L1034ID

L1034ID Datasheet

Part	Datasheet
L1034ID	L1034ID (pdf)

PDF Datasheet Preview
2mm FLAT TOP LED LAMP L-1034ID HIGH EFFICIENCY RED !MOUNTS FLUSH WITH PANEL. !LOW POWER CONSUMPTION. !LONG LIFE - SOLID STATE RELIABILITY. The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. Package Dimensions Notes All dimensions are in millimeters inches . Tolerance is unless otherwise noted. Lead spacing is measured where the lead emerge package. Specifications are subject to change without notice. SPEC NO DSAC1370 APPROVED J. Lu DATE DEC/09/2002 DRAWN F.Y.YUAN Selection Guide Dice Lens Type L-1034ID HIGH EFFICIENCY RED GaAsP/GaP RED DIFFUSED Note is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Iv mcd 10 mA Min. Typ. View in g Angle 70° Electrical / Optical Characteristics at T =25°C Parameter Device λpeak Peak Wavelength High Efficiency Red Dominate Wavelength High Efficiency Red Spectral Line Half-width High Efficiency Red Capacitance High Efficiency Red Forward Voltage High Efficiency Red Typ. 627 625 45 15 Max. Units nm pF V uA Test Conditions I F =20mA I F =20mA I F =20mA VF = 0V;f=1MHz I F =20mA VR = 5V Absolute Maximum Ratings at T =25°C Parameter Notes 1/10 Duty Cycle, 0.1ms Pulse Width. 2mm below package base. High Efficiency Red 105 30 160 5 -40°C To +85°C 260°C For 5 Seconds Units mW mA V

PDF Datasheet Preview

2mm FLAT TOP LED LAMP

L-1034ID

HIGH EFFICIENCY RED
!MOUNTS FLUSH WITH PANEL. !LOW POWER CONSUMPTION. !LONG LIFE - SOLID STATE RELIABILITY.

The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode.

Package Dimensions

Notes All dimensions are in millimeters inches . Tolerance is unless otherwise noted. Lead spacing is measured where the lead emerge package. Specifications are subject to change without notice.

SPEC NO DSAC1370 APPROVED J. Lu

DATE DEC/09/2002 DRAWN F.Y.YUAN

Selection Guide

Dice

Lens Type

L-1034ID

HIGH EFFICIENCY RED GaAsP/GaP RED DIFFUSED

Note is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.

Iv mcd 10 mA

Min.

Typ.

View in g Angle 70°

Electrical / Optical Characteristics at T =25°C

Parameter

Device
λpeak

Peak Wavelength High Efficiency Red

Dominate Wavelength High Efficiency Red

Spectral Line Half-width High Efficiency Red

Capacitance

High Efficiency Red

Forward Voltage High Efficiency Red

Typ. 627 625 45 15

Max.

Units nm pF V uA

Test Conditions I F =20mA I F =20mA I F =20mA

VF = 0V;f=1MHz I F =20mA VR = 5V

Absolute Maximum Ratings at T =25°C

Parameter

Notes 1/10 Duty Cycle, 0.1ms Pulse Width. 2mm below package base.

High Efficiency Red
105 30 160 5 -40°C To +85°C 260°C For 5 Seconds

Units
mW mA V

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived L1034ID Datasheet file may be downloaded here without warranties.

Datasheet ID: L1034ID 644860