PHG.2B.96C.CLMD62Z

PHG.2B.96C.CLMD62Z Datasheet

PHG Fixed sockets

Part	Datasheet
PHG.2B.96C.CLMD62Z	PHG.2B.96C.CLMD62Z (pdf)

Related Parts	Information
FFS.F1.GD1.AAE30	FFS.F1.GD1.AAE30
FFS.F1.JB1.AAE30	FFS.F1.JB1.AAE30
FFS.F1.HB1.AAE30	FFS.F1.HB1.AAE30
FFS.F1.RB1.AAE30	FFS.F1.RB1.AAE30
FGW.3K.565.ZZC	FGW.3K.565.ZZC
FFS.F1.KB1.AAE30	FFS.F1.KB1.AAE30
FFS.F1.RK1.AAE30	FFS.F1.RK1.AAE30
FFS.F1.TB1.AAE30	FFS.F1.TB1.AAE30
FFS.F1.GB1.ACE30	FFS.F1.GB1.ACE30
FFS.F1.FB1.AAE30	FFS.F1.FB1.AAE30
FFS.4A.161.DA	FFS.4A.161.DA
FFS.3S.161.DA	FFS.3S.161.DA
FFS.3K.161.DN	FFS.3K.161.DN
FFS.3K.160.DN	FFS.3K.160.DN
FFS.F1.SB1.AAT30	FFS.F1.SB1.AAT30
FFS.F1.RB1.AAT30	FFS.F1.RB1.AAT30
PSS.F1.HB1.AAE30	PSS.F1.HB1.AAE30
PSS.F1.GD1.AAE30	PSS.F1.GD1.AAE30
PSS.F1.RB1.AAE30	PSS.F1.RB1.AAE30
PSS.F1.JB1.AAE30	PSS.F1.JB1.AAE30
PSS.F1.KB1.AAE30	PSS.F1.KB1.AAE30
EEG.3K.03A.CLZ	EEG.3K.03A.CLZ
PSS.F2.290.NZZ	PSS.F2.290.NZZ
PSS.F1.GB1.AAE30	PSS.F1.GB1.AAE30
PSS.F1.GB1.ACE30	PSS.F1.GB1.ACE30
PSS.F1.SB1.AAT30	PSS.F1.SB1.AAT30
EGG.00.BA4.CCS099	EGG.00.BA4.CCS099
EGG.00.DA4.CCS099	EGG.00.DA4.CCS099
EGG.3K.03C.CLZ	EGG.3K.03C.CLZ
EXG.00.DA4.CCS099	EXG.00.DA4.CCS099
EGG.3K.03A.CLZ	EGG.3K.03A.CLZ
PSS.F1.SA1.AAT30	PSS.F1.SA1.AAT30
FGG.2B.96C.CLAD82	FGG.2B.96C.CLAD82
FGG.2B.96C.CLAM31	FGG.2B.96C.CLAM31
FGG.2B.92E.CLAM21	FGG.2B.92E.CLAM21
FGG.2B.96C.CLCD62Z	FGG.2B.96C.CLCD62Z
FGG.2B.96J.CLAD72	FGG.2B.96J.CLAD72
FGG.2B.92E.CLAD92Z	FGG.2B.92E.CLAD92Z
FGG.2B.92E.CLAD92	FGG.2B.92E.CLAD92
FGG.2B.92C.CLAD72N	FGG.2B.92C.CLAD72N
FGG.2B.92A.CLAD62Z	FGG.2B.92A.CLAD62Z
FGG.2B.96J.CLAD82Z	FGG.2B.96J.CLAD82Z
FGG.2B.96J.ZLA	FGG.2B.96J.ZLA
FGG.2B.92E.ZLA	FGG.2B.92E.ZLA
FGG.2B.92J.CLCD52Z	FGG.2B.92J.CLCD52Z
DPN.99.103.8K	DPN.99.103.8K
PHG.2B.92E.CLLM21	PHG.2B.92E.CLLM21
PHG.2B.96C.CLLD52Z	PHG.2B.96C.CLLD52Z
FGW.3K.896.TNN	FGW.3K.896.TNN
FUW.3K.796.ZZS	FUW.3K.796.ZZS
FFM.3K.131.LC	FFM.3K.131.LC
FFM.3K.131.AZ	FFM.3K.131.AZ
FFS.3K.130.LNV	FFS.3K.130.LNV
FGG.4K.03C.CLZT56Z	FGG.4K.03C.CLZT56Z
FGR.3K.03A.KLZT56Z	FGR.3K.03A.KLZT56Z
FGR.3K.03A.KLZT66Z	FGR.3K.03A.KLZT66Z
EBG.3K.03A.CLZ	EBG.3K.03A.CLZ
EGG.4K.03C.CLZ	EGG.4K.03C.CLZ
PHG.3B.03A.CLZD72	PHG.3B.03A.CLZD72
FGG.5K.03N.CLZT21	FGG.5K.03N.CLZT21
FGG.5K.03N.CLZT13Z	FGG.5K.03N.CLZT13Z
FXG.3K.03A.CLZ	FXG.3K.03A.CLZ
FGG.4K.03C.KLZT66Z	FGG.4K.03C.KLZT66Z
ECG.3B.07A.CLZ	ECG.3B.07A.CLZ
FGG.4B.03C.CLZM82Z	FGG.4B.03C.CLZM82Z
FGG.3K.03C.CLZT56Z	FGG.3K.03C.CLZT56Z
FGG.3K.03A.CLZT90Z	FGG.3K.03A.CLZT90Z
FGG.3K.03A.CLZT71Z	FGG.3K.03A.CLZT71Z
FGG.3K.03A.CLZT66Z	FGG.3K.03A.CLZT66Z
FGG.3K.03A.CLZT56Z	FGG.3K.03A.CLZT56Z
FGG.3B.03A.CLZD72Z	FGG.3B.03A.CLZD72Z
FGG.3B.03A.CLZD72	FGG.3B.03A.CLZD72
FGG.5K.03J.CLZT76Z	FGG.5K.03J.CLZT76Z
FXR.3K.03A.KLZ	FXR.3K.03A.KLZ
PHR.3K.03A.KLZT66Z	PHR.3K.03A.KLZT66Z
PHG.5K.03J.CLZT96Z	PHG.5K.03J.CLZT96Z
PHG.5K.03J.CLZT76Z	PHG.5K.03J.CLZT76Z
PHG.4K.03C.KLZT66Z	PHG.4K.03C.KLZT66Z
PHG.4K.03C.CLZT56Z	PHG.4K.03C.CLZT56Z
PHG.4B.03C.CLZM72Z	PHG.4B.03C.CLZM72Z
PHG.3K.03C.CLZT76Z	PHG.3K.03C.CLZT76Z
PEG.4K.03C.CLZT56Z	PEG.4K.03C.CLZT56Z
PEG.4K.03C.CLZT86Z	PEG.4K.03C.CLZT86Z
FXG.5K.03J.CLZ	FXG.5K.03J.CLZ
PHG.3K.03A.CLZT66Z	PHG.3K.03A.CLZT66Z
PHG.3K.03C.CLZT56Z	PHG.3K.03C.CLZT56Z
FXG.4K.03C.CLZ	FXG.4K.03C.CLZ
FGG.2K.92C.CLAT46Z	FGG.2K.92C.CLAT46Z
FGG.2K.92E.CLAT46Z	FGG.2K.92E.CLAT46Z
FGG.2K.92J.CLAT66Z	FGG.2K.92J.CLAT66Z
FGG.2K.92J.KLAT66Z	FGG.2K.92J.KLAT66Z
FGG.2K.96A.CLAT56Z	FGG.2K.96A.CLAT56Z
PKG.3K.93B.CLLT91Z	PKG.3K.93B.CLLT91Z
ECG.3B.96X.CLL	ECG.3B.96X.CLL
EBG.4K.93L.CLM	EBG.4K.93L.CLM
ECG.2B.96C.CLM	ECG.2B.96C.CLM
FFS.3K.130.LNS	FFS.3K.130.LNS
EGW.3K.444.EL	EGW.3K.444.EL
PHG.0K.BB2.CCSE45G	PHG.0K.BB2.CCSE45G
PHG.2K.96A.CLLT56Z	PHG.2K.96A.CLLT56Z
PHG.4K.99H.CLLT96Z	PHG.4K.99H.CLLT96Z
PHG.2K.92J.KLLT66Z	PHG.2K.92J.KLLT66Z
WST.TU.191.LN	WST.TU.191.LN
FGG.3K.97R.CLAC10Z	FGG.3K.97R.CLAC10Z
FGG.3K.93R.CLAK12Z	FGG.3K.93R.CLAK12Z
FGG.3K.97C.CLCT71Z	FGG.3K.97C.CLCT71Z
FGG.3K.97E.CLAT91Z	FGG.3K.97E.CLAT91Z
FGG.3K.93B.CLAT91Z	FGG.3K.93B.CLAT91Z
FGG.3K.9AT.CLAT66Z	FGG.3K.9AT.CLAT66Z
FGG.3K.9AT.CLAK15Z	FGG.3K.9AT.CLAK15Z
FGG.3K.97R.CLAC11Z	FGG.3K.97R.CLAC11Z
FGG.0B.GB3.CCBE30G	FGG.0B.GB3.CCBE30G
FGG.00.BB4.CCBE30G	FGG.00.BB4.CCBE30G
FGG.00.BB4.CCBT10G	FGG.00.BB4.CCBT10G
FGG.0B.MA3.CABE30G	FGG.0B.MA3.CABE30G
FGG.0B.MB3.CABE30G	FGG.0B.MB3.CABE30G
FGG.0B.RB3.CABE30G	FGG.0B.RB3.CABE30G
FGG.0K.BB2.CCBE45G	FGG.0K.BB2.CCBE45G
PHG.00.BB4.CCSE30G	PHG.00.BB4.CCSE30G
PHG.0B.GB3.CASE30G	PHG.0B.GB3.CASE30G
PKG.0B.GB3.CASE30G	PKG.0B.GB3.CASE30G
PHG.0B.MB3.CASE30G	PHG.0B.MB3.CASE30G
PKG.00.BB4.CCSE30S	PKG.00.BB4.CCSE30S
FGG.0B.GB3.CABE30G	FGG.0B.GB3.CABE30G
DPF.91.033.TA	DPF.91.033.TA
EEG.2B.92A.CLL	EEG.2B.92A.CLL
EEL.3K.93B.CLC	EEL.3K.93B.CLC
EEG.4K.95D.CLM	EEG.4K.95D.CLM
EEG.3K.97C.CLM	EEG.3K.97C.CLM
EEG.2B.92E.CLL	EEG.2B.92E.CLL
EGG.2B.96A.CLL	EGG.2B.96A.CLL
EGG.2B.96C.CLM	EGG.2B.96C.CLM
EGG.2B.96J.CLN	EGG.2B.96J.CLN
EGG.2K.92E.CLL	EGG.2K.92E.CLL
EGG.2K.92J.CLL	EGG.2K.92J.CLL
FGG.3B.97E.CLAD11Z	FGG.3B.97E.CLAD11Z
FXG.4K.99H.CLA	FXG.4K.99H.CLA
FNG.2B.96A.CLAM42	FNG.2B.96A.CLAM42
EGW.3K.666.ZZM	EGW.3K.666.ZZM
FGG.4K.99H.CLAT96Z	FGG.4K.99H.CLAT96Z
FGG.4K.93L.CLAK23	FGG.4K.93L.CLAK23
FGG.4K.95D.CLAT12Z	FGG.4K.95D.CLAT12Z
WST.OU.135.10SZ	WST.OU.135.10SZ
FGG.2K.96A.CLZT46Z	FGG.2K.96A.CLZT46Z
EGG.4K.93L.CLM	EGG.4K.93L.CLM
EGG.3K.97C.CLM	EGG.3K.97C.CLM
EGG.3K.92X.CLL	EGG.3K.92X.CLL
EGG.3B.92X.ZLL	EGG.3B.92X.ZLL
EGG.4K.99H.CLL	EGG.4K.99H.CLL
EGG.4K.95D.CLM	EGG.4K.95D.CLM
EGG.5K.90C.CLY	EGG.5K.90C.CLY
FGL.3K.93B.CLMT91Z	FGL.3K.93B.CLMT91Z
FGL.3K.93B.CLMT76Z	FGL.3K.93B.CLMT76Z
DPD.99.010.5K	DPD.99.010.5K
BRD.3K.170.800EN	BRD.3K.170.800EN

PDF Datasheet Preview
Single, Multi & Hybrid Fibre Optic Connectors Dear Customers, As far as data transmission is concerned, the superior characteristics of fibre optics compared to electrical cables are clearly recognised today. The advantages of fibre optics include a transmission capacity 10 times greater than that of conventional coaxial cables, in only one tenth of the size. The reduced weight and space requirements make handling and line installation much easier. Furthermore, fibre optics is characterized by low signal amplitude loss, no susceptibility to electromagnetic interference, and an absence of interference between neighbouring lines. It also offers greater security due to the difficulty of intercepting optical signals. The growing number of applications is more and more varied, and the annual growth rate of fibre optics is greater than Current applications of fibre optics include telemetry, process control, data transmission, cable and closed circuit television, as well as laser signal transmission in medical applications. However, most systems equipped with fibre optics also require simultaneous electrical energy for control operations and power supply. Current practice involves the use of separate electrical and fibre optic connectors. The new technology developed by LEMO greatly simplifies this practice by combining electrical and fibre optic signals in a single connector. LEMO can now offer you a full range of mixed electrical/fibre optic connectors for singlemode or multimode transmission. This product range is available with metal or plastic outer shells, as well as in a watertight version. The range is completed by the addition of a single channel fibre optic connector series. All LEMO fibre optic connectors use a plug and socket push-pull self-latching connection system, obviating the need for plug to plug adaptors. This is a major advantage of the LEMO technology over its competitors. With the aim of providing the best possible answers to your fibre optic needs, LEMO has established an important research and development facility to provide quick and effective solutions to your design requirements. LEMO ISO 9001 certified has been improving its “quality culture” with the aim of reaching TQM. Offering zero defect products with due regard to the environment and meeting delivery requirements, are LEMO’s two main concerns. Certif ied Quality S ISO 9001 Reg. No. 10472 - 03 ystem LEMO SA General Management No reproduction or use without express permission of editorial or pictorial content, in any manner. LEMO reserve the right at all times to modify and improve specifications without any notification. Printed in Switzerland, April 2002 LEMO SA Pdf updated, October 2011 Table of Contents General Production Programme 3 Main Characteristics and Types Series and LEMO’s Push-Pull Self-Latching Connection System Fibre Optic Connectors Production Programme Introduction General Characteristics...................... Selection of the LEMO Fibre Optic Contacts, Series and Contact Acceptable Cable Diameter Selection of Electrical Contact Part Numbering System 00 Series Interconnections Model Description Part Section Showing Internal Components Technical Characteristics Alignment Key and Polarized Keying Systems Part Number Example Models - Series Fibre Type Housing, Cable Fixing Type, Bend Relief, Tooling, Panel Cut-Outs 0B Interconnections Model Description Part Section Showing Internal Components Technical Characteristics Alignment Key and Polarized Keying Systems Part Number Example Models - Series Fibre Type, Housing Bend Relief, Tooling, Panel Cut-Outs 0K Interconnections Model Description Part Section Showing Internal Components Technical Characteristics Alignment Key and Polarized Keying Systems Part Number Example Models - Series Fibre Type Housing, Bend Relief, Tooling, Panel Cut-Outs 2B to 5B Series Interconnections Model Description Part Section Showing Internal Components Technical Characteristics Alignment Key and Polarized Keying Systems Part Number Example Models - Series Tooling, Panel Cut-Outs 2K to 5K Series Interconnections Model Description Part Section Showing Internal Components Technical Characteristics Alignment Key and Polarized Keying Systems Part Number Example Models - Series Tooling, Panel Cut-Outs Types 2B-5B and 2K-5K series Housing, Electrical Contact 2B-5B and 2K-5K Collets 2B-5B and 2K-5K series Variant 2B-5B and 2K-5K Table of Contents 3K.93C Series Interconnections Model Description Part Section Showing Internal Components Technical Characteristics Alignment Key and Polarized Keying Systems Part Number Example Models - Series Types Fibre Optic Contact, Accessories Tooling Fibre Optic Tooling, Crimping Tools for Electrical Termination Instruction, Panel Cut-Outs F1 Fibre Optic Contact........................ Introduction, Part Section Showing Internal Technical Characteristics, Part Number Model - FO Contact Type, Fibre F2 Fibre Optic Contact........................ Introduction, Part Section Showing Internal Components, Technical Characteristics Part Number Example, Model - FO Contact Type, Fibre Type Cable Fixing Type, Insertion and Extraction of the Fibre Optic Insulators, Crimp Electrical Contacts Connectors are delivered without fibre optic contacts, therefore they must be ordered separately according to the size and type of fibre see pages 77 and In case of hybrid with coax contacts type C, connectors are delivered without the coax contact. See page 58 for ordering. Note 1 The position in the reference is used to specify either the presence of a collet nut for fitting the bend relief, or the anodized colour of the housing in aluminium alloy. For models with collet nut for fitting the bend relief, a should be indicated and a bend relief can be ordered separately as indicated in the section. An order for a connector with bend relief should thus include two part numbers. For the various housings available in colours, the corresponding letter in the part number for the colour is indicated on page ~L ~M ~L ~M ~L ~M Models - Series FGG Straight plug, key G or keys and R and cable collet Reference Model Series 2B 3B 4B 5B Dimensions mm A L M S1 S2 15 50 38 13 12 18 58 43 15 14 25 75 57 21 20 35 103 78 31 30 FGG Straight plug, key G or keys cable collet and nut for fitting a bend relief Reference Dimensions mm Model Series 2B 3B 4B 5B A L M S1 S2 15 13 12 18 15 25 21 20 35 31 30 Note The bend relief must be ordered separately see pages 61 and The overall length dimension is with Desmopan bend relief see pages 91 and FNG Straight plug, key G or keys and R and cable collet with lanyard release Reference Dimensions mm Model Series 2B 3B 4B 5B A B L M N S1 S2 15 49 37 160 13 12 18 58 43 190 15 14 25 75 57 230 21 20 35 103 78 300 31 30 Note Cable material stainless steel with PVC sheath. E max S 1 E max PHG Free socket, key G or keys and R and cable collet Reference Dimensions mm Model Series A L S1 S2 2B 47 13 12 3B 56 15 14 4B 73 21 20 5B 99 31 30 PHG Free socket, key G or keys and cable collet and nut for fitting a bend relief Reference Connectors are delivered without fibre optic contacts, therefore they must be ordered separately according to the size and type of fibre see pages 77 and In case of hybrid with coax contacts type C , connectors are delivered without the coax contact. See page 58 for ordering. Note 1 The position in the reference is used to indicate the presence of a collet nut for fitting the bend relief. For models with the type of cable adapter the should always be indicated and a bend relief can be ordered separately as indicated in the section. An order for a connector with bend relief should thus include two part numbers. L max M max L max P Models - Series FGG Straight plug, key G or keys L and R , cable adapter and nut for fitting a bend relief Reference Dimensions mm Model Series A L M S2 2K 16 101 12 3K 19 109 15 4K 25 131 19 5K 38 160 30 Note The overall length dimension is with Desmopan bend relief see pages 91 and FXG Fixed plug with round flange, four holes fixing, key G or keys L and R Reference Model Series Dimensions mm A B G H L M P S2 38 61 15 47 71 19 65 100 30 Panel cut-out P2 see page 53 Note This model does not include an O-ring behind the flange, it allows the device on which it is fitted to reach only IP50 protection index. It does not have a cable adapter. FMG Fixed plug with round flange, four hole fixing, key G or keys L and R , cable adapter and nut for fitting a bend relief Reference Model Series Dimensions mm A B G1 H1 L M P S2 38 15 47 19 65 30 Panel cut-out P2 see page 53 Note 1 See FXG drawing for front view. This model does not include an O-ring behind the flange, it allows the device on which it is fitted to reach only IP50 protection index. The overall length dimension is with Desmopan bend relief see pages 91 and PHG Free socket, key G or keys L and R , cable adapter and nut for fitting a bend relief L max S2 Reference Dimensions mm Model Series A L S2 19 12 23 15 29 19 42 30 Note The overall length dimension is with Desmopan bend relief see pages 91 and L max E max L max E max q First choice alternative q Special order alternative Note 1 See calculation method, caution and suggested standard on page Note The above mentioned multi fibre and mixed fibre optic + LV connectors are delivered without fibre optic contacts See pages 77 and 79 for ordering . Mixed fibre optic F2 contact + HV + LV Male solder contacts Female solder contacts High Voltage contact Cont Crimp type contact Low Voltage contact Contact Solder/ type crimp cont. Reference Fibre optic F2 No Contact No A mm Crimp Test voltage kV rms 1 Contact-contact Test voltage kV rms 1 Contact-shell Rated current A Contact No A mm Solder Crimp Test voltage kV rms 1 Contact-contact Test voltage kV rms 1 Contact-shell Rated current A 5B 5K Male crimp contacts N Female crimp contacts 93C 2 ● 10 2 ● 3 90C 6 4 ● 15 2 ● 8 956 12 2 ● 18 1 ● 19 ● First choice alternative ● Special order alternative Note 1 See calculation method, caution and suggested standard on page Note The above mentioned mixed fibre optic + HV + LV connectors are delivered without fibre optic contacts See page 79 for ordering . More informations about the 3K.93C series are detailed on page Mixed fibre optic F2 contact + coaxial + LV Male solder contacts Female solder contacts Coaxial contact Low Voltage contact Contact Solder Crimp type contact Reference Fibre optic F2 No Contact No Impedance Ω Type Cable group Contact No A mm Solder Crimp Test voltage kV rms 1 Contact-contact Test voltage kV rms 1 Contact-shell Test voltage kV rms 1 Contact-contact Test voltage kV rms 1 Contact-shell Rated current A 3B 3K Male crimp contacts 4B 4K Female crimp contacts 82E 1 50 C 2 6 ● ● 10 3 82R 1 1 50 C 2 16 ● ● 6 3 05C 2 50 C 2 3 1 88E 2 1 50 C 2 6 ● ● 3 ● First choice alternative ● Special order alternative Note 1 See calculation method, caution and suggested standard on page Note The above mentioned mixed fibre optic + coaxial + LV connectors are delivered without coax contacts See page 58 for ordering . Other configurations are available. All insulators designed for F1 F.O. contacts can accept both F1 F.O. or type C coax contacts. Ref. Material C Brass N Brass K Brass T Stainless steel L Aluminium alloy1 G PEEK2 P PSU3 R PPSU4 Housing Surface treatment Outer shell and collet nut Latch sleeve Note and grounding crown chrome nickel nickel nickel black chrome nickel without treatment stainless steel anodized nickel-plated brass q without treatment nickel-plated brass q without treatment nickel-plated brass q without treatment nickel-plated brass q Note Detailed characteristics of these materials and treatments are presented on page 1 The position of the reference is used to specify the anodized colour. 2 Only available for FGG and ENG models of the B series. 3 Only available for ENY and FGY models of the B series. For the colour, see the position. 4 Only available for ENY and FGY models of the B series. q First choice alternative q Special order alternative Coaxial Contact FFS Male coaxial contact type C Cable group1 FFS.2B.250.ZTCE24 FFS.2B.250.ZTCE30 FFS.2B.250.ZTCE31 Note 1 See page 9 for cable group. PSS Female coaxial contact type C Cable group1 PSS.2B.250.ZTME24 PSS.2B.250.ZTME30 PSS.2B.250.ZTME31 Note 1 See page 9 for cable group. Note Detailed characteristics of these contacts are presented on page Note 1 For ordering collet separately. 2 For ordering an M type collet, a reducer and its reducing cone should also be ordered. 3 These collets cannot be used for connector models with collet nut for fitting a bend relief. All dimensions are in millimeters. Collet nut part number FGG.2B.130.LC FGG.2B.130.LC FGG.2B.130.LC FGG.2B.130.LC FGG.2B.130.LC FGG.2B.130.LC FGG.2B.130.LC FGG.2B.130.LC FGG.2B.132.LC FGG.3B.130.LC FGG.3B.130.LC FGG.3B.130.LC FGG.3B.130.LC FGG.3B.130.LC FGG.3B.130.LC FGG.3B.130.LC FGG.3B.132.LC FGG.4B.130.LC FGG.4B.130.LC FGG.4B.130.LC FGG.4B.130.LC FGG.4B.130.LC FGG.4B.130.LC FGG.4B.130.LC FGG.4B.130.LC FGG.4B.132.LC FGG.5B.130.LC FGG.5B.130.LC FGG.5B.130.LC FGG.5B.130.LC FGG.5B.130.LC FGG.5B.130.LC FGG.5B.130.LC FGG.5B.132.LC Bend relief collet nut and bend relief 2B 3B 4B 5B Reference Type 21 and 31 52 to 92 62 to 10 62 and 72 82 and 92 10 to 15 11 to 15 Collet nut part number FFM.2B.132.LC FFM.2B.130.LC FFM.2B.130.LC FFM.3B.131.LC FFM.3B.130.LC FFM.4B.132.LC FFM.4B.130.LC FFM.4B.130.LC FFM.5B.130.LC T type cable adapter Bend relief to be used 1 GMA.0B.●●●.●● GMA.2B.●●●.●● GMA.2B.●●●.●● GMA.1B.●●●.●● GMA.3B.●●●.●● GMA.2B.●●●.●● GMA.4B.●●●.●● GMA.4B.●●●.●● GMA.4B.●●●.●● Note 1 The bend relief is to be ordered separately see pages 91 and All dimensions are in millimeters. 2K 3K Reference Type T 46 T 51 T 56 T 61 T 66 T 46 T 51 T 56 T 61 T 66 T 71 T 76 T 81 T 86 T 91 T 46 T 51 T 56 T 61 T 66 T 71 T 76 T 81 T 86 T 91 T 96 T 10 T 11 T 12 T 13 Adapter Cable max. min. Adapter with gasket part number FGG.2K.846.TNV FGG.2K.851.TNV FGG.2K.856.TNV FGG.2K.861.TNV FGG.2K.866.TNV FGG.3K.846.TNV FGG.3K.851.TNV FGG.3K.856.TNV FGG.3K.861.TNV FGG.3K.866.TNN FGG.3K.871.TNN FGG.3K.876.TNN FGG.3K.881.TNN FGG.3K.886.TNN FGG.3K.891.TNN FGG.4K.846.TNV FGG.4K.851.TNV FGG.4K.856.TNV FGG.4K.861.TNV FGG.4K.866.TNV FGG.4K.871.TNV FGG.4K.876.TNV FGG.4K.881.TNV FGG.4K.886.TNV FGG.4K.891.TNV FGG.4K.896.TNV FGG.4K.810.TNV FGG.4K.811.TNV FGG.4K.812.TNV FGG.4K.813.TNV Note 1 The bend relief is to be ordered separately see pages 91 and 2 Add a short piece of heat-shrink tubing under the bend relief. Collet nut part number Bend relief to be used 1 Note 1 The last letter on the part number indicates black colour of the bend relief. For ordering a bend relief with another colour see table on page 92 and replace the letter by the letter of the colour required. Collet adapter type for FUW and PUW Reference Type Part number of the anchor with screws Part number of earthing body with o-ring Part number Collet Cable of crimp ring A max. min. Part number of collet with gaskets Part number of extended shell Part number Cable of the collet nut group C 96 FGW.3K.146.ZZA FFS.3K.130.LNV FFS.3K.160.DN FUW.3K.796.ZZS FUW.3K.137.GG FUW.3K.130.GG 2, 4 Note GG = LC for chrome-plated brass version GG = AZ for stainless steel version All dimensions are in millimeters. Insulator for plug Part number EGW.3K.444.EL Contact type Signal Power Female Male Note Insulator should be ordered as replacement item. Insulator for socket Part number FGW.3K.344.EL Contact type Signal Power Male Female Note Insulator should be ordered as replacement item. Crimp contacts Contact Contact function Contact part number Male Female Signal FGG.3B.560.ZZC EGG.3B.660.ZZM Power 1 FGW.3K.565.ZZC EGW.3K.666.ZZM Note 1 Power contacts are special with an oversized crimp barrel. Crimp contacts should be ordered as replacement items. PSS Alignment device for F2 fibre optic contacts PSS.F2.290.NZZ Note Alignment device should be ordered as replacement item. Note The last letter of the part number indicates the grey colour of the bend relief. For ordering a bend relief with another colour, see table on page 92 and replace the letter by the letter of the required colour. See also detailed information for each series B series on page 61 K series on page 1 For use only with connectors from series 2B equipped with cable fixing type M and where a bend relief from series 0B is used. 2 For use only with connectors from series 3B equipped with cable fixing type M and where a bend relief from series 1B is used. 3 For use only with connectors from series 4B equipped with cable fixing type M and where a bend relief from series 2B is used. GMq Bend reliefs Silicone A bend relief has been designed for connectors used in applications at high temperature or requiring vapor sterilization. These bend reliefs are different from previous ones their material, a silicone elastomer, is noted for its retention of flexibility over a wide temperature range. They are avai- lable in nine colours. Use the part numbers shown below to order this accessory separately. Main characteristics q Material Silicone elastomer VMQ q Temperature range in dry atmosphere -60°C to +200°C q Temperature range in water steam +140°C q Inflammability not flammable no UL classification GMA.0B.025.RG GMA.0B.030.RG GMA.0B.035.RG GMA.0B.040.RG GMA.0B.045.RG GMA.1B.040.RG GMA.1B.045.RG GMA.2B.040.RG GMA.2B.045.RG GMA.2B.051.RG GMA.2B.057.RG GMA.2B.063.RG GMA.2B.071.RG GMA.2B.080.RG Dimensions mm Bend relief Cable A L max. min. 27 34 Series 0B 2B 0K 3B 2B 4B 2K 3K 4K 5K Part number of nut for fitting the bend relief FFM.0B.130.LC FFM.2B.132.LC 1 FFM.0E.130.LC FFM.3B.131.LC 2 FFM.2B.130.LC FFM.4B.132.LC 3 FFM.2E.130.LC FFM.3K.133.LC FFM.4K.132.LC FFM.5K.132.LC Note The last letter of the part number indicates the grey colour of the bend relief. For ordering a bend relief with another colour, see table on page 92 and replace the letter by the letter of the required colour. See also detailed information for each series B series on page 61 K series on page 1 For use only with connectors from series 2B equipped with cable fixing type M and where a bend relief from series 0B is used. 2 For use only with connectors from series 3B equipped with cable fixing type M and where a bend relief from series 1B is used. 3 For use only with connectors from series 4B equipped with cable fixing type M and where a bend relief from series 2B is used. Note The selection of pigments, which should remain stable at high temperature, is limited by new regulations. For this reason, some colours will be a shade different from those used for Desmopan bend reliefs. The selected solutions represent the best possible compromise. Ref. Colour A blue B white G grey J yellow M brown Ref. Colour N black R red S orange V green E maxi G Material Polyamide G Maximum operating temperature 90°C E maxi G Material Polyamide G Maximum operating temperature 90°C GRA Insulating washers Sockets or plugs mounted on panels can be fitted with insulating washers. The nine colours available combined with those for the overall protective coverings with bend relief makes colour coding possible. GRA.00.269.GG GRA.0S.269.GG GRA.2S.269.GG GRA.3S.269.GG GRA.4S.269.GG Dimensions mm Series A B E LM S T 00 0B 2B 3B 4B Note Insulating washers for series 5B are available on request. Caution These insulating washers can be used with fixed and straight sockets with across flat dimension S1 equivalent to the S dimension of the washer. Ref. Colour Ref. Colour A blue B white G grey J yellow M brown N black R red S orange V green Note The last letter of the part number indicates the colour grey for the insulating washer. To obtain an insulating washer of another colour, refer to the table above and change the letter of the part number to the corresponding letter of the colour required. For the panel cut-out, please consult chapter cut-out» on pages 18, 26 and GRC Double panel washers Double panel washers have been designed to make the drilling of panel holes easier for mounting fixed and straight sockets. The combination of the nine different colours of the double panel washers and of the overall protective coverings with bend relief makes colour coding possible. Dimensions mm Series B EH L M N R S GRC.0S.260.HG 0B 5 14 Caution These double panel washers can be used with fixed or free sockets with across flat dimension S1 equivalent to the S dimension of the washer. Ref. Colour Ref. Colour A blue B white G grey J yellow M brown N black R red S orange V green

PDF Datasheet Preview

Single, Multi & Hybrid

Fibre Optic Connectors

Dear Customers,

As far as data transmission is concerned, the superior characteristics of fibre optics compared to electrical cables are clearly recognised today.

The advantages of fibre optics include a transmission capacity 10 times greater than that of conventional coaxial cables, in only one tenth of the size. The reduced weight and space requirements make handling and line installation much easier. Furthermore, fibre optics is characterized by low signal amplitude loss, no susceptibility to electromagnetic interference, and an absence of interference between neighbouring lines. It also offers greater security due to the difficulty of intercepting optical signals.

The growing number of applications is more and more varied, and the annual growth rate of fibre optics is greater than Current applications of fibre optics include telemetry, process control, data transmission, cable and closed circuit television, as well as laser signal transmission in medical applications.

However, most systems equipped with fibre optics also require simultaneous electrical energy for control operations and power supply. Current practice involves the use of separate electrical and fibre optic connectors.

The new technology developed by LEMO greatly simplifies this practice by combining electrical and fibre optic signals in a single connector.

LEMO can now offer you a full range of mixed electrical/fibre optic connectors for singlemode or multimode transmission. This product range is available with metal or plastic outer shells, as well as in a watertight version. The range is completed by the addition of a single channel fibre optic connector series. All LEMO fibre optic connectors use a plug and socket push-pull self-latching connection system, obviating the need for plug to plug adaptors. This is a major advantage of the LEMO technology over its competitors.

With the aim of providing the best possible answers to your fibre optic needs, LEMO has established an important research and development facility to provide quick and effective solutions to your design requirements.

LEMO ISO 9001 certified has been improving its “quality culture” with the aim of reaching TQM. Offering zero defect products with due regard to the environment and meeting delivery requirements, are LEMO’s two main concerns.

Certif
ied Quality S

ISO 9001 Reg. No. 10472 - 03
ystem

LEMO SA General Management

No reproduction or use without express permission of editorial or pictorial content, in any manner. LEMO reserve the right at all times to modify and improve specifications without any notification.

Printed in Switzerland, April 2002 LEMO SA Pdf updated, October 2011

Table of Contents

General Production Programme 3 Main Characteristics and Types Series and LEMO’s Push-Pull Self-Latching Connection System Fibre Optic Connectors Production Programme Introduction

General Characteristics...................... Selection of the LEMO Fibre Optic Contacts, Series and Contact

Acceptable Cable Diameter Selection of Electrical Contact Part Numbering System
00 Series Interconnections

Model Description Part Section Showing Internal Components Technical Characteristics Alignment Key and Polarized Keying Systems Part Number Example Models - Series Fibre Type Housing, Cable Fixing Type, Bend Relief, Tooling, Panel Cut-Outs
0B Interconnections

Model Description Part Section Showing Internal Components Technical Characteristics Alignment Key and Polarized Keying Systems Part Number Example Models - Series Fibre Type, Housing Bend Relief, Tooling, Panel Cut-Outs
0K Interconnections

Model Description Part Section Showing Internal Components Technical Characteristics Alignment Key and Polarized Keying Systems Part Number Example Models - Series Fibre Type Housing, Bend Relief, Tooling, Panel Cut-Outs
2B to 5B Series Interconnections

Model Description Part Section Showing Internal Components Technical Characteristics Alignment Key and Polarized Keying Systems Part Number Example Models - Series Tooling, Panel Cut-Outs
2K to 5K Series Interconnections

Model Description Part Section Showing Internal Components Technical Characteristics Alignment Key and Polarized Keying Systems Part Number Example Models - Series Tooling, Panel Cut-Outs

Types 2B-5B and 2K-5K series Housing, Electrical Contact 2B-5B and 2K-5K Collets 2B-5B and 2K-5K series Variant 2B-5B and 2K-5K

Table of Contents
3K.93C Series Interconnections

Model Description Part Section Showing Internal Components Technical Characteristics Alignment Key and Polarized Keying Systems Part Number Example Models - Series Types Fibre Optic Contact, Accessories Tooling Fibre Optic Tooling, Crimping Tools for Electrical Termination Instruction, Panel Cut-Outs

F1 Fibre Optic Contact........................ Introduction, Part Section Showing Internal

Technical Characteristics, Part Number Model - FO Contact Type, Fibre

F2 Fibre Optic Contact........................ Introduction, Part Section Showing Internal Components, Technical Characteristics

Part Number Example, Model - FO Contact Type, Fibre Type Cable Fixing Type, Insertion and Extraction of the Fibre Optic

Insulators, Crimp Electrical Contacts
Connectors are delivered without fibre optic contacts, therefore they must be ordered separately according to the size and type of fibre see pages 77 and In case of hybrid with coax contacts type C, connectors are delivered without the coax contact. See page 58 for ordering.

Note 1 The position in the reference is used to specify either the presence of a collet nut for fitting the bend relief, or the anodized colour of the housing in aluminium alloy. For models with collet nut for fitting the bend relief, a should be indicated and a bend relief can be ordered separately as indicated in the section. An order for a connector with bend relief should thus include two part numbers. For the various housings available in colours, the corresponding letter in the part number for the colour is indicated on page
~L ~M
~L ~M
~L ~M

Models - Series

FGG Straight plug, key G or keys and R and cable collet

Reference

Model

Series
2B 3B 4B 5B

Dimensions mm

A L M S1 S2
15 50 38 13 12 18 58 43 15 14 25 75 57 21 20 35 103 78 31 30

FGG Straight plug, key G or keys cable collet and nut for fitting a bend relief

Reference

Dimensions mm

Model

Series
2B 3B 4B 5B

A L M S1 S2
15 13 12 18 15 25 21 20 35 31 30

Note The bend relief must be ordered separately see pages 61 and The overall length dimension is with Desmopan bend relief see pages 91 and

FNG Straight plug, key G or keys and R and cable collet with lanyard release

Reference

Dimensions mm

Model

Series
2B 3B 4B 5B

A B L M N S1 S2
15 49 37 160 13 12 18 58 43 190 15 14 25 75 57 230 21 20 35 103 78 300 31 30

Note Cable material stainless steel with PVC sheath.

E max

S 1 E max

PHG Free socket, key G or keys and R and cable collet

Reference

Dimensions mm

Model Series A L S1 S2
2B 47 13 12 3B 56 15 14 4B 73 21 20 5B 99 31 30

PHG Free socket, key G or keys and cable collet and nut for fitting a bend relief

Reference
Connectors are delivered without fibre optic contacts, therefore they must be ordered separately according to the size and type of fibre see pages 77 and In case of hybrid with coax contacts type C , connectors are delivered without the coax contact. See page 58 for ordering.

Note 1 The position in the reference is used to indicate the presence of a collet nut for fitting the bend relief. For models with the type of cable adapter the should always be indicated and a bend relief can be ordered separately as indicated in the section. An order for a connector with bend relief should thus include two part numbers.

L max M max

L max P

Models - Series

FGG Straight plug, key G or keys L and R , cable adapter and nut for fitting a bend relief

Reference

Dimensions mm

Model Series A L M S2
2K 16 101 12 3K 19 109 15 4K 25 131 19 5K 38 160 30

Note The overall length dimension is with Desmopan bend relief see pages 91 and

FXG Fixed plug with round flange, four holes fixing, key G or keys L and R

Reference

Model Series

Dimensions mm

A B G H L M P S2
38 61 15 47 71 19 65 100 30

Panel cut-out P2 see page 53

Note This model does not include an O-ring behind the flange, it allows the device on which it is fitted to reach only IP50 protection index. It does not have a cable adapter.

FMG Fixed plug with round flange, four hole fixing, key G or keys L and R , cable adapter and nut for fitting a bend relief

Reference

Model Series

Dimensions mm

A B G1 H1 L M P S2
38 15 47 19 65 30

Panel cut-out P2 see page 53

Note 1 See FXG drawing for front view. This model does not include an O-ring behind the flange, it allows the device on which it is fitted to reach only IP50 protection index. The overall length dimension is with Desmopan bend relief see pages 91 and

PHG Free socket, key G or keys L and R , cable adapter and nut for fitting a bend relief

L max S2

Reference

Dimensions mm

Model Series A L S2
19 12
23 15
29 19
42 30

Note The overall length dimension is with Desmopan bend relief see pages 91 and

L max

E max

L max

E max
q First choice alternative q Special order alternative Note 1 See calculation method, caution and suggested standard on page Note The above mentioned multi fibre and mixed fibre optic + LV connectors are delivered without fibre optic contacts See pages 77 and 79 for ordering .

Mixed fibre optic F2 contact + HV + LV

Male solder contacts

Female solder contacts

High Voltage contact

Cont Crimp type contact

Low Voltage contact

Contact Solder/ type crimp cont.

Reference Fibre optic F2 No Contact No A mm Crimp Test voltage kV rms 1 Contact-contact Test voltage kV rms 1 Contact-shell Rated current A Contact No A mm Solder Crimp Test voltage kV rms 1 Contact-contact Test voltage kV rms 1 Contact-shell Rated current A
5B 5K

Male crimp contacts N

Female crimp contacts 93C 2 ● 10 2 ● 3
90C 6 4 ● 15 2 ● 8
956 12 2 ● 18 1 ● 19
● First choice alternative ● Special order alternative Note 1 See calculation method, caution and suggested standard on page
Note The above mentioned mixed fibre optic + HV + LV connectors are delivered without fibre optic contacts See page 79 for ordering . More informations about the 3K.93C series are detailed on page

Mixed fibre optic F2 contact + coaxial + LV

Male solder contacts

Female solder contacts

Coaxial contact

Low Voltage contact

Contact Solder Crimp type contact

Reference Fibre optic F2 No Contact No Impedance Ω Type Cable group Contact No A mm Solder Crimp Test voltage kV rms 1 Contact-contact Test voltage kV rms 1 Contact-shell Test voltage kV rms 1 Contact-contact Test voltage kV rms 1 Contact-shell Rated current A
3B 3K

Male crimp contacts
4B 4K

Female crimp contacts
82E 1 50 C 2 6 ● ● 10 3
82R 1
1 50 C
2 16 ● ● 6 3
05C 2 50 C 2 3
1 88E 2 1 50 C 2 6 ● ● 3
● First choice alternative ● Special order alternative Note 1 See calculation method, caution and suggested standard on page Note The above mentioned mixed fibre optic + coaxial + LV connectors are delivered without coax contacts See page 58 for ordering . Other configurations are available. All insulators designed for F1 F.O. contacts can accept both F1 F.O. or type C coax contacts.

Ref.

Material

C Brass N Brass K Brass T Stainless steel L Aluminium alloy1 G PEEK2 P PSU3 R PPSU4

Housing

Surface treatment

Outer shell and collet nut

Latch sleeve

Note
and grounding crown
chrome
nickel
nickel
nickel
black chrome
nickel
without treatment
stainless steel
anodized
nickel-plated brass q
without treatment nickel-plated brass q
without treatment nickel-plated brass q
without treatment nickel-plated brass q

Note Detailed characteristics of these materials and treatments are presented on page 1 The position of the reference is used to specify
the anodized colour. 2 Only available for FGG and ENG models of the B series. 3 Only available for ENY and FGY models of the B series.

For the colour, see the position. 4 Only available for ENY and FGY models of the B series.
q First choice alternative q Special order alternative

Coaxial Contact

FFS Male coaxial contact type C

Cable group1

FFS.2B.250.ZTCE24

FFS.2B.250.ZTCE30

FFS.2B.250.ZTCE31

Note 1 See page 9 for cable group.

PSS Female coaxial contact type C

Cable group1

PSS.2B.250.ZTME24

PSS.2B.250.ZTME30

PSS.2B.250.ZTME31

Note 1 See page 9 for cable group.

Note Detailed characteristics of these contacts are presented on page
Note 1 For ordering collet separately. 2 For ordering an M type collet, a reducer and its reducing cone should also be ordered. 3 These collets cannot be used for connector models with collet nut for fitting a bend relief.

All dimensions are in millimeters.

Collet nut part number

FGG.2B.130.LC FGG.2B.130.LC FGG.2B.130.LC FGG.2B.130.LC FGG.2B.130.LC FGG.2B.130.LC FGG.2B.130.LC FGG.2B.130.LC FGG.2B.132.LC

FGG.3B.130.LC FGG.3B.130.LC FGG.3B.130.LC FGG.3B.130.LC FGG.3B.130.LC FGG.3B.130.LC FGG.3B.130.LC FGG.3B.132.LC

FGG.4B.130.LC FGG.4B.130.LC FGG.4B.130.LC FGG.4B.130.LC FGG.4B.130.LC FGG.4B.130.LC FGG.4B.130.LC FGG.4B.130.LC FGG.4B.132.LC

FGG.5B.130.LC FGG.5B.130.LC FGG.5B.130.LC FGG.5B.130.LC FGG.5B.130.LC FGG.5B.130.LC FGG.5B.130.LC FGG.5B.132.LC

Bend relief collet nut and bend relief
2B 3B 4B 5B

Reference

Type
21 and 31
52 to 92
62 to 10
62 and 72
82 and 92
10 to 15
11 to 15

Collet nut part number

FFM.2B.132.LC FFM.2B.130.LC FFM.2B.130.LC FFM.3B.131.LC FFM.3B.130.LC FFM.4B.132.LC FFM.4B.130.LC FFM.4B.130.LC

FFM.5B.130.LC

T type cable adapter

Bend relief to be used 1

GMA.0B.●●●.●● GMA.2B.●●●.●● GMA.2B.●●●.●● GMA.1B.●●●.●● GMA.3B.●●●.●● GMA.2B.●●●.●● GMA.4B.●●●.●● GMA.4B.●●●.●●

GMA.4B.●●●.●●

Note 1 The bend relief is to be ordered separately see pages 91 and

All dimensions are in millimeters.
2K 3K

Reference

Type

T 46 T 51 T 56 T 61 T 66 T 46 T 51 T 56 T 61 T 66 T 71 T 76 T 81 T 86 T 91 T 46 T 51 T 56 T 61 T 66 T 71 T 76 T 81 T 86 T 91 T 96 T 10 T 11 T 12 T 13

Adapter

Cable
max. min.

Adapter with gasket part number

FGG.2K.846.TNV FGG.2K.851.TNV FGG.2K.856.TNV FGG.2K.861.TNV FGG.2K.866.TNV

FGG.3K.846.TNV FGG.3K.851.TNV FGG.3K.856.TNV FGG.3K.861.TNV FGG.3K.866.TNN FGG.3K.871.TNN FGG.3K.876.TNN FGG.3K.881.TNN FGG.3K.886.TNN FGG.3K.891.TNN

FGG.4K.846.TNV FGG.4K.851.TNV FGG.4K.856.TNV FGG.4K.861.TNV FGG.4K.866.TNV FGG.4K.871.TNV FGG.4K.876.TNV FGG.4K.881.TNV FGG.4K.886.TNV FGG.4K.891.TNV FGG.4K.896.TNV FGG.4K.810.TNV FGG.4K.811.TNV FGG.4K.812.TNV FGG.4K.813.TNV

Note 1 The bend relief is to be ordered separately see pages 91 and 2 Add a short piece of heat-shrink tubing under the bend relief.

Collet nut part number

Bend relief to be used 1
Note 1 The last letter on the part number indicates black colour of the bend relief. For ordering a bend relief with another colour see table on page 92 and replace the letter by the letter of the colour required.

Collet adapter type for FUW and PUW

Reference Type

Part number of the anchor with screws

Part number of earthing body
with o-ring

Part number Collet Cable of crimp ring A max. min.

Part number of collet
with gaskets

Part number of extended
shell

Part number Cable of the collet nut group

C 96 FGW.3K.146.ZZA FFS.3K.130.LNV FFS.3K.160.DN FUW.3K.796.ZZS FUW.3K.137.GG FUW.3K.130.GG 2, 4

Note GG = LC for chrome-plated brass version GG = AZ for stainless steel version

All dimensions are in millimeters.

Insulator for plug

Part number EGW.3K.444.EL

Contact type

Signal

Power

Female

Male

Note Insulator should be ordered as replacement item.

Insulator for socket

Part number FGW.3K.344.EL

Contact type

Signal

Power

Male

Female

Note Insulator should be ordered as replacement item.

Crimp contacts

Contact

Contact function

Contact part number

Male

Female

Signal FGG.3B.560.ZZC EGG.3B.660.ZZM Power 1 FGW.3K.565.ZZC EGW.3K.666.ZZM

Note 1 Power contacts are special with an oversized crimp barrel. Crimp contacts should be ordered as replacement items.

PSS Alignment device for F2 fibre optic contacts

PSS.F2.290.NZZ Note Alignment device should be ordered as replacement item.
Note The last letter of the part number indicates the grey colour of the bend relief. For ordering a bend relief with another colour, see table on
page 92 and replace the letter by the letter of the required colour.

See also detailed information for each series B series on page 61 K series on page
1 For use only with connectors from series 2B equipped with cable fixing type M and where a bend relief from series 0B is used. 2 For use only with connectors from series 3B equipped with cable fixing type M and where a bend relief from series 1B is used. 3 For use only with connectors from series 4B equipped with cable fixing type M and where a bend relief from series 2B is used.

GMq Bend reliefs Silicone

A bend relief has been designed for connectors used in applications at high temperature or requiring vapor sterilization.

These bend reliefs are different from previous ones their
material, a silicone elastomer, is noted for its retention of
flexibility over a wide temperature range. They are avai-
lable in nine colours.

Use the part numbers shown below to order this accessory separately.

Main characteristics
q Material Silicone elastomer VMQ q Temperature range in dry atmosphere -60°C to +200°C q Temperature range in water steam +140°C q Inflammability not flammable no UL classification

GMA.0B.025.RG GMA.0B.030.RG GMA.0B.035.RG GMA.0B.040.RG GMA.0B.045.RG GMA.1B.040.RG GMA.1B.045.RG GMA.2B.040.RG GMA.2B.045.RG GMA.2B.051.RG GMA.2B.057.RG GMA.2B.063.RG GMA.2B.071.RG GMA.2B.080.RG

Dimensions mm Bend relief Cable

A L max. min.
27 34

Series
0B 2B 0K
3B 2B 4B 2K 3K 4K 5K

Part number of nut for fitting the bend relief

FFM.0B.130.LC

FFM.2B.132.LC 1

FFM.0E.130.LC

FFM.3B.131.LC 2

FFM.2B.130.LC FFM.4B.132.LC 3 FFM.2E.130.LC FFM.3K.133.LC FFM.4K.132.LC FFM.5K.132.LC
Note The last letter of the part number indicates the grey colour of the bend relief. For ordering a bend relief with another colour, see table on
page 92 and replace the letter by the letter of the required colour.

See also detailed information for each series B series on page 61 K series on page
1 For use only with connectors from series 2B equipped with cable fixing type M and where a bend relief from series 0B is used. 2 For use only with connectors from series 3B equipped with cable fixing type M and where a bend relief from series 1B is used. 3 For use only with connectors from series 4B equipped with cable fixing type M and where a bend relief from series 2B is used.

Note The selection of pigments, which should remain stable at high temperature, is limited by new regulations. For this reason, some colours will be a shade different from those used for Desmopan bend reliefs. The selected solutions represent the best possible compromise.

Ref. Colour

A blue B white G grey J yellow M brown

Ref. Colour

N black R red S orange V green

E maxi

G Material Polyamide G Maximum operating temperature 90°C

E maxi

G Material Polyamide G Maximum operating temperature 90°C

GRA Insulating washers

Sockets or plugs mounted on panels can be fitted with insulating washers. The nine colours available combined with those for the overall protective coverings with bend relief makes colour coding possible.

GRA.00.269.GG GRA.0S.269.GG GRA.2S.269.GG GRA.3S.269.GG GRA.4S.269.GG

Dimensions mm Series

A B E LM S T
00 0B 2B 3B 4B

Note Insulating washers for series 5B are available on request.

Caution These insulating washers can be used with fixed and straight sockets with across flat dimension S1 equivalent to the S dimension of the washer.

Ref.

Colour

Ref.

Colour

A blue B white G grey J yellow M brown

N black R red S orange V green

Note The last letter of the part number indicates the colour grey for the insulating washer. To obtain an insulating washer of another colour, refer to the table above and change the letter of the part number to the corresponding letter of the colour required.

For the panel cut-out, please consult chapter cut-out» on pages 18, 26 and

GRC Double panel washers

Double panel washers have been designed to make the drilling of panel holes easier for mounting fixed and straight sockets. The combination of the nine different colours of the double panel washers and of the overall protective coverings with bend relief makes colour coding possible.

Dimensions mm Series

B EH L M N R S

GRC.0S.260.HG 0B 5 14

Caution These double panel washers can be used with fixed or free sockets with across flat dimension S1 equivalent to the S dimension of the washer.

Ref.

Colour

Ref.

Colour

A blue B white G grey J yellow M brown

N black R red S orange V green

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived PHG.2B.96C.CLMD62Z Datasheet file may be downloaded here without warranties.

Datasheet ID: PHG.2B.96C.CLMD62Z 645568