L57GGD12V

L57GGD12V Datasheet

Part Number L57GGD12V

Part	Datasheet
L57GGD12V	L57GGD12V (pdf)

PDF Datasheet Preview
ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES z Low power consumption. z Long life - solid state reliability. z 12V internal resistor. z RoHS compliant. Package Dimensions T-1 3/4 5mm SOLID STATE LAMP Part Number L57GGD12V Green Descriptions z The Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. z Electrostatic discharge and power surge could damage the LEDs. z It is recommended to use a wrist band or antielectrostatic glove when handling the LEDs. z All devices, equipments and machineries must be electrically grounded. Notes All dimensions are in millimeters inches . Tolerance is unless otherwise noted. Lead spacing is measured where the leads emerge from the package. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO DSAK5521 APPROVED Wynec DATE SEP/22/2015 DRAWN F.T.Liu PAGE 1 OF 6 ERP 1101005684 Selection Guide Emitting Color Material Lens Type L57GGD12V Green GaP Green GaP Green Diffused Notes is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. Luminous intensity/ luminous Flux Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Iv mcd [2] V= 12V Viewing Angle [1] Min. Typ. 60° Electrical / Optical Characteristics at TA=25°C Parameter Emitting Color Typ. Max. Units Test Conditions λpeak Peak Wavelength Green VF=12V λD [1] Dominant Wavelength Green VF=12V

PDF Datasheet Preview

ATTENTION

OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES
z Low power consumption. z Long life - solid state reliability. z 12V internal resistor. z RoHS compliant.

Package Dimensions

T-1 3/4 5mm SOLID STATE LAMP

Part Number L57GGD12V

Green

Descriptions
z The Green source color devices are made with Gallium Phosphide Green Light Emitting Diode.
z Electrostatic discharge and power surge could damage the LEDs.
z It is recommended to use a wrist band or antielectrostatic glove when handling the LEDs.
z All devices, equipments and machineries must be electrically grounded.

Notes All dimensions are in millimeters inches . Tolerance is unless otherwise noted. Lead spacing is measured where the leads emerge from the package. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.

SPEC NO DSAK5521 APPROVED Wynec

DATE SEP/22/2015 DRAWN F.T.Liu

PAGE 1 OF 6 ERP 1101005684

Selection Guide

Emitting Color Material

Lens Type

L57GGD12V

Green GaP Green GaP

Green Diffused

Notes is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. Luminous intensity/ luminous Flux Luminous intensity value is traceable to the CIE127-2007 compliant national standards.

Iv mcd [2] V= 12V

Viewing Angle [1]

Min. Typ.
60°

Electrical / Optical Characteristics at TA=25°C

Parameter

Emitting Color

Typ.

Max.

Units Test Conditions
λpeak

Peak Wavelength

Green

VF=12V
λD [1]

Dominant Wavelength

Green

VF=12V

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived L57GGD12V Datasheet file may be downloaded here without warranties.

Datasheet ID: L57GGD12V 644863