DK-05D0-0399

DK-05D0-0399 Datasheet


Titan Warm White & Daylight White Developer Kit DK-05D0-0399

Part Datasheet
DK-05D0-0399 DK-05D0-0399 DK-05D0-0399 (pdf)
PDF Datasheet Preview
TitanTM Series

Project Type Voltage Notes:

The Titan Warm White & Daylight White Developer Kit enables users to quickly discover the world of solid state lighting and realize the power of Lamina’s super-bright LED light engines. This kit is intended for the rapid evaluation and prototyping of LED lighting solutions. It comes fully assembled and includes everything needed to jump start your design efforts. As shown in the Developer Kit contents table and photo, this comprehensive kit includes two white light engines, a commercially available LED constant current driver, and prewired DC connections.

TitanTM White Developer Kit

Kit Contents

Figure 1

Overall Case Size - 12” x 9” x 3”

Titan Warm White & Daylight White Developer Kit DK-05D0-0399

Item

Qty.

Notes
1 Driver Sub-Assembly, 1050mA
160-0251

Philhong PSA60W-240
2 Light Source and Heat Sink, 3050K Warm White
160-0248
3 Light Source and Heat Sink, 4700K Daylight White
210-0249
4 Plug Adapter, AC, China/ANZAC
210-0134

Franzus NW-12C
5 Plug Adapter, AC, UK
210-0135

Franzus NW-135C
6 Plug Adapter, AC, Europe
210-0133

Franzus NW-1C

Operating Instructions

Remove the white light engine assembly and driver from the kit case and place them on a suitable work surface near an AC power outlet. Please verify the DC/DC connection cable is correctly attached between the light engine and driver.

CAUTION. Lamina LED light sources are extremely bright! Before applying power, direct the light source away from your eyes or wear suitable protective eye wear. Plug the AC adapter’s power cord into a 100-240 VAC/50-60 Hz power outlet using the adapter plugs if required. The light source will now illuminate.

NOTE Please unplug the AC power before connecting or disconnecting the LED light engine to avoid potential damage to the light engine or the driver.
120 Hancock Lane | Westampton, NJ 08060 | USA | laminalighting.com | T +1 | TF + 1
2008 Lamina Lighting Inc. FM-0176 Rev

Connecting Two Lamina Titan Light Engine Assembies

Figure 2

Attaching To Your Fixture or Assembly

The white light engine assembly can be mounted in several configurations. Ideally, the light engine should be configured horizontally, thereby allowing air to flow through the vertically oriented fins. Alternate assembly positions are also possible. The orientation of the fins and the surrounding environment will determine how efficiently the heat sink can dissipate the thermal energy.

Handling Precaution

Contact with the silicone based encapsulant on the surface of the light engine must be avoided to prevent damage. Do not apply pressure to the silicone based encapsulant or allow it to come into contact with sharp objects. Lamina LED light engines must be handled from the sides.

Further Prototyping Information and Support

Additional information regarding the Titan Series of light engines, optics, heat sinks, accessories, developer kits, compatible drivers, and applications notes can be found by visiting Lamina’s website.
More datasheets: PH-2100K-A6 | PH-2200K-A6 | SL1852P12NF | KSP8099TA | KSP8098CTA | KSP8098TF | KSP8099TF | KSP8098TA | KSP8098CBU | KSP8099BU


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DK-05D0-0399 Datasheet file may be downloaded here without warranties.

Datasheet ID: DK-05D0-0399 645424