SP0102NC3-2

SP0102NC3-2 Datasheet


Product Specification SP0102 Series Generation II

Part Datasheet
SP0102NC3-2 SP0102NC3-2 SP0102NC3-2 (pdf)
PDF Datasheet Preview
Product Specification SP0102 Series Generation II

This document applies the following SiSonic Model Numbers:

SP0102NC3-2

SP0102NC3-3

SiSonic microphone was developed as a cost effective alternative to traditional electret condenser microphones. Provided on tape-and-reel, SiSonic is ideally suited for high volume applications. It can be processed directly to a customer’s PCB using standard automatic pick-and-place equipment, and surface mounted via standard solder reflow equipment.

Microphone Dimensional Layout

Item

Dim.

Height Length Width Long Edge to C.L. Port Short Edge to C.L. Port Weight Coplanarity

Tol.

Units
grams mm

Microphone Pin Output

Recommended PCB Land Layout

Knowles Acoustics

Product Specifications

Test Conditions +20ºC, 60-70% R.H.

Directivity

Sensitivity Output impedance Current Consumption

Signal to Noise Ratio

Typical Input Referred Noise

Supply Voltage Sensitivity Loss across

Voltage Maximum Input Sound

Level

Operating Temperature Storage Temperature

Frequency Range

S ZOUT IDSS S/N

ENL Vs

Condition

Omni-directional 1kHz 0dB=1V/Pa 1kHz 0dB=1V/Pa across to volts 1kHz 0dB=1V/Pa

Limits Unit

Min. Nom. Max.

A-weighted

Change in sensitivity over 5.5v to 1.5v

No Change Across Voltage Range

At 100dB SPL, THD < 1% At 115dB SPL, THD = < 10%
+100
+100
100 10,000
dBA SPL
ºC ºC
More datasheets: ZV10D20E01 | ZV10B10E01 | ZV50B50A01 | ZV50B60A01 | MDM-51PCBR | PRIXP423BB | PRIXP425BC | IXGH10N300 | PA-1650-83S4-LF | DSSK20-0045AM


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SP0102NC3-2 Datasheet file may be downloaded here without warranties.

Datasheet ID: SP0102NC3-2 644961