XPC250300EK

XPC250300EK Datasheet

XPC240300EK - xPico 240 module Ethernet + Wi-Fi XPC250300EK - xPico 250 module Ethernet + Wi-Fi + Bluetooth

Part	Datasheet
XPC250300EK	XPC250300EK (pdf)

Related Parts	Information
XPC240300EK	XPC240300EK

PDF Datasheet Preview
xPico 200 Series Evaluation Kit User Guide This guide describes how to setup the 200 series evaluation kit and provides the information needed to evaluate the included xPico 240 or xPico 250 embedded gateway modules. The intended audience is the engineers that design the xPico 200 into their products. Evaluation Kit Contents 200 series allows OEMs to go to market faster with their smart connected products. It delivers seamless and secure Ethernet, Wi-Fi and/or connectivity. Featuring advanced enterprise security, complete network and Bluetooth stack offload, essential applications for data connectivity and control, preintegration with the MACH10 platform, the xPico 200 series delivers embedded gateway capability in an industry-leading compact footprint. The evaluation kit is available in two different variants depending on xPico 200 series model that is mounted: XPC240300EK - xPico 240 module Ethernet + Wi-Fi XPC250300EK - xPico 250 module Ethernet + Wi-Fi + Bluetooth Evaluation Kit Contents: • xPico 200 module xPico 240 or xPico 250 model on an edge card • xPico 200 evaluation board with socket for xPico 200 edge card module • 5V DC power supply adapter with international plugs • 2x Antennas with u.fl to R-SMA adapter cable Evaluation Kit Description The xPico 200 evaluation kit provides a test platform for the Lantronix xPico 200 gateway module. The evaluation kit uses either 5V power from a USB device port connector or power supplied 5V barrel connector. The evaluation kit includes all necessary regulators to power the 3.3V xPico 200 module. The evaluation kit has the following features: • One DB9M serial port connector with an RS232 transceiver at rates up to 1 Mbps • One RJ45 10/100 Ethernet port with on board PHY and magnetic module • One mini-type B USB device port connector for 5V input power and device port connection to the xPico 200 module. This port can also be jumpered to act as a Host port for engineering evaluation. Refer to the xPico 200 Series Embedded Wi-Fi Gateway Integration Guide and USB.org for proper USB compliant host port implementation. • LEDs for the xPico Ethernet and system status outputs • Access to all logic level IO signals on the xPico 200 via header pins for measurements and connections to other places The xPico 240/250 Evaluation Board image shows the xPico 200 evaluation kit with an attached xPico 200 module, highlighting all of the connectors and configuration jumpers. The Connectors, Header and Switches table lists each of the connectors and jumper headers along with their function. Further description and pin assignments are included in subsequent sections. xPico 200 Evaluation Board Connectors, Headers and Switches Ref Des. Connector/Header Functions xPico 200 Module Socket 3.3V Power Header Test point to monitor the 3.3V regulator output. Ground Header Test point to connect to evaluation board signal ground. USB Host/Device Select Install Jumper to pins 1 to 2 for USB Device Mode Install Jumper to pins 2 to 3 for USB Host Mode Host mode also requires jumper install on JP5, JP6 to provide power out of J9 Ref Des. Connector/Header Functions SDIO Master/Slave Select Install Jumper pins 1 to 2 for SDIO Master Mode Install Jumper pins 2 to 3 for SDIO Slave Mode USB Host Power Out Jumper Install to provide power out for USB host mode. Do not install for device mode default USB Host Power Out Jumper Install to provide power out for USB host mode. Do not install for device mode default JTAG Pads Install JTAG pogo pin header at J1. Use Tag-Connect TC2050-IDC cable probe and TC2050-ARM2010 adapter for JTAG connections IO pin header Header for connection to module power, serial port, and configurable pin connections.

PDF Datasheet Preview

xPico 200 Series Evaluation Kit User Guide

This guide describes how to setup the 200 series evaluation kit and provides the information needed to evaluate the included xPico 240 or xPico 250 embedded gateway modules. The intended audience is the engineers that design the xPico 200 into their products.

Evaluation Kit Contents
200 series allows OEMs to go to market faster with their smart connected products. It delivers seamless and secure Ethernet, Wi-Fi and/or connectivity. Featuring advanced enterprise security, complete network and Bluetooth stack offload, essential applications for data connectivity and control, preintegration with the MACH10 platform, the xPico 200 series delivers embedded gateway capability in an industry-leading compact footprint.

The evaluation kit is available in two different variants depending on xPico 200 series model that is mounted:

XPC240300EK - xPico 240 module Ethernet + Wi-Fi XPC250300EK - xPico 250 module Ethernet + Wi-Fi + Bluetooth

Evaluation Kit Contents:
• xPico 200 module xPico 240 or xPico 250 model on an edge card
• xPico 200 evaluation board with socket for xPico 200 edge card module
• 5V DC power supply adapter with international plugs
• 2x Antennas with u.fl to R-SMA adapter cable

Evaluation Kit Description

The xPico 200 evaluation kit provides a test platform for the Lantronix xPico 200 gateway module. The evaluation kit uses either 5V power from a USB device port connector or power supplied 5V barrel connector. The evaluation kit includes all necessary regulators to power the 3.3V xPico 200 module.

The evaluation kit has the following features:
• One DB9M serial port connector with an RS232 transceiver at rates up to 1 Mbps
• One RJ45 10/100 Ethernet port with on board PHY and magnetic module
• One mini-type B USB device port connector for 5V input power and device port connection to
the xPico 200 module. This port can also be jumpered to act as a Host port for engineering evaluation. Refer to the xPico 200 Series Embedded Wi-Fi Gateway Integration Guide and USB.org for proper USB compliant host port implementation.
• LEDs for the xPico Ethernet and system status outputs
• Access to all logic level IO signals on the xPico 200 via header pins for measurements and connections to other places

The xPico 240/250 Evaluation Board image shows the xPico 200 evaluation kit with an attached xPico 200 module, highlighting all of the connectors and configuration jumpers. The Connectors, Header and Switches table lists each of the connectors and jumper headers along with their function. Further description and pin assignments are included in subsequent sections.
xPico 200 Evaluation Board

Connectors, Headers and Switches

Ref Des.

Connector/Header Functions
xPico 200 Module Socket
3.3V Power Header Test point to monitor the 3.3V regulator output.

Ground Header Test point to connect to evaluation board signal ground.

USB Host/Device Select

Install Jumper to pins 1 to 2 for USB Device Mode Install Jumper to pins 2 to 3 for USB Host Mode Host mode also requires
jumper install on JP5, JP6 to provide power out of J9

Ref Des.

Connector/Header Functions

SDIO Master/Slave Select

Install Jumper pins 1 to 2 for SDIO Master Mode

Install Jumper pins 2 to 3 for SDIO Slave Mode

USB Host Power Out Jumper

Install to provide power out for USB host mode. Do not install for device mode
default

USB Host Power Out Jumper

Install to provide power out for USB host mode. Do not install for device mode
default

JTAG Pads

Install JTAG pogo pin header at J1. Use Tag-Connect TC2050-IDC cable probe
and TC2050-ARM2010 adapter for JTAG connections

IO pin header

Header for connection to module power, serial port, and configurable pin
connections.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived XPC250300EK Datasheet file may be downloaded here without warranties.

Datasheet ID: XPC250300EK 645455