67BCG2003201508R00

67BCG2003201508R00 Datasheet

67BCG2003201508R00

Part	Datasheet
67BCG2003201508R00	67BCG2003201508R00 (pdf)

PDF Datasheet Preview
PICKUP CENTER APPROVED A INITIAL DRAWING RELEASE 2013-09-18 JIM KLINE GL CHANG TO PICKUP CENTER ASSUMED SOLDER PAD THICKNESS RECOMMENDED PCB LAYOUT SCALE 5:1 CLEARANCE MIN. SOLDER CLEARANCE ZONE MIN. SOLDER SECTION A-A CLEARANCE ZONE MIN. PACKAGING NOTES: 10 SPROCKET HOLE PITCH CUMULATIVE TOLERANCE CARRIER CAMBER IS WITHIN 1 MM IN 250 MM. MATERIAL TRANSPARENT POLYSTYRENE ALLOY ALL DIMENSIONS MEET EIA-481-B REQUIREMENTS. PACKING LENGTH PER 22 INCH REEL METERS COMPONENT LOAD PER 13 INCH REEL 4000 PIECES * CAD MAINTAINED DRAWING * MANUAL CHANGES UNAUTHORIZED. PRINTED COPIES OF THIS DOCUMENT ARE CONSIDERED UNCONTROLLED THIS DRAWING IS GENERATED FROM A 3D SOLID MODEL AND MUST BE ACCOMPANIED BY THE MODEL FOR COMPLETE DOCUMENTATION BLOCK TOLERANCES APPLY TO METRIC UNITS ONLY. DUAL DIMENSIONS IF SHOWN ARE FOR REFERENCE ONLY AND ARE DISPLAYED IN 3 PLACES FOR CONVERSION PURPOSES ONLY. DOCUMENT STATE SOLDERED AS SHOWN UNCOMPRESSED COMPRESSED 10% COMPRESSED 20% COMPRESSED 30% HEIGHT mm FORCE grams 0 51 99 145 RESISTANCE m 9 7 6 PEAK STRESS MPa 0 360 712 1063 ESTIMATED CYCLE LIFE INFINITE ~500K ~50K GENERAL NOTES: BURRS SHALL NOT EXCEED 10% OF MATERIAL THICKNESS OR 0.15mm WHICHEVER IS LESS.

PDF Datasheet Preview

PICKUP CENTER

APPROVED

A INITIAL DRAWING RELEASE
2013-09-18

JIM KLINE

GL CHANG

TO PICKUP CENTER

ASSUMED SOLDER PAD THICKNESS

RECOMMENDED PCB LAYOUT

SCALE 5:1

CLEARANCE

MIN.

SOLDER CLEARANCE

ZONE MIN.

SOLDER

SECTION A-A

CLEARANCE ZONE MIN.

PACKAGING NOTES:
10 SPROCKET HOLE PITCH CUMULATIVE TOLERANCE

CARRIER CAMBER IS WITHIN 1 MM IN 250 MM.

MATERIAL TRANSPARENT POLYSTYRENE ALLOY

ALL DIMENSIONS MEET EIA-481-B REQUIREMENTS.

PACKING LENGTH PER 22 INCH REEL METERS

COMPONENT LOAD PER 13 INCH REEL 4000 PIECES
* CAD MAINTAINED DRAWING * MANUAL CHANGES UNAUTHORIZED. PRINTED COPIES OF THIS DOCUMENT ARE CONSIDERED UNCONTROLLED

THIS DRAWING IS GENERATED FROM A 3D SOLID MODEL AND MUST BE ACCOMPANIED BY THE

MODEL FOR COMPLETE DOCUMENTATION

BLOCK TOLERANCES APPLY TO METRIC UNITS ONLY. DUAL DIMENSIONS IF SHOWN ARE FOR REFERENCE ONLY AND ARE DISPLAYED IN 3 PLACES FOR CONVERSION PURPOSES ONLY.

DOCUMENT

STATE SOLDERED AS SHOWN UNCOMPRESSED COMPRESSED 10% COMPRESSED 20% COMPRESSED 30%

HEIGHT mm

FORCE grams
0 51 99 145

RESISTANCE m 9 7 6

PEAK STRESS MPa 0
360 712 1063

ESTIMATED CYCLE LIFE

INFINITE ~500K
~50K

GENERAL NOTES:

BURRS SHALL NOT EXCEED 10% OF MATERIAL THICKNESS OR 0.15mm WHICHEVER IS LESS.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 67BCG2003201508R00 Datasheet file may be downloaded here without warranties.

Datasheet ID: 67BCG2003201508R00 645059