mounting on PCB or panel. * I.C. Compatible / low current requirements. * Popular T-1 4 diameter 5 mm . The source color light emitting diode dice of these devices is made of AlInGaP on a transparent substrate TS . The water clear epoxy lens on these devices create viewing angles of 22 and 30 degrees that match international specifications for traffic sign utilization. These LED lamps provide superior endurance against moisture and high temperatures thus are reliable for outdoor environment use. With a lower power consumption than traditional incandescent lamps, these devices yield lower system cost. * Traffic signals. * Versatile warning signals. * Outdoor traffic display panels. Part No. LTL2P3SEK / LTL2R3SEK / LTL2P3SYK / LTL2R3SYK BNS-OD-C131/A4 Page 1 of 11 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only * High luminous intensity output. * Low power consumption. * High efficiency. * Versatile mounting on PCB or panel. * I.C. Compatible / low current requirements. * Popular T-1 3/4 diameter. Package Dimensions LTL2P3SEK / LTL2R3SEK LTL2P3SYK / LTL2R3SYK Lens Water Clear Water Clear Source Color TS AlInGaP Red TS AlInGaP Amber Notes All dimensions are in millimeters inches . Tolerance is ±0.25mm unless otherwise noted. Protruded resin under flange is 1.0mm max. Lead spacing is measured where the leads emerge from the package. Specifications are subject to change without notice. Part No. LTL2P3SEK / LTL2R3SEK / LTL2P3SYK / LTL2R3SYK BNS-OD-C131/A4 Page 2 of 11 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Absolute Maximum Ratings at TA=25 °C Parameter Power Dissipation Peak Forward Current 1/10 Duty Cycle, 0.1ms Pulse Width DC Forward Current Derating Linear From 50 °C Maximum Rating 130 100 50 5 -40°C to + 80°C -55°C to + 100°C 260°C for 5 Seconds Unit mW mA/℃ V Part No. LTL2P3SEK / LTL2R3SEK / LTL2P3SYK / LTL2R3SYK BNS-OD-C131/A4 Page 3 of 11 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Electrical / Optical Characteristics at TA=25 °C Parameter Luminous Intensity

PDF Datasheet Preview

LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only

LTL2P3SEK LTL2R3SEK LTL2P3SYK LTL2R3SYK

Technical Data

Ultra Bright LED Lamp for Traffic Sign

Red 22o Red 30o Amber 22o Amber 30o
* Lower system cost. * Higher luminous efficiency than incandescent lamp. * Fewer LED are required due to the TS AlInGaP
technology.
* High luminous intensity output. * Low power consumption. * High efficiency. * Versatile mounting on PCB or panel. * I.C. Compatible / low current requirements.
* Popular T-1 4 diameter 5 mm .

The source color light emitting diode dice of these devices is made of AlInGaP on a transparent substrate TS . The water clear epoxy lens on these devices create viewing angles of 22 and 30 degrees that match international specifications for traffic sign utilization. These LED lamps provide superior endurance against moisture and high temperatures thus are reliable for outdoor environment use. With a lower power consumption than traditional incandescent lamps, these devices yield lower system cost.
* Traffic signals. * Versatile warning signals. * Outdoor traffic display panels.

Part No. LTL2P3SEK / LTL2R3SEK / LTL2P3SYK / LTL2R3SYK BNS-OD-C131/A4

Page 1 of 11

LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only
* High luminous intensity output. * Low power consumption. * High efficiency. * Versatile mounting on PCB or panel. * I.C. Compatible / low current requirements. * Popular T-1 3/4 diameter.

Package Dimensions

LTL2P3SEK / LTL2R3SEK LTL2P3SYK / LTL2R3SYK

Lens

Water Clear Water Clear

Source Color

TS AlInGaP Red TS AlInGaP Amber

Notes All dimensions are in millimeters inches . Tolerance is ±0.25mm unless otherwise noted. Protruded resin under flange is 1.0mm max. Lead spacing is measured where the leads emerge from the package. Specifications are subject to change without notice.

Part No. LTL2P3SEK / LTL2R3SEK / LTL2P3SYK / LTL2R3SYK BNS-OD-C131/A4

Page 2 of 11

LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only

Absolute Maximum Ratings at TA=25 °C

Parameter Power Dissipation Peak Forward Current 1/10 Duty Cycle, 0.1ms Pulse Width DC Forward Current

Derating Linear From 50 °C

Maximum Rating 130 100 50 5 -40°C to + 80°C -55°C to + 100°C
260°C for 5 Seconds

Unit mW mA/℃ V

Part No. LTL2P3SEK / LTL2R3SEK / LTL2P3SYK / LTL2R3SYK BNS-OD-C131/A4

Page 3 of 11

LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only

Electrical / Optical Characteristics at TA=25 °C

Parameter

Luminous Intensity

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived LTL2R3SYK Datasheet file may be downloaded here without warranties.

Datasheet ID: LTL2R3SYK 646052