PRM211

PRM211 Datasheet

PRM210/211/220/221

Part	Datasheet
PRM211	PRM211 (pdf)

Related Parts	Information
DVK-PRM211	DVK-PRM211
DVK-PRM210	DVK-PRM210
DVK-PRM220	DVK-PRM220
PRM240	PRM240
PRM230	PRM230
PRM220	PRM220
PRM221	PRM221
PRM231	PRM231
PRM210	PRM210
PRM241	PRM241
DVK-PRM221	DVK-PRM221
DVK-PRM230	DVK-PRM230
DVK-PRM240	DVK-PRM240
DVK-PRM241	DVK-PRM241
DVK-PRM231	DVK-PRM231

PDF Datasheet Preview
Innovative Technology for a Connected World global solutions local support TM USA Europe Asia: 915 MHz Wireless Module LT1110 THE FASTEST WAY TO WIRELESS Laird Technologies’ third generation 915 MHz FHSS module sets yet another standard for industrial RF communication. Based on proprietary FlexRF technology, this globally-accepted module will exceed most OEM application and performance requirements. Embedded with Laird Technologies’ robust server-client protocol, the LT1110 permits an unlimited number of clients to synchronize to a single server for low latency communications. The server and all clients in a network can communicate with any radio in range via either addressed or broadcast packets. The configuration and test software allows OEMs to design and test networks to suit their applications. From the OEM integrator’s point of view, the LT1110’s interface API, configuration, etc is 100% compatible with the LT2510 allowing the OEM to choose either 915 MHz or GHz. The enhanced API commands provide packet routing control and network intelligence. With its field-proven proprietary FHSS RF protocol and increased penetration at 915 MHz, the LT1110 rejects RF noise, excels in multipath scenarios, allows for co-located systems, and provides an extremely reliable communication link. The LT1110 achieves RF data rates up to three times faster than our previous generation 915 MHz transceivers. Two output power levels are available, a low power module with 8 dBm conducted output power and a high power with 23 dBm conducted output power. Line of sight communication up to mile and 2 miles respectively, is possible while consuming as little as 32 mA of current in full transmit mode! It also comes with a modular approval allowing higher gain antennae to greatly increase the effective range. At the same time, a range of ultra-low power modes make the LT1110 your best solution for power-restrictive or battery-operated applications. The mini SMT package is well-suited for space-constrained designs and has the same pin-out and mechanical form factor as the GHz LT2510 module. It is available in pick-and-place packaging for volume manufacturing. A pluggable version with two single row headers is offered for ease of integration. • Very robust in the presence of interference • 915 MHz for improved RF penetration • High throughput • Ultra-low power consumption • Long range capability • Miniature SMT form factor • Integrated battery monitor, temperature sensor, GPIOs and ADC • Simple integration MARKETS • Commercial buildings • Field surveillance • Utility management • Recreation • Fleet telemetry Innovative Technology for a Connected World 915 MHz Wireless Module LT1110 FLEXIBLE RF PROTOCOL Embedded into Laird Technologies’ 900MHz and GHz FHSS modules, FlexRF technology supports unrivaled flexibility in industrial wireless applications. OEMs have the ability to control and optimize both the radio module and the network, allowing them to develop a highly reliable system for their specific application. RF PROTOCOL MODES a Communication Unicast one-to-one addressing Broadcast one-to-multiple addressing b Fast sync time Numerous “software hooks” empower, control, and provide flexibility. They allow designers to mold the communication link around applications, as opposed to squeezing the application into a fixed communication technology or standard. Each transceiver is designed to provide OEMs with a feature-rich, high-performance, configurable, secure, compatible, integrated solution, allowing OEMs to build the most optimized network possible. d Random back-off e Dynamic radio data table: Retains data from up to 32 radio modules f Configurable retries g Auto channel Parameter PRM210/211/220/221 PRM230/231/240/241 Interface Frequency RF Data Rate Serial Interface Options Serial Interface Data Rate Variable Conducted Output Power Maximum Radiated Power E.I.R.P Current Consumption Peak Tx UART 902-928 MHz 230 kbps / 500 kbps, depends on profile 230 kbps Logic level matches supply voltage ORDERING INFORMATION PRM210 915MHz RF Module Power Surface Mount with U.FL for external antenna PRM230 915MHz RF Module High Power Surface DVK-PRM220 Development Kit for Low Power Mount with U.FL for external antenna Pluggable with U.FL for external antenna PRM211 915MHz RF Module Low Power Surface Mount with Integrated Antenna PRM231 915MHz RF Module High Power Surface DVK-PRM221 Development Kit for Low Power Mount with Integrated Antenna Pluggable with Integrated Antenna PRM220 915MHz RF Module Low Power Pluggable with U.FL for external antenna PRM221 915MHz RF Module Low Power Pluggable with Integrated Antenna PRM240 915MHz RF Module Pluggable with U.FL for external antenna PRM241 915MHz RF Module High Power Pluggable with Integrated Antenna DVK-PRM230 Development Kit for High Power Surface Mount with U.FL for external antenna DVK-PRM231 Development Kit for High Power Surface Mount with Integrated Antenna DVK-PRM210 Development Kit for Low Power Surface Mount with U.FL for external antenna DVK-PRM240 Development Kit for High Power Pluggable with U.FL for external antenna DVK-PRM211 Development Kit for Low Power Surface Mount with Integrated Antenna DVK-PRM241 Development Kit for High Power Pluggable with Integrated Antenna The details contained within the document are subject to change. Download the product specification from for the most current specification. LWS-DS-LT1110 0911 Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird Technologies materials rests with the end user. Laird Technologies makes no warranties as to the fitness, merchantability, suitability or non-infringement of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. Copyright 2011 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trade marks or registered trade marks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights.

PDF Datasheet Preview

Innovative Technology for a Connected World
global solutions local support TM USA Europe Asia:
915 MHz Wireless Module

LT1110

THE FASTEST WAY TO WIRELESS

Laird Technologies’ third generation 915 MHz FHSS module sets yet another standard for industrial RF communication. Based on proprietary FlexRF technology, this globally-accepted module will exceed most OEM application and performance requirements.

Embedded with Laird Technologies’ robust server-client protocol, the LT1110 permits an unlimited number of clients to synchronize to a single server for low latency communications. The server and all clients in a network can communicate with any radio in range via either addressed or broadcast packets. The configuration and test software allows OEMs to design and test networks to suit their applications.

From the OEM integrator’s point of view, the LT1110’s interface API, configuration, etc is 100% compatible with the LT2510 allowing the OEM to choose either 915 MHz or GHz. The enhanced API commands provide packet routing control and network intelligence. With its field-proven proprietary FHSS RF protocol and increased penetration at 915 MHz, the LT1110 rejects RF noise, excels in multipath scenarios, allows for co-located systems, and provides an extremely reliable communication link.

The LT1110 achieves RF data rates up to three times faster than our previous generation 915 MHz transceivers. Two output power levels are available, a low power module with 8 dBm conducted output power and a high power with 23 dBm conducted output power. Line of sight communication up to mile and 2 miles respectively, is possible while consuming as little as 32 mA of current in full transmit mode! It also comes with a modular approval allowing higher gain antennae to greatly increase the effective range. At the same time, a range of ultra-low power modes make the LT1110 your best solution for power-restrictive or battery-operated applications.

The mini SMT package is well-suited for space-constrained designs and has the same pin-out and mechanical form factor as the GHz LT2510 module. It is available in pick-and-place packaging for volume manufacturing. A pluggable version with two single row headers is offered for ease of integration.
• Very robust in the presence of interference
• 915 MHz for improved RF penetration
• High throughput
• Ultra-low power consumption
• Long range capability
• Miniature SMT form factor
• Integrated battery monitor,
temperature sensor, GPIOs and ADC
• Simple integration

MARKETS
• Commercial buildings
• Field surveillance
• Utility management
• Recreation
• Fleet telemetry

Innovative Technology for a Connected World
915 MHz Wireless Module

LT1110

FLEXIBLE RF PROTOCOL

Embedded into Laird Technologies’ 900MHz and GHz FHSS modules, FlexRF technology supports unrivaled flexibility in industrial wireless applications. OEMs have the ability to control and optimize both the radio module and the network, allowing them to develop a highly reliable system for their specific application.

RF PROTOCOL MODES
a Communication Unicast one-to-one addressing Broadcast one-to-multiple addressing
b Fast sync time

Numerous “software hooks” empower, control, and provide flexibility. They allow designers to mold the communication link around applications, as opposed to squeezing the application into a fixed communication technology or standard. Each transceiver is designed to provide OEMs with a feature-rich, high-performance, configurable, secure, compatible, integrated solution, allowing OEMs to build the most optimized network possible.
d Random back-off e Dynamic radio data table:

Retains data from up to 32 radio modules f Configurable retries g Auto channel

Parameter

PRM210/211/220/221

PRM230/231/240/241

Interface

Frequency

RF Data Rate

Serial Interface Options

Serial Interface Data Rate Variable Conducted Output Power Maximum Radiated Power E.I.R.P Current Consumption

Peak Tx

UART
902-928 MHz
230 kbps / 500 kbps, depends on profile
230 kbps

Logic level matches supply voltage
ORDERING INFORMATION

PRM210 915MHz RF Module Power Surface Mount with U.FL for external antenna

PRM230 915MHz RF Module High Power Surface DVK-PRM220 Development Kit for Low Power

Mount with U.FL for external antenna

Pluggable with U.FL for external antenna

PRM211 915MHz RF Module Low Power Surface Mount with Integrated Antenna

PRM231 915MHz RF Module High Power Surface DVK-PRM221 Development Kit for Low Power

Mount with Integrated Antenna

Pluggable with Integrated Antenna

PRM220 915MHz RF Module Low Power Pluggable with U.FL for external antenna

PRM221 915MHz RF Module Low Power Pluggable with Integrated Antenna

PRM240 915MHz RF Module Pluggable with U.FL for external antenna

PRM241 915MHz RF Module High Power Pluggable with Integrated Antenna

DVK-PRM230 Development Kit for High Power Surface Mount with U.FL for external antenna

DVK-PRM231 Development Kit for High Power Surface Mount with Integrated Antenna

DVK-PRM210 Development Kit for Low Power Surface Mount with U.FL for external antenna

DVK-PRM240 Development Kit for High Power Pluggable with U.FL for external antenna

DVK-PRM211 Development Kit for Low Power Surface Mount with Integrated Antenna

DVK-PRM241 Development Kit for High Power Pluggable with Integrated Antenna

The details contained within the document are subject to change. Download the product specification from for the most current specification.

LWS-DS-LT1110 0911

Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird Technologies materials rests with the end user. Laird Technologies makes no warranties as to the fitness, merchantability, suitability or non-infringement of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. Copyright 2011 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trade marks or registered trade marks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights.

More datasheets: MAX3673ETN+ | MAX3673ETN+T | DVK-PRM211 | DVK-PRM210 | DVK-PRM220 | PRM240 | PRM230 | PRM220 | PRM221 | PRM231

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived PRM211 Datasheet file may be downloaded here without warranties.

Datasheet ID: PRM211 645241