CNMNM

CNMNM Datasheet

CNMNM

Part	Datasheet
CNMNM	CNMNM (pdf)

PDF Datasheet Preview
SPECIFICATIONS: Impedance 50 OHMS Frequency Range 0-10 GHz VSWR 0 - 7 GHz, MAX. Working Voltage 1000 V rms Max Insulation Resistance 5k M Ohms min. ALL DIMENSIONS ARE FOR REFERENCE ONLY NO. DESCRIPTION MATERIAL BODY BRASS INSULATION TEFLON CHASSIC BRASS SHELL BRASS RATAINING RING BRASS GASKET SI-RUBBER Q' TY 1 2 FINISH NICKEL GOLD NONE NICKEL ORANGE ZONE INITIAL DRAWING RELEASE 8/21/2012 DRAWN BY PFR ECR NUMBER N/A THE COMPONENTS S , INCLUDING ANY PLATING, FINISHES, COATINGS, CHEMICALS AND SURFACES TREATMENTS, SUPPLIED IN THIS DOCUMENT/DRAWING MUST CONFORM AND COMPLY WITH THE LATEST ISSUE OF LAIRD TECHNOLOGIES SPECIFICATION LT-GES-001, WHICH FULLY INCLUDES BUT IS NOT LIMITED TO ALL CONTENTS OF EU DIRECTIVES 2002/96/EC RoHS DIRECTIVE , AS WELL AS INCLUDES REQUIREMENTS OF THE JOINT INDUSTRY GUIDE STANDARD JIG-101, APRIL THE COMPONENT S IN THIS DOCUMENT/DRAWING MAY BE SUBJECT TO A FULL COMPOUND ANALYSIS FOR PROOF OF COMPLIANCE. THE LATEST ISSUE OF LAIRD TECHNOLOGIES SPECIFICATION LT-GES-001, GENERAL SPECIFICATION FOR THE ENVIRONMENT IS READILY AVAILABLE UPON REQUEST FROM THE SUPPLIER. MATERIAL: SEE NOTES FINISH: SEE NOTES APPROVALS UNLESS OTHERWISE NOTED, THIS DOCUMENT CONTAINS LAIRD TECHNOLOGIES CONFIDENTIAL INFORMATION. REPRODUCTION, USE, DISCLOSURE OR TRANSMITTAL OF ALL OR ANY PART OF THIS DOCUMENT IS PROHIBITED EXCEPT TO THE EXTENT APPROVED IN WRITING BY AN AUTHORIZED REPRESENTATIVE OF LAIRD TECHNOLOGIES. Prod: LAIRD TECHNOLOGIES RESERVES ALL RIGHTS UNDER PATENTS, TRADEMARKS, COPY RIGHTS AND TRADE SECRETS. COPYRIGHT, LAIRD TECHNOLOGIES 2008, ALL RIGHTS RESERVED. 1751 WILKENING COURT THIRD ANGLE PROJECTION

PDF Datasheet Preview

SPECIFICATIONS:

Impedance 50 OHMS

Frequency Range 0-10 GHz

VSWR 0 - 7 GHz, MAX.

Working Voltage 1000 V rms Max

Insulation Resistance 5k M Ohms min.

ALL DIMENSIONS ARE FOR REFERENCE ONLY

NO. DESCRIPTION

MATERIAL

BODY

BRASS

INSULATION

TEFLON

CHASSIC

BRASS

SHELL

BRASS

RATAINING RING

BRASS

GASKET

SI-RUBBER

Q' TY 1 2

FINISH NICKEL GOLD NONE NICKEL ORANGE

ZONE

INITIAL DRAWING RELEASE
8/21/2012

DRAWN BY PFR

ECR NUMBER N/A

THE COMPONENTS S , INCLUDING ANY PLATING, FINISHES, COATINGS, CHEMICALS AND SURFACES TREATMENTS, SUPPLIED IN THIS DOCUMENT/DRAWING MUST CONFORM AND COMPLY WITH THE LATEST ISSUE OF LAIRD TECHNOLOGIES SPECIFICATION LT-GES-001, WHICH FULLY INCLUDES BUT IS NOT LIMITED TO ALL CONTENTS OF EU DIRECTIVES 2002/96/EC RoHS DIRECTIVE , AS WELL AS INCLUDES REQUIREMENTS OF THE JOINT INDUSTRY GUIDE STANDARD JIG-101, APRIL THE COMPONENT S IN THIS DOCUMENT/DRAWING MAY BE SUBJECT TO A FULL COMPOUND ANALYSIS FOR PROOF OF COMPLIANCE. THE LATEST ISSUE OF LAIRD TECHNOLOGIES SPECIFICATION LT-GES-001, GENERAL SPECIFICATION FOR THE ENVIRONMENT IS READILY AVAILABLE UPON REQUEST FROM THE SUPPLIER.

MATERIAL:

SEE NOTES

FINISH:

SEE NOTES

APPROVALS

UNLESS OTHERWISE NOTED, THIS DOCUMENT CONTAINS LAIRD TECHNOLOGIES CONFIDENTIAL INFORMATION.

REPRODUCTION, USE, DISCLOSURE OR TRANSMITTAL OF ALL OR ANY PART OF THIS DOCUMENT IS PROHIBITED EXCEPT TO THE EXTENT APPROVED IN WRITING BY AN AUTHORIZED REPRESENTATIVE OF LAIRD TECHNOLOGIES.

Prod:

LAIRD TECHNOLOGIES RESERVES ALL RIGHTS UNDER PATENTS, TRADEMARKS, COPY RIGHTS AND TRADE SECRETS.

COPYRIGHT, LAIRD TECHNOLOGIES 2008, ALL RIGHTS RESERVED.
1751 WILKENING COURT

THIRD ANGLE PROJECTION

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CNMNM Datasheet file may be downloaded here without warranties.

Datasheet ID: CNMNM 645147