DCC.91.307.5LA

DCC.91.307.5LA Datasheet

DCC.91.307.5LA Extraction tool for F7 contact

Part	Datasheet
DCC.91.307.5LA	DCC.91.307.5LA (pdf)

Related Parts	Information
FFS.F7.125.LCL23	FFS.F7.125.LCL23
PSS.F7.125.LCL23	PSS.F7.125.LCL23

PDF Datasheet Preview
Electronic & Fibre Optic Connectors MINIATURE F7 CONTACT FOR MULTI & HYBRID FIBRE OPTIC CONNECTORS MINIATURE FIBRE-OPTIC F7 CONTACT FOR MULTIFIBRE OR MIXED OPTICAL/ELECTRICAL OF THE 1K-5K AND 1B-5B SERIES In addition to the existing F2 fibre optic contact shown in our catalogue of Fibre-Optic connectors No 5, the B and K series can now also be fitted with the new miniature F7 contact. The main benefits of using this contact are: Reduced size allowing increased contact density. As an example, a 4-channel fibre optic connector is now possible in series 3K/3B. Use of industry standard mm diameter ferrule and polishing processes. Contact design is based on the well-proven F2. Contacts fit onto buffered fibres or semitight jacket cables up to 2 mm in diameter. This brochure shows only a sample of the available models of connectors. Refer to our catalogue No 5 for more detailed information of the full range of LEMO fibre optic connectors. Refer also to catalogue No 5 for accessories or tools specific to the electrical contacts used in hybrid connectors. Certif ystem ied Quality S ISO 9001 Reg. No. 10472 - 03 5 Fibre Optic Connectors No reproduction or use without express permission of editorial or pictorial content, in any manner. LEMO SA reserve the right at all times to modify and improve specifications without any notification. Printed in Switzerland, November 2003 Pdf updated March 2011 F7 Fibre Optic Contact Introduction The F7 type contact is designed to fit multi fibre connectors or mixed fibre optical/electrical connectors from 1B to 5B, 1K to 5K series. The design is based on the well proven F2 contact. Its main features are as follows Ceramic ferrules diameter mm Simple and fast polishing ensuring the physical contact of the fibre end face After mounting on the cable, the contact is very easily installed in the main connector insulator, the particular shape of the contact body retains it in the insulator Single type of cable assembly, regardless of connector shell used The alignment tube can be easily removed in order to clean the fibre end face. This contact makes it possible to use single fibre cables with single-mode or multi-mode fibres of the following sizes 9/125, 50/125 and Part Section Showing Internal Components Female contact 1 body with holder 2 ferrule with holder 3 spring 4 crimp ferrule 5 alignment tube with support Male contact 1 body with holder 2 ferrule with holder 3 spring 4 crimp ferrule Technical Characteristics Material and Treatment Component Body Ferrule Holder Crimp holder Spring Crimp ferrule Support Alignment tube Material PEEK Ceramic Alloy CuNiZn Brass Stainless steel Cu 99 Alloy CuNiZn Ceramic Surface treatment µm without treatment without treatment without treatment

PDF Datasheet Preview

Electronic & Fibre Optic Connectors

MINIATURE F7 CONTACT FOR MULTI & HYBRID

FIBRE OPTIC CONNECTORS

MINIATURE FIBRE-OPTIC F7 CONTACT FOR MULTIFIBRE OR MIXED OPTICAL/ELECTRICAL OF THE 1K-5K AND 1B-5B SERIES

In addition to the existing F2 fibre optic contact shown in our catalogue of Fibre-Optic connectors No 5, the B and K series can now also be fitted with the new miniature F7 contact. The main benefits of using this contact are:

Reduced size allowing increased contact density. As an example, a 4-channel fibre optic connector is now possible in series 3K/3B.

Use of industry standard mm diameter ferrule and polishing processes.

Contact design is based on the well-proven F2. Contacts fit onto buffered fibres or semitight jacket cables up to 2 mm in diameter.

This brochure shows only a sample of the available models of connectors. Refer to our catalogue No 5 for more detailed information of the full range of LEMO fibre optic connectors. Refer also to catalogue No 5 for accessories or tools specific to the electrical contacts used in hybrid connectors.

Certif
ystem
ied Quality S

ISO 9001

Reg. No. 10472 - 03
5 Fibre Optic

Connectors

No reproduction or use without express permission of editorial or pictorial content, in any manner. LEMO SA reserve the right at all times to modify and improve specifications without any notification.

Printed in Switzerland, November 2003 Pdf updated March 2011

F7 Fibre Optic Contact

Introduction

The F7 type contact is designed to fit multi fibre connectors or mixed fibre optical/electrical connectors from 1B to 5B, 1K to 5K series. The design is based on the well proven F2 contact. Its main features are as follows Ceramic ferrules diameter mm Simple and fast polishing ensuring the physical contact of the fibre end face After mounting on the cable, the contact is very easily installed in the main connector insulator, the particular shape of
the contact body retains it in the insulator Single type of cable assembly, regardless of connector shell used The alignment tube can be easily removed in order to clean the fibre end face. This contact makes it possible to use single fibre cables with single-mode or multi-mode fibres of the following sizes 9/125, 50/125 and

Part Section Showing Internal Components

Female contact
1 body with holder
2 ferrule with holder
3 spring
4 crimp ferrule
5 alignment tube
with support

Male contact
1 body with holder 2 ferrule with holder 3 spring 4 crimp ferrule

Technical Characteristics

Material and Treatment

Component

Body Ferrule Holder Crimp holder Spring Crimp ferrule Support Alignment tube

Material

PEEK Ceramic Alloy CuNiZn Brass Stainless steel Cu 99 Alloy CuNiZn Ceramic

Surface treatment µm
without treatment without treatment
without treatment

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DCC.91.307.5LA Datasheet file may be downloaded here without warranties.

Datasheet ID: DCC.91.307.5LA 645554