MDEV-DEMO-RC-B

MDEV-DEMO-RC-B Datasheet

MDEV-900-TT

Part	Datasheet
MDEV-DEMO-RC-B	MDEV-DEMO-RC-B (pdf)

Related Parts	Information
EVM-900-TT	EVM-900-TT
MDEV-900-TT	MDEV-900-TT
MDEV-DEMO-RC-A	MDEV-DEMO-RC-A
MDEV-PROTO	MDEV-PROTO
MDEV-PGDOCK	MDEV-PGDOCK
MDEV-900-TT-A	MDEV-900-TT-A
EVAL-900-TT	EVAL-900-TT

PDF Datasheet Preview
TT Series Master Development System User's Guide A large-print version of this document is available at Table of Contents Introduction Ordering Information TT Series Transceiver Carrier Board TT Series Transceiver Carrier Board Objects TT Series Transceiver Carrier Board Pin Assignments Programming Dock Programming Dock Objects Remote Control Demo Board Remote Control Demo Board Objects Prototype Board Prototype Board Objects Initial Setup Using the Programming Dock Using the Remote Control Demo Board Using the Prototype Board The Development Kit Demonstration Software Development Kit Demonstration Software Example Carrier Board Schematic Remote Control Demo Board Schematic Programming Dock Board Schematic Prototype Board Schematic TT Series Master Development System User's Guide Figure 1 TT Series Master Development System Introduction The Linx TT Series Remote Control Transceiver modules offer a simple, efficient and cost-effective method of adding remote control capabilities to any product. The Master Development System provides a designer with all the tools necessary to correctly and legally incorporate the TT Series into an end product. The boards serve several important functions: • Rapid Module Evaluation The boards allow the performance of the Linx TT Series modules to be evaluated quickly in a user’s environment. The development boards can be used to evaluate the range performance of the modules. • Application Development A prototyping board allows the development of custom circuits directly on the board. All signal lines are available on headers for easy access. • Software Development A programming dock with a PC interface allows development and testing of custom software applications for control of the module. • Design Benchmark The boards provide a known benchmark against which the performance of a custom design may be judged. The Master Development System includes 2 Carrier Boards, 2 RC Demo Boards, 2 Programming Dock Boards, 2 Prototype Boards, 4 TT Series transceivers, antennas, batteries and full documentation. One part is soldered to each Carrier Board Ordering Information Ordering Information MDEV-900-TT TT Series Master Development System MDEV-900-TT-A Amplified TT Series Master Development System EVAL-900-TT TT Series Basic Evaluation Kit EVAL-900-TT-A Amplified TT Series Basic Evaluation Kit TRM-900-TT 900MHz TT Series Remote Control Transceiver TRM-900-TT-A 900MHz Amplified TT Series Remote Control and Sensor Transceiver EVM-900-TT 900MHz TT Series Carrier Board EVM-900-TT-A 900MHz Amplified TT Series Evaluation Module MDEV-DEMO-RC-A Development System Remote Control Demo Board, Type A MDEV-DEMO-RC-B Development System Remote Control Demo Board, Type B MDEV-PGDOCK Development System Programming Dock MDEV-PROTO Development System Prototype Board CON-SOC-EVM EVM Module Socket Kit Figure 2 Ordering Information TT Series Transceiver Carrier Board Figure 3 TT Series Transceiver Carrier Board Bottom TT Series Transceiver Carrier Board Objects TT Series Transceiver MMCX RF Connector Dual Row Header Single Row Header TT Series Transceiver Carrier Board Pin Assignments ANTENNA 1 GND 6 RESET 8 PDN 10 NC 12 PAIR 14 NC 16 LVL_ADJ 18 NC 20 NC 22 NC 24 NC 26 NC 28 NC 30 NC 32 NC 34 NC 36 2-5 GND RF Connector 7 MODE_IND 9 CMD_DATA_IN 11 LATCH_EN 13 ACK_EN 15 CMD_DATA_OUT 17 VCC 19 C0 21 C1 23 NC 25 RSSI 27 NC 29 NC 31 NC 33 NC 35 NC 37 NC 38 S0 39 S1 40 S2 41 S3 42 S4 43 S5 44 S6 45 S7 46 ACK_OUT 47 NC 48 NC 49 NC 50 NC 51 NC 52 NC 53 NC 54 NC 55 NC 56 NC Figure 4 TT Series Transceiver Carrier Board Pin Assignments Top View Programming Dock Figure 5 Programming Dock Programming Dock Objects Carrier Board Socket RP-SMA Antenna Connector MODE_IND LED Micro USB Connector LCD Display Remote Control Demo Board Board A Figure 6 Remote Control Demo Board Board B Remote Control Demo Board Objects Carrier Board Socket RP-SMA Antenna Connector Power Switch MODE_IND LED CONFIRM LED PAIR button Status Line Output LEDs Status Line Input Buttons 4 AAA Batteries Not shown, on the back of the boards Prototype Board 12 11 Figure 7 Prototype Board Prototype Board Objects Carrier Board Socket RP-SMA Antenna Connector Micro USB Connector Power Switch Power LED External Battery Connection Prototyping Area 3.3V Supply Bus Ground Bus USB Interface Lines Module Interface Headers Command Data Interface Routing Switches on back Initial Setup There are several boards that are included with the Basic Evaluation Kit and the Master Development System. The Basic Evaluation Kit includes two Carrier Boards and two Remote Control Demo Boards. The Master Development System includes these boards but also adds two Programming Docks and two Prototype Boards. The Carrier Boards have a TT Series transceiver on a daughter board with headers. These boards snap into sockets on the other boards, enabling the modules to be easily moved among the test boards. There are two Remote Control Demo Boards that are populated differently. Board A has the buttons on the right column and board B has them on the left column. These accept the Carrier Boards and are used to demonstrate the remote control functionality of the TT Series. They can also be used for range testing. These boards use hardware configuration, so if any changes have been made to the modules using the software then they may not operate correctly. A restore to default configuration can be used to reset the modules. The Programming Docks have a socket for a Carrier Board and a USB interface for connection to a PC. This is used with the demonstration software included with the kit to configure the module through its Command Data Interface. The Prototype Boards have a socket for a Carrier Board, a USB interface and a large area of plated through holes that can be used to develop custom circuitry. The board can be powered either from the USB connection or an external battery. ! Warning Installing or removing a Carrier Board while power is applied could cause permanent damage to the module. Either turn off power to the board or unplug the USB cable before installing or removing a Carrier Board Using the Programming Dock Snap a Carrier Board onto the socket on the Programming Dock as shown in Figure

PDF Datasheet Preview

TT Series Master Development System

User's Guide

A large-print version of this document is available at

Table of Contents
Introduction Ordering Information TT Series Transceiver Carrier Board TT Series Transceiver Carrier Board Objects TT Series Transceiver Carrier Board Pin Assignments Programming Dock Programming Dock Objects Remote Control Demo Board Remote Control Demo Board Objects Prototype Board Prototype Board Objects Initial Setup Using the Programming Dock Using the Remote Control Demo Board Using the Prototype Board The Development Kit Demonstration Software Development Kit Demonstration Software Example Carrier Board Schematic Remote Control Demo Board Schematic Programming Dock Board Schematic Prototype Board Schematic

TT Series Master Development System

User's Guide

Figure 1 TT Series Master Development System

Introduction

The Linx TT Series Remote Control Transceiver modules offer a simple, efficient and cost-effective method of adding remote control capabilities to any product. The Master Development System provides a designer with all the tools necessary to correctly and legally incorporate the TT Series into an end product. The boards serve several important functions:
• Rapid Module Evaluation The boards allow the performance of the Linx TT Series modules to be evaluated quickly in a user’s environment. The development boards can be used to evaluate the range performance of the modules.
• Application Development A prototyping board allows the development of custom circuits directly on the board. All signal lines are available on headers for easy access.
• Software Development A programming dock with a PC interface allows development and testing of custom software applications for control of the module.
• Design Benchmark The boards provide a known benchmark against which the performance of a custom design may be judged.

The Master Development System includes 2 Carrier Boards, 2 RC Demo Boards, 2 Programming Dock Boards, 2 Prototype Boards, 4 TT Series transceivers*, antennas, batteries and full documentation.
* One part is soldered to each Carrier Board
Ordering Information
Ordering Information

MDEV-900-TT

TT Series Master Development System

MDEV-900-TT-A

Amplified TT Series Master Development System

EVAL-900-TT

TT Series Basic Evaluation Kit

EVAL-900-TT-A

Amplified TT Series Basic Evaluation Kit

TRM-900-TT
900MHz TT Series Remote Control Transceiver

TRM-900-TT-A
900MHz Amplified TT Series Remote Control and Sensor Transceiver

EVM-900-TT
900MHz TT Series Carrier Board

EVM-900-TT-A
900MHz Amplified TT Series Evaluation Module

MDEV-DEMO-RC-A Development System Remote Control Demo Board, Type A

MDEV-DEMO-RC-B Development System Remote Control Demo Board, Type B

MDEV-PGDOCK Development System Programming Dock

MDEV-PROTO

Development System Prototype Board

CON-SOC-EVM

EVM Module Socket Kit
Figure 2 Ordering Information

TT Series Transceiver Carrier Board

Figure 3 TT Series Transceiver Carrier Board

Bottom

TT Series Transceiver Carrier Board Objects

TT Series Transceiver MMCX RF Connector Dual Row Header Single Row Header

TT Series Transceiver Carrier Board Pin Assignments

ANTENNA 1

GND 6 RESET 8

PDN 10 NC 12

PAIR 14 NC 16

LVL_ADJ 18 NC 20 NC 22 NC 24 NC 26 NC 28 NC 30 NC 32 NC 34 NC 36
2-5 GND RF Connector
7 MODE_IND 9 CMD_DATA_IN 11 LATCH_EN 13 ACK_EN 15 CMD_DATA_OUT 17 VCC 19 C0 21 C1 23 NC 25 RSSI 27 NC 29 NC 31 NC 33 NC 35 NC 37 NC
38 S0 39 S1 40 S2 41 S3 42 S4 43 S5 44 S6 45 S7 46 ACK_OUT 47 NC 48 NC 49 NC 50 NC 51 NC 52 NC 53 NC 54 NC 55 NC 56 NC

Figure 4 TT Series Transceiver Carrier Board Pin Assignments Top View

Programming Dock

Figure 5 Programming Dock

Programming Dock Objects

Carrier Board Socket RP-SMA Antenna Connector MODE_IND LED Micro USB Connector LCD Display

Remote Control Demo Board

Board A

Figure 6 Remote Control Demo Board

Board B

Remote Control Demo Board Objects

Carrier Board Socket RP-SMA Antenna Connector Power Switch MODE_IND LED CONFIRM LED PAIR button Status Line Output LEDs Status Line Input Buttons 4 AAA Batteries Not shown, on the back of the boards

Prototype Board
12 11

Figure 7 Prototype Board

Prototype Board Objects

Carrier Board Socket RP-SMA Antenna Connector Micro USB Connector Power Switch Power LED External Battery Connection Prototyping Area 3.3V Supply Bus Ground Bus USB Interface Lines Module Interface Headers Command Data Interface Routing Switches on back

Initial Setup

There are several boards that are included with the Basic Evaluation Kit and the Master Development System. The Basic Evaluation Kit includes two Carrier Boards and two Remote Control Demo Boards. The Master Development System includes these boards but also adds two Programming Docks and two Prototype Boards.

The Carrier Boards have a TT Series transceiver on a daughter board with headers. These boards snap into sockets on the other boards, enabling the modules to be easily moved among the test boards.

There are two Remote Control Demo Boards that are populated differently. Board A has the buttons on the right column and board B has them on the left column. These accept the Carrier Boards and are used to demonstrate the remote control functionality of the TT Series. They can also be used for range testing. These boards use hardware configuration, so if any changes have been made to the modules using the software then they may not operate correctly. A restore to default configuration can be used to reset the modules.

The Programming Docks have a socket for a Carrier Board and a USB interface for connection to a PC. This is used with the demonstration software included with the kit to configure the module through its Command Data Interface.

The Prototype Boards have a socket for a Carrier Board, a USB interface and a large area of plated through holes that can be used to develop custom circuitry. The board can be powered either from the USB connection or an external battery.
! Warning Installing or removing a Carrier Board while power is
applied could cause permanent damage to the module. Either turn off power to the board or unplug the USB cable before installing or removing a Carrier Board

Using the Programming Dock

Snap a Carrier Board onto the socket on the Programming Dock as shown in Figure

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MDEV-DEMO-RC-B Datasheet file may be downloaded here without warranties.

Datasheet ID: MDEV-DEMO-RC-B 645794