ZB2430-D-C-S-U

ZB2430-D-C-S-U Datasheet

12/17/07 - Updated Compliancy Information. Added approval for ZB2430-D. Updated Approved Antenna List.

Part	Datasheet
ZB2430-D-C-S-U	ZB2430-D-C-S-U (pdf)

Related Parts	Information
ZB2430-Q-E-X-A	ZB2430-Q-E-X-A
ZB2430-Q-E-X-U	ZB2430-Q-E-X-U
ZB2430-D-C-S-A	ZB2430-D-C-S-A
ZB2430-D-E-S-A	ZB2430-D-E-S-A
ZB2430-D-E-S-U	ZB2430-D-E-S-U
ZB2430-D-R-S-A	ZB2430-D-R-S-A
ZB2430-D-R-S-U	ZB2430-D-R-S-U
ZB2430-Q-C-S-A	ZB2430-Q-C-S-A
ZB2430-Q-C-S-U	ZB2430-Q-C-S-U
ZB2430-Q-C-X-A	ZB2430-Q-C-X-A
ZB2430-Q-C-X-U	ZB2430-Q-C-X-U
ZB2430-Q-R-S-A	ZB2430-Q-R-S-A
ZB2430-Q-E-S-U	ZB2430-Q-E-S-U
ZB2430-Q-R-S-U	ZB2430-Q-R-S-U
ZB2430-Q-R-X-A	ZB2430-Q-R-X-A
ZB2430-Q-R-X-U	ZB2430-Q-R-X-U
ZB2430-Q-E-S-A	ZB2430-Q-E-S-A
ZB2430-D-R-S-U-EVB	ZB2430-D-R-S-U-EVB
ZB2430-Q-C-S-U-EVB	ZB2430-Q-C-S-U-EVB
ZB2430-Q-R-S-A-EVB	ZB2430-Q-R-S-A-EVB
ZB2430-Q-R-S-U-EVB	ZB2430-Q-R-S-U-EVB
ZB2430-Q-E-S-U-EVB	ZB2430-Q-E-S-U-EVB
ZB2430-Q-X-EVB	ZB2430-Q-X-EVB
ZB2430-Q-E-S-A-EVB	ZB2430-Q-E-S-A-EVB
ZB2430-Q-C-S-A-EVB	ZB2430-Q-C-S-A-EVB
ZB2430-D-E-S-U-EVB	ZB2430-D-E-S-U-EVB
ZB2430-D-E-S-A-EVB	ZB2430-D-E-S-A-EVB
ZB2430-D-C-S-U-EVB	ZB2430-D-C-S-U-EVB
ZB2430-D-C-S-A-EVB	ZB2430-D-C-S-A-EVB
ZB2430-D-R-S-A-EVB	ZB2430-D-R-S-A-EVB

PDF Datasheet Preview
VERSION Technical Support Sales: Phone E-mail Web: Phone E-mail Web: Document Information This material is preliminary Information furnished by AeroComm in this specification is believed to be accurate. Devices sold by AeroComm are covered by the warranty and patent indemnification provisions appearing in its Terms of Sale only. AeroComm makes no warranty, express, statutory, and implied or by description, regarding the information set forth herein. AeroComm reserves the right to change specifications at any time and without notice. AeroComm’s products are intended for use in normal commercial and industrial applications. Applications requiring unusual environmental requirements such as military, medical life-support or life-sustaining equipment are specifically not recommended without additional testing for such application. Version Version Version 7/21/06 - Initial Release Version 7/25/06 - Updated Pin definitions, corrected status request command to display 0x00 as firmware version, updated CC 08, CC 21 and EEPROM byte write commands. Corrected PAN ID EEPROM address to address 0x78. Updated Future Enhancements section. 9/15/06 - Changed Reset to active Low. Changed pin 20 to Sleep pin and is active Low. Added second mechanical drawing. 1/18/07 - Corrected Read Temperature command. 7/6/07 - Internal Release. 7/17/07 - Added pinout for pluggable module. 8/24/07 - Added API command set. Added Neighbor, Route, & Radio Table commands. Added Energy scan command. Added NV with soft reset command. Added static network parameters information. Updated Broadcast section. Updated Serial Interface section. Updated Channel Mask section. Added power-down modes. Corrected status request response. Added MAC retries to EEPROM parameter list. Corrected Read Channel Command was CC 02 00 changed to CC 02 12/17/07 - Updated Compliancy Information. Added approval for ZB2430-D. Updated Approved Antenna List. 1/4/08 - Added new EEPROM parameters for firmware version - End Device poll rate, Parent Hold Message, End Device Wake Time, End Device Wake Poll rate, Stop Bit Delay, Modify Wake upon RX, Reload Sleep, NV Restore enable/disable, & RS485 DE/RE. 3/1/08- Updated ZB2430 Features, Updated Current Draw for High Power module, Updated RF Packet Size in RX Data Buffer and CTS, Updated Read Digital Input, Updated Read ADC, Updated Write Digital Output, Removed Discover 16-bit NWK Address command, Added Read Voltage cmd, Added Restore Default cmd, Added End-to-End Retries to EEPROM Parameters Table, Updated CTS On/Off Thresholds, Updated Read Neighbor Table Command Contents ZB2430 TRANSCEIVER MODULE 1 ZB2430 Features 1 Overview 1 SPECIFICATIONS 2 Pin Definitions 4 HARDWARE INTERFACE 6 Pin Definitions 6 Generic I/O 6 RXD and TXD 6 Test/Sleep Int. 6 UP_Reset 6 Command/Data 6 In Range 6 RTS Handshaking* 6 CTS Handshaking 7 Sleep Ind. 7 AD In 7 TERMS & DEFINITIONS 8 THEORY OF OPERATION 11 IEEE & ZigBee Overview 11 Creating a Network 12 Mesh 12 Parent/Child Relationship 13 Network Limitations 14 Maximum Network Depth 14 Maximum Number of Children per Parent 15 ZigBee Addressing 15 16-bit Network Address 15 64-bit MAC address 16 Mesh Routing AODV 16 Coordinator Addressing 18 Broadcast Transmissions 18 SERIAL INTERFACE 20 Interface Modes 20 Transparent Mode 20 API Mode 20 Serial Interface Baud Rate 21 Interface Timeout / RF Packet Size 22 Flow Control 22 RXD Data Buffer and CTS 23 TXD Data Buffer and RTS 23 Networking 24 Power Down Modes 26 Cyclic Sleep 26 Deep Sleep 26 CONFIGURING THE ZB2430 28 AT Commands 29 On-the-Fly Control Commands 29 Command Descriptions 31 EEPROM PARAMETERS 37 API OPERATION 41 API Transmit Packet 41 API Send Data Complete 41 API Receive Packet 42 ZB2430 ADDRESSING 43 ADVANCED NETWORK COMMANDS 45 Read Neighbor Table 45 Read Route Table 47 Perform Scan 49 Read Radio Table 51 ORDERING INFORMATION 54 Product Part Numbers 54 COMPLIANCY INFORMATION 55 Agency Identification Numbers 55 Approved antenna List 55 FCC / IC Requirements for Modular Approval 55 OEM Equipment Labeling Requirements 56 Antenna Requirements 56 Warnings required in OEM Manuals 56 Channel Warning 56 ZB2430 TRANSCEIVER MODULE AeroComm’s ZB2430 module is based on the IEEE wireless communication standard and the robust ZigBee networking protocol and is one of the most powerful ZigBee compliant solutions on the market today. The ZB2430 provides OEMs with industry leading GHz module performance in low power consumption, easy integration, long range, and superior features and functionality. Requiring no additional FCC licensing in the Americas, OEMs can easily make existing systems wireless with little or no RF expertise. ZB2430 FEATURES • Mesh architecture • Energy harvester compatible • Retries and Acknowledgements • Programmable Network Parameters • Multiple generic I/O • 250 kbps RF data stream • Software selectable interface baud rates from 110 bps to kbps • Non-standard baud rates supported • Low cost, low power and small size ideal for high volume, portable and battery powered applications • All modules are qualified for Industrial temperatures -40°C to 80°C • Advanced configuration available using AT commands • Easy to use Configuration & Test Utility software OVERVIEW The ZB2430 is a member of AeroComm's FlexRF OEM transceiver family. The ZB2430 is a cost effective, high performance, Direct Sequence Spread Spectrum DSSS transceiver designed for integration into OEM systems operating under FCC part regulations for the GHz ISM band. To boost data integrity and security, the ZB2430 uses DSSS technology featuring optional Advanced-Encryption Standards AES 1. Fully transparent, these transceivers operate seamlessly in serial cable replacement applications. Communications include both system and configuration data via an asynchronous serial interface for OEM Host communications. All association and RF system data transmission/reception is performed by the transceiver. This document contains information about the hardware and software interface between an AeroComm ZB2430 transceiver and an OEM Host. Information includes the theory of operation, specifications, interface definitions, configuration information and mechanical drawings. Note Unless mentioned specifically by name, the ZB2430 modules will be referred to as "radio" or "transceiver". Individual naming is used to differentiate product specific features. The host PC/Microcontroller/Any device to which the ZB2430 module is connected will be referred to as "OEM Host" or “Host.” 1.Feature not available at the time of this release. SPECIFICATIONS Table 1 ZB2430 Specifications Interface Connector Antenna Serial Interface Data Rate Channels Security Frequency Band Channel Bandwidth Channel Spacing RF Data Rate Raw Max Throughput RF Technology Modulation Output Power EIRP 2dBi gain antenna Supply Voltage Current Draw mA Note Power down modes are not supported on Coordinator & Router devices. Sensitivity 1% PER Range, Line of Site based on 2dBi gain antenna Temperature Operating Temperature Storage Dimensions General SMT or Pluggable Chip antenna p/n Laird MAF95029 or U.FL connector Baud rates from 110 bps to 115,200 bps. Non-standard baud rates are also supported. ZB2430-D 15 Direct Sequence Channels ZB2430-Q 15 Direct Sequence Channels Channelization, Network Identification and optional 128-bit AES encryption1 Transceiver 2400 - MHz 3 MHz 5 MHz 250 kbps 64kbps Direct Sequence Spread Spectrum 0-QPSK ZB2430-D -12 dBm to +5 dBm ZB2430-Q +2 dBm to +20 dBm - 3.5V, ±50mV ripple ZB2430-D ZB2430-Q: 100% TX 25 mA 140 mA 100% RX 27 mA 44 mA Cyclic Sleep uA Deep Sleep uA ZB2430-D:-90 dBm typical ZB2430-Q:-100 dBm typical ORDERING INFORMATION PRODUCT PART NUMBERS COMPLIANCY INFORMATION AGENCY IDENTIFICATION NUMBERS Agency compliancy is a very important requirement for any product development. Aerocomm is in the process of obtaining modular approval for its ZB2430 product family so that the OEM only needs to meet a few requirements to use that approval. The corresponding agency identification numbers and approved antennas are listed below. ZB2430-D ZB2430-100 Table 10 Agency Identification Numbers US/FCC KQL-ZB2430D KQL-ZB2430-100 CANADA/IC 2268C-ZB2430D 2268C-ZB2430 ETSI Approved Pending APPROVED ANTENNA LIST The following antennas are approved for operation with the ZB2430 as identified. The OEM is free to choose another vendor’s antenna of like type and equal or lesser gain as an antenna appearing in the table and still maintain compliance. Table 11 ZB2430 Approved Antenna List ZB2430-D ZB2430-100 Aerocomm Part Number Manufacturer Part Number Manufacturer Type 0600-00039 FR05-S1-N-o-001 S151FC-L- 132 PX-2450S WIC2450-A Fractus Nearson Laird/Centurion Integral Chip Omni Chip Gain dBi FCC / IC REQUIREMENTS FOR MODULAR APPROVAL In general, there are two agency classifications of wireless applications portable and mobile. Portable - Portable is a classification of equipment where the user, in general, will be within 20 cm of the transmitting antenna. Portable equipment is further broken down into two classes within cm of human contact and beyond cm Note Ankles, feet, wrists, and hands are permitted to be within cm of the antenna even if the equipment is designated as being greater than cm . The ZB2430 is not agency approved for portable applications. The OEM is required to have additional testing performed to receive this classification. Contact AeroComm for more details. 56 COMPLIANCY INFORMATION Mobile - Mobile defines equipment where the user will be 20 cm or greater from the transmitting equipment. The antenna must be mounted in such a way that it cannot be moved closer to the user with respect to the equipment, although the equipment may be moved. Note Ankles, feet, wrists, and hands are permitted to be within 20 cm of mobile equipment . OEM EQUIPMENT LABELING REQUIREMENTS WARNING The OEM must ensure that FCC labeling requirements are met. This includes a clearly visible label on the outside of the OEM enclosure specifying the appropriate AeroComm FCC identifier for this product as well as the FCC notice below. The FCC identifiers are listed above. Contains FCC ID KQL-ZB2430-100 / KQL-ZB2430D The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions 1 This device may not cause harmful interference, and 2 This device must accept any interference received, including interference that may cause undesired operation. Label and text information should be in a size of type large enough to be readiily legible, consistent with the dimensions of the equipment and the label. However, the type size for the text is not required to be larger than eight point. ANTENNA REQUIREMENTS WARNING This device has been tested with a U.FL connector with the above listed antennas. When integrated into the OEM’s product, these fixed antennas require professional installation preventing end-users from replacing them with non-approved antennas. Any antenna not listed in the above table must be tested to comply with FCC Section for unique antenna connectors and Section for emissions. Contact AeroComm for assistance. Caution Any changes or modifications not expressly approved by AeroComm could void the user’s authority to operate the equipment. WARNINGS REQUIRED IN OEM MANUALS WARNING This equipment has been approved for mobile applications where the equipment should be used at distances greater than 20 cm from the human body with the exception of hands, feet, wrists, and ankles . Operation at distances of less than 20 cm is strictly prohibited and requires additional SAR testing. CHANNEL WARNING The OEM must prevent the end-user from selecting a channel not approved for use by the FCC.

PDF Datasheet Preview

VERSION

Technical Support Sales:

Phone E-mail Web:

Phone E-mail Web:

Document Information

This material is preliminary Information furnished by AeroComm in this specification is believed to be accurate. Devices sold by AeroComm are covered by the warranty and patent indemnification provisions appearing in its Terms of Sale only. AeroComm makes no warranty, express, statutory, and implied or by description, regarding the information set forth herein. AeroComm reserves the right to change specifications at any time and without notice. AeroComm’s products are intended for use in normal commercial and industrial applications. Applications requiring unusual environmental requirements such as military, medical life-support or life-sustaining equipment are specifically not recommended without additional testing for such application.

Version

Version

Version
7/21/06 - Initial Release Version
7/25/06 - Updated Pin definitions, corrected status request command to display 0x00 as firmware version, updated CC 08, CC 21 and EEPROM byte write commands. Corrected PAN ID EEPROM address to address 0x78. Updated Future Enhancements section.
9/15/06 - Changed Reset to active Low. Changed pin 20 to Sleep pin and is active Low. Added second mechanical drawing.
1/18/07 - Corrected Read Temperature command.
7/6/07 - Internal Release.
7/17/07 - Added pinout for pluggable module.
8/24/07 - Added API command set. Added Neighbor, Route, & Radio Table commands. Added Energy scan command. Added NV with soft reset command. Added static network parameters information. Updated Broadcast section. Updated Serial Interface section. Updated Channel Mask section. Added power-down modes. Corrected status request response. Added MAC retries to EEPROM parameter list.

Corrected Read Channel Command was CC 02 00 changed to CC 02
12/17/07 - Updated Compliancy Information. Added approval for ZB2430-D. Updated Approved Antenna List.
1/4/08 - Added new EEPROM parameters for firmware version - End Device poll rate, Parent Hold Message, End Device Wake Time, End Device Wake Poll rate, Stop Bit Delay, Modify Wake upon RX, Reload Sleep, NV Restore enable/disable, & RS485 DE/RE.
3/1/08- Updated ZB2430 Features, Updated Current Draw for High Power module, Updated RF Packet Size in RX Data Buffer and CTS, Updated Read Digital Input, Updated Read ADC, Updated Write Digital Output, Removed Discover 16-bit NWK Address command, Added Read Voltage cmd, Added Restore Default cmd, Added End-to-End Retries to EEPROM Parameters Table, Updated CTS On/Off Thresholds, Updated Read Neighbor Table Command

Contents

ZB2430 TRANSCEIVER MODULE 1

ZB2430 Features 1 Overview 1

SPECIFICATIONS 2

Pin Definitions 4

HARDWARE INTERFACE 6

Pin Definitions 6 Generic I/O 6 RXD and TXD 6 Test/Sleep Int. 6 UP_Reset 6 Command/Data 6 In Range 6 RTS Handshaking* 6 CTS Handshaking 7 Sleep Ind. 7 AD In 7

TERMS & DEFINITIONS 8

THEORY OF OPERATION 11

IEEE & ZigBee Overview 11 Creating a Network 12

Mesh 12 Parent/Child Relationship 13 Network Limitations 14

Maximum Network Depth 14 Maximum Number of Children per Parent 15 ZigBee Addressing 15 16-bit Network Address 15 64-bit MAC address 16 Mesh Routing AODV 16 Coordinator Addressing 18 Broadcast Transmissions 18

SERIAL INTERFACE 20

Interface Modes 20 Transparent Mode 20 API Mode 20

Serial Interface Baud Rate 21 Interface Timeout / RF Packet Size 22 Flow Control 22

RXD Data Buffer and CTS 23 TXD Data Buffer and RTS 23 Networking 24 Power Down Modes 26 Cyclic Sleep 26 Deep Sleep 26

CONFIGURING THE ZB2430 28 AT Commands 29 On-the-Fly Control Commands 29 Command Descriptions 31

EEPROM PARAMETERS 37

API OPERATION 41 API Transmit Packet 41 API Send Data Complete 41 API Receive Packet 42

ZB2430 ADDRESSING 43

ADVANCED NETWORK COMMANDS 45 Read Neighbor Table 45 Read Route Table 47 Perform Scan 49 Read Radio Table 51
ORDERING INFORMATION 54 Product Part Numbers 54

COMPLIANCY INFORMATION 55 Agency Identification Numbers 55 Approved antenna List 55 FCC / IC Requirements for Modular Approval 55 OEM Equipment Labeling Requirements 56 Antenna Requirements 56 Warnings required in OEM Manuals 56 Channel Warning 56

ZB2430 TRANSCEIVER MODULE

AeroComm’s ZB2430 module is based on the IEEE wireless communication standard and the robust ZigBee networking protocol and is one of the most powerful ZigBee compliant solutions on the market today. The ZB2430 provides OEMs with industry leading GHz module performance in low power consumption, easy integration, long range, and superior features and functionality. Requiring no additional FCC licensing in the Americas, OEMs can easily make existing systems wireless with little or no RF expertise.

ZB2430 FEATURES
• Mesh architecture
• Energy harvester compatible
• Retries and Acknowledgements
• Programmable Network Parameters
• Multiple generic I/O
• 250 kbps RF data stream
• Software selectable interface baud rates from 110 bps to kbps
• Non-standard baud rates supported
• Low cost, low power and small size ideal for high volume, portable and battery powered
applications
• All modules are qualified for Industrial temperatures -40°C to 80°C
• Advanced configuration available using AT commands
• Easy to use Configuration & Test Utility software

OVERVIEW

The ZB2430 is a member of AeroComm's FlexRF OEM transceiver family. The ZB2430 is a cost effective, high performance, Direct Sequence Spread Spectrum DSSS transceiver designed for integration into OEM systems operating under FCC part regulations for the GHz ISM band. To boost data integrity and security, the ZB2430 uses DSSS technology featuring optional Advanced-Encryption Standards AES 1. Fully transparent, these transceivers operate seamlessly in serial cable replacement applications. Communications include both system and configuration data via an asynchronous serial interface for OEM Host communications. All association and RF system data transmission/reception is performed by the transceiver. This document contains information about the hardware and software interface between an AeroComm ZB2430 transceiver and an OEM Host. Information includes the theory of operation, specifications, interface definitions, configuration information and mechanical drawings. Note Unless mentioned specifically by name, the ZB2430 modules will be referred to as "radio" or "transceiver". Individual naming is used to differentiate product specific features. The host PC/Microcontroller/Any device to which the ZB2430 module is connected will be referred to as "OEM Host" or “Host.”
1.Feature not available at the time of this release.

SPECIFICATIONS

Table 1 ZB2430 Specifications

Interface Connector Antenna Serial Interface Data Rate Channels

Security

Frequency Band Channel Bandwidth Channel Spacing RF Data Rate Raw Max Throughput RF Technology Modulation Output Power EIRP 2dBi gain antenna

Supply Voltage Current Draw mA Note Power down modes are not supported on Coordinator & Router devices. Sensitivity 1% PER

Range, Line of Site based on 2dBi gain antenna

Temperature Operating Temperature Storage

Dimensions

General

SMT or Pluggable

Chip antenna p/n Laird MAF95029 or U.FL connector

Baud rates from 110 bps to 115,200 bps. Non-standard baud rates are also supported.

ZB2430-D 15 Direct Sequence Channels ZB2430-Q 15 Direct Sequence Channels

Channelization, Network Identification and optional 128-bit AES encryption1

Transceiver
2400 - MHz
3 MHz
5 MHz
250 kbps
64kbps

Direct Sequence Spread Spectrum
0-QPSK

ZB2430-D -12 dBm to +5 dBm ZB2430-Q +2 dBm to +20 dBm
- 3.5V, ±50mV ripple

ZB2430-D ZB2430-Q:
100% TX 25 mA 140 mA
100% RX 27 mA 44 mA

Cyclic Sleep uA

Deep Sleep uA

ZB2430-D:-90 dBm typical ZB2430-Q:-100 dBm typical
ORDERING INFORMATION

PRODUCT PART NUMBERS

COMPLIANCY INFORMATION

AGENCY IDENTIFICATION NUMBERS

Agency compliancy is a very important requirement for any product development. Aerocomm is in the process of obtaining modular approval for its ZB2430 product family so that the OEM only needs to meet a few requirements to use that approval. The corresponding agency identification numbers and approved antennas are listed below.

ZB2430-D ZB2430-100

Table 10 Agency Identification Numbers

US/FCC

KQL-ZB2430D KQL-ZB2430-100

CANADA/IC
2268C-ZB2430D 2268C-ZB2430

ETSI

Approved Pending

APPROVED ANTENNA LIST

The following antennas are approved for operation with the ZB2430 as identified. The OEM is free to choose another vendor’s antenna of like type and equal or lesser gain as an antenna appearing in the table and still maintain compliance.

Table 11 ZB2430 Approved Antenna List

ZB2430-D ZB2430-100

Aerocomm Part Number

Manufacturer Part Number

Manufacturer

Type
0600-00039

FR05-S1-N-o-001 S151FC-L- 132 PX-2450S WIC2450-A

Fractus Nearson Laird/Centurion

Integral Chip Omni Chip

Gain dBi

FCC / IC REQUIREMENTS FOR MODULAR APPROVAL

In general, there are two agency classifications of wireless applications portable and mobile.

Portable - Portable is a classification of equipment where the user, in general, will be within 20 cm of the transmitting antenna. Portable equipment is further broken down into two classes within cm of human contact and beyond cm Note Ankles, feet, wrists, and hands are permitted to be within cm of the antenna even if the equipment is designated as being greater than cm . The ZB2430 is not agency approved for portable applications. The OEM is required to have additional testing performed to receive this classification. Contact AeroComm for more details.
56 COMPLIANCY INFORMATION

Mobile - Mobile defines equipment where the user will be 20 cm or greater from the transmitting equipment. The antenna must be mounted in such a way that it cannot be moved closer to the user with respect to the equipment, although the equipment may be moved. Note Ankles, feet, wrists, and hands are permitted to be within 20 cm of mobile equipment .

OEM EQUIPMENT LABELING REQUIREMENTS

WARNING The OEM must ensure that FCC labeling requirements are met. This includes a clearly visible label on the outside of the OEM enclosure specifying the appropriate AeroComm FCC identifier for this product as well as the FCC notice below. The FCC identifiers are listed above.

Contains FCC ID KQL-ZB2430-100 / KQL-ZB2430D The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions 1 This device may not cause harmful interference, and 2 This device must accept any interference received, including interference that may cause undesired operation.

Label and text information should be in a size of type large enough to be readiily legible, consistent with the dimensions of the equipment and the label. However, the type size for the text is not required to be larger than eight point.

ANTENNA REQUIREMENTS

WARNING This device has been tested with a U.FL connector with the above listed antennas. When integrated into the OEM’s product, these fixed antennas require professional installation preventing end-users from replacing them with non-approved antennas. Any antenna not listed in the above table must be tested to comply with FCC Section for unique antenna connectors and Section for emissions. Contact AeroComm for assistance. Caution Any changes or modifications not expressly approved by AeroComm could void the user’s authority to operate the equipment.

WARNINGS REQUIRED IN OEM MANUALS

WARNING This equipment has been approved for mobile applications where the equipment should be used at distances greater than 20 cm from the human body with the exception of hands, feet, wrists, and ankles . Operation at distances of less than 20 cm is strictly prohibited and requires additional SAR testing.

CHANNEL WARNING

The OEM must prevent the end-user from selecting a channel not approved for use by the FCC.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ZB2430-D-C-S-U Datasheet file may be downloaded here without warranties.

Datasheet ID: ZB2430-D-C-S-U 645374