CSI-SGFI-100-UFFR-B

CSI-SGFI-100-UFFR-B Datasheet

PART NUMBER CSI-SGFI-100-UFFR CSI-SGFI-200-UFFR CSI-SGFI-300-UFFR CSI-SGFI-100-UFFR-B CSI-SGFI-200-UFFR-B CSI-SGFI-300-UFFR-B

Part	Datasheet
CSI-SGFI-100-UFFR-B	CSI-SGFI-100-UFFR-B (pdf)

Related Parts	Information
CSI-SGFI-300-UFFR	CSI-SGFI-300-UFFR
CSI-SGFI-200-UFFR	CSI-SGFI-200-UFFR
CSI-SGFI-100-UFFR	CSI-SGFI-100-UFFR
CSI-SGFI-200-UFFR-B	CSI-SGFI-200-UFFR-B
CSI-SGFI-300-UFFR-B	CSI-SGFI-300-UFFR-B

PDF Datasheet Preview
ITEM A DESCRIPTION U.FL PLUG SEALED SMA FEM. BULKHEAD MOUNT CONNECTOR CABLE WASHER O-RING G HEAT SHRINK TUBING MATERIAL BRASS BRASS 1.13mm COAXIAL BRASS Si RUBBER POLYOLEFIN FINISH GOLD GOLD GRAY GOLD BLACK 1/4 - 36UNS - 2B THREADS SEE PART NUMBER TABLE NOTES UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE IN INCHES [mm]. DIMENSIONS APPLY AFTER FINISHING. MANUFACTURE TO BE COMPLIANT WITH EU RoHS DIRECTIVE, USE MATERIALS THAT DO NOT CONTAIN REACH SUBSTANCES OF VERY HIGH CONCERN >1000ppm, AND USE DRC CONFLICT-FREE SOURCED MATERIALS. MINIMUM FREQUENCY RANGE DC TO 3GHz. CABLE ASSEMBLY SPECIFICATIONS; - CHARACTERISITIC IMPEDANCE 50Ω ± 3Ω - INSERTION LOSS 100mm - IN GHz TYP. 200mm - IN GHz TYP. 300mm - IN GHz TYP. CONNECTORS TO BE APPLIED IN ACCORDANCE WITH CONNECTOR SUPPLIER RECOMMENDED PROCEDURE. TORQUE SPECIFICATIONS: - BULKHEAD MOUNTING NUT TORQUE 7 TO 10 in-lbs. - RECOMMENDED MATING TORQUE 7 TO 10 in-lbs. 8 CONNECTORS TO BE ORIENTED WITH U.FL CONNECTOR MATING FACE 90° CLOCKWISE FROM BULKHEAD CONNECTOR THREAD FLAT FACE, AS SHOWN. 9 INSTALL O-RING ITEM F , WASHER ITEM E AND NUT ITEM D ONTO CONNECTOR BODY ITEM B . 10 - B PART NUMBERS ONLY SHIP O-RINGS ITEM F , WASHERS ITEM E AND NUTS ITEM D IN SEPARATE BAGS OF 100 PIECES EACH. APPV A INITIAL RELEASE OF LINX INTERNAL DRAWING

PDF Datasheet Preview

ITEM A

DESCRIPTION U.FL PLUG

SEALED SMA FEM. BULKHEAD MOUNT

CONNECTOR

CABLE

WASHER

O-RING

G HEAT SHRINK TUBING

MATERIAL BRASS

BRASS
1.13mm COAXIAL BRASS Si RUBBER POLYOLEFIN

FINISH GOLD

GOLD

GRAY GOLD BLACK
1/4 - 36UNS - 2B THREADS

SEE PART NUMBER TABLE

NOTES UNLESS OTHERWISE SPECIFIED

ALL DIMENSIONS ARE IN INCHES [mm].

DIMENSIONS APPLY AFTER FINISHING.

MANUFACTURE TO BE COMPLIANT WITH EU RoHS DIRECTIVE, USE

MATERIALS THAT DO NOT CONTAIN REACH SUBSTANCES OF VERY

HIGH CONCERN >1000ppm, AND USE DRC CONFLICT-FREE

SOURCED MATERIALS.

MINIMUM FREQUENCY RANGE DC TO 3GHz.

CABLE ASSEMBLY SPECIFICATIONS;
- CHARACTERISITIC IMPEDANCE 50Ω ± 3Ω
- INSERTION LOSS 100mm - IN GHz TYP.
200mm - IN GHz TYP.
300mm - IN GHz TYP.

CONNECTORS TO BE APPLIED IN ACCORDANCE WITH CONNECTOR

SUPPLIER RECOMMENDED PROCEDURE.

TORQUE SPECIFICATIONS:
- BULKHEAD MOUNTING NUT TORQUE 7 TO 10 in-lbs.
- RECOMMENDED MATING TORQUE 7 TO 10 in-lbs.
8 CONNECTORS TO BE ORIENTED WITH U.FL CONNECTOR MATING

FACE 90° CLOCKWISE FROM BULKHEAD CONNECTOR THREAD

FLAT FACE, AS SHOWN.
9 INSTALL O-RING ITEM F , WASHER ITEM E AND NUT ITEM D ONTO CONNECTOR BODY ITEM B .
10 - B PART NUMBERS ONLY SHIP O-RINGS ITEM F , WASHERS ITEM E AND NUTS ITEM D IN SEPARATE BAGS OF 100 PIECES EACH.

APPV

A INITIAL RELEASE OF LINX INTERNAL DRAWING

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CSI-SGFI-100-UFFR-B Datasheet file may be downloaded here without warranties.

Datasheet ID: CSI-SGFI-100-UFFR-B 645773