C0603C103J3GECAUTO

C0603C103J3GECAUTO Datasheet

C0603C

Part	Datasheet
C0603C103J3GECAUTO	C0603C103J3GECAUTO (pdf)

Related Parts	Information
C0603C102J2GECAUTO	C0603C102J2GECAUTO

PDF Datasheet Preview
Surface Mount Multilayer Ceramic Chip Capacitors SMD MLCCs ESD, C0G Dielectric, 25 200 VDC Commercial & Automotive Grade Overview KEMET’s ESD Rated Commercial and Automotive Grade Series surface mount capacitors in C0G dielectric are suited for a variety of applications where Electro Static Discharge events during assembly or operation could damage the capacitor or the circuit ESD = Electro Static Discharge . These ESD rated capacitors provide the ability to design to a given ESD criteria per the Human Body Model HBM AEC criteria. KEMET's automotive grade series capacitors also meet the other demanding Automotive Electronics Council's qualification requirements. The C0G dielectric features a 125°C maximum operating temperature and is considered “stable.” The Electronics Industries Alliance EIA characterizes C0G dielectric as a Class I material. Components of this classification are temperature compensating and are suited for resonant circuit applications and those where Q and stability of capacitance characteristics are required. The C0G dielectric exhibits no change in capacitance with respect to time and voltage and boasts a negligible change in capacitance compared to its value at 25°C. Capacitance change is limited to ±30ppm/°C from −55°C to +125°C. • automotive qualified • ESD Qualified per HBM AEC • Available in package size EIA 0603 1608 • DC Voltage ratings of 25V 200V • Capacitance range from 1nF to 15nF • −55°C to +125°C operating temperature range • Lead Pb -Free, RoHS and REACH compliant • Available capacitance tolerances of ±1%, ±2%, ±5%, ±10%, and ±20% • No piezoelectric noise • Extremely low ESR and ESL • High thermal stability • High ripple current capability Click image above for interactive 3D content Open PDF in Adobe Reader for full functionality Ordering Information Ceramic 0603 Case Size L" x W" Specification/ Capacitance Rated Voltage Series Code pF Tolerance1 Dielectric 0603 C = Standard X = Flexible Termination Two significant digits and number of zeros F = ±1% G = ±2% J = ±5% K = ±10% M = ±20% 3 = 25 5 = 50 M = 63 1 = 100 2 = 200 G = C0G 1 Additional capacitance tolerance offerings may be available. Contact KEMET for details. 2 Additional termination finish options may be available. Contact KEMET for details. KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • Failure Rate/ Termination Design Finish2 E = ESD C = 100% Matte Sn AUTO Packaging/ Grade C-Spec See "Packaging C-Spec Ordering Options Table" below One world. One KEMET C1091_C0G_ESD • 12/5/2016 1 Surface Mount Multilayer Ceramic Chip Capacitors SMD MLCCs ESD, C0G Dielectric, 25 200 VDC Commercial & Automotive Grade Benefits cont'd • Preferred capacitance solution at line frequencies and • No capacitance decay with time into the MHz range • Non-polar devices, minimizing installation concerns • No capacitance changes with respect to applied DC • 100% pure matte tin-plated termination finish allowing for voltage excellent solderability • Negligible capacitance change with respect to temperature • Flexible Termination option available from −55°C to +125°C • EIA 0805 and 1206 Case Sizes Under Development Typical applications include ESD Electrostatic discharge , Integrated Circuit IC Protection, RF filtering function, input and output automotive applications like controllers, navigation systems, airbags and keyless systems Table 1 Capacitance Range/Selection Waterfall 0603 Case Size Capacitance 1.0nF 1.5nF 2.2nF 3.3nF 4.7nF 6.8nF 10nF 15nF Cap Code 102 152 222 332 472 682 103 153 Case Size/ Series Rated Voltage VDC 25 Voltage Code C0603C 50 63 100 200 Cap Tolerance F = ±1% G = ±2% J = ±5% K = ±10% M = ±20% ESD Level per 6KV 8KV 12KV 16KV 25KV 6KV 8KV 12KV 16KV 25KV 6KV 8KV 12KV 16KV 6KV 8KV 12KV 16KV 6KV 8KV 12KV KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • C1091_C0G_ESD • 12/5/2016 2 Surface Mount Multilayer Ceramic Chip Capacitors SMD MLCCs ESD, C0G Dielectric, 25 200 VDC Commercial & Automotive Grade Packaging C-Spec Ordering Options Table Packaging Type Packaging/Grade Ordering Code C-Spec Commercial Grade1 Bulk Bag 7" Reel/Unmarked 13" Reel/Unmarked 7" Reel/Unmarked/2mm pitch2 13" Reel/Unmarked/2mm pitch2 Not required Blank TU 7411 EIA 0603 and smaller case sizes 7210 EIA 0805 and larger case sizes 7081 7082 Automotive Grade3 7" Reel 13" Reel / Unmarked 7" Reel/Unmarked/2mm pitch2 AUTO AUTO7411 EIA 0603 and smaller case sizes AUTO7210 EIA 0805 and larger case sizes 3190 13" Reel/Unmarked/2mm pitch2 3191 1 Default packaging is "Bulk Bag". An ordering code C-Spec is not required for "Bulk Bag" packaging. 1 The terms "Marked" and "Unmarked" pertain to laser marking option of capacitors. All packaging options labeled as "Unmarked" will contain capacitors that have not been laser marked. The option to laser mark is not available on these devices. For more information see "Capacitor Marking". 2 The 2mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 1608 metric case size devices. For more information regarding 2mm pitch option see "Tape & Reel Packaging Information". 3 Reeling tape options Paper or Plastic are dependent on capacitor case size L" x W" and thickness dimension. See "Chip Thickness/Tape & Reel Packaging Quantities" and "Tape & Reel Packaging Information". 3 For additional Information regarding "AUTO" C-Spec options, see "Automotive C-Spec Information". 3 All Automotive packaging C-Specs listed exclude the option to laser mark components. The option to laser mark is not available on these devices. For more information see "Capacitor Marking". Dimensions Millimeters Inches EIA Size Code Metric Size Code L Length W Width Thickness Bandwidth Without Flexible Termination 0603 1608 See Table 2 for Thickness 0603 1608 With Flexible Termination See Table 2 for Thickness KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • S Separation Minimum Mounting Technique Solder Wave or Solder Reflow Solder Wave or Solder Reflow C1091_C0G_ESD • 12/5/2016 3 Surface Mount Multilayer Ceramic Chip Capacitors SMD MLCCs ESD, C0G Dielectric, 25 200 VDC Commercial & Automotive Grade Automotive C-Spec Information KEMET Automotive Grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test methods and conditions are referenced in document Stress Test Qualification for Passive Components. These products are supported by a Product Change Notification PCN and Production Part Approval Process warrant PPAP . Product Change Notification PCN The KEMET Product Change Notification system is used to communicate primarily the following types of changes: • Product/process changes that affect product form, fit, function, and/or reliability • Changes in manufacturing site • Product obsolescence KEMET Automotive C-Spec KEMET assigned1 AUTO Customer Notification due to: Process/Product change Yes with approval and sign off Yes without approval Obsolescence* Yes Days prior to implementation 180 days Minimum 90 days Minimum Production Part Approval Process PPAP The purpose of the Production Part Approval Process is: • To ensure that supplier can meet the manufacturability and quality requirements for the purchased parts. • To provide the evidence that all customer engineering design record and specification requirements are properly understood and fulfilled by the manufacturing organization. • To demonstrate that the established manufacturing process has the potential to produce the part KEMET Automotive C-Spec KEMET assigned1 AUTO PPAP Product Part Approval Process Level ● Part Number specific PPAP available Product family PPAP only KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • C1091_C0G_ESD • 12/5/2016 4 Surface Mount Multilayer Ceramic Chip Capacitors SMD MLCCs ESD, C0G Dielectric, 25 200 VDC Commercial & Automotive Grade Qualification/Certification Commercial Grade products are subject to internal qualification. Details regarding test methods and conditions are referenced in Table 4, Performance & Reliability. Automotive Grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test methods and conditions are referenced in document Stress Test Qualification for Passive Components. For additional information regarding the Automotive Electronics Council and please visit their website at Environmental Compliance Lead Pb -free, RoHS, and REACH compliant without exemptions. Electrical Parameters/Characteristics Item Parameters/Characteristics Operating Temperature Range −55°C to +125°C Capacitance Change with Reference to +25°C and 0 VDC Applied TCC ±30 ppm/ºC Aging Rate Maximum % Capacitance Loss/Decade Hour 1Dielectric Withstanding Voltage DWV 2Dissipation Factor DF Maximum Limit at 25°C 3Insulation Resistance IR Minimum Limit at 25°C 250% of rated voltage 5±1 seconds and charge/discharge not exceeding 50mA " 1,000 megohm microfarads or 100 GΩ Rated voltage applied for 120±5 seconds at 25°C 1 DWV is the voltage a capacitor can withstand survive for a short period of time. It exceeds the nominal and continuous working voltage of the capacitor. 2 Capacitance and dissipation factor DF measured under the following conditions 1 MHz ±100 kHz and Vrms if capacitance 1,000 pF 1 kHz ±50 Hz and Vrms if capacitance > 1,000 pF 3 To obtain IR limit, divide MΩ-µF value by the capacitance and compare to GΩ limit. Select the lower of the two limits. Note When measuring capacitance it is important to ensure the set voltage level is held constant. The HP4284 and Agilent E4980 have a feature known as Automatic Level Control ALC . The ALC feature should be switched to "ON." Post Environmental Limits Dielectric C0G Rated DC Voltage Post Environmental Limits Packaging Ordering Code C-Spec Packaging Type/Options C-3190 C-3191 C-7081 C-7082 Automotive grade 7" reel unmarked Automotive grade 13" reel unmarked Commercial grade 7" reel unmarked Commercial grade 13" reel unmarked * 2 mm pitch reel only available for 0603 EIA case size. 2 mm pitch reel for 0805 EIA case size under development. Benefits of Changing from 4 mm to 2 mm Pitching Spacing • Lower placement costs • Double the parts on each reel results in fewer reel changes and increased efficiency • Fewer reels result in lower packaging, shipping and storage costs, reducing waste KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • C1091_C0G_ESD • 12/5/2016 12 Surface Mount Multilayer Ceramic Chip Capacitors SMD MLCCs ESD, C0G Dielectric, 25 200 VDC Commercial & Automotive Grade Figure 1 Embossed Plastic Carrier Tape Dimensions ØDo Po [10 pitches cumulative tolerance on tape ± mm] Ko B1 Ao Bo Center Lines of Cavity Cover Tape B 1 is for tape feeder reference only, including draft concentric about B o. User Direction of Unreeling ØD 1 Embossment For cavity size, see Note 1 Table 4 Table 6 Embossed Plastic Carrier Tape Dimensions Metric will govern Tape Size 8 mm 12 mm 16 mm Constant Dimensions Millimeters Inches D1 Minimum Note 1 R Reference S1 Minimum Note 2 Note 3 Maximum T1 Maximum Tape Size 8 mm 12 mm 16 mm Pitch Single 4 mm Single 4 mm & Double 8 mm Triple 12 mm Variable Dimensions Millimeters Inches B1 Maximum Note 4 E2 Minimum T2 Maximum W Maximum

PDF Datasheet Preview

Surface Mount Multilayer Ceramic Chip Capacitors SMD MLCCs

ESD, C0G Dielectric, 25 200 VDC Commercial & Automotive Grade

Overview

KEMET’s ESD Rated Commercial and Automotive Grade Series surface mount capacitors in C0G dielectric are suited for a variety of applications where Electro Static Discharge events during assembly or operation could damage the capacitor or the circuit ESD = Electro Static Discharge . These ESD rated capacitors provide the ability to design to a given ESD criteria per the Human Body Model HBM AEC criteria. KEMET's automotive grade series capacitors also meet the other demanding Automotive Electronics Council's qualification requirements.

The C0G dielectric features a 125°C maximum operating temperature and is considered “stable.” The Electronics Industries Alliance EIA characterizes C0G dielectric as a Class I material. Components of this classification are temperature compensating and are suited for resonant circuit applications and those where Q and stability of capacitance characteristics are required. The C0G dielectric exhibits no change in capacitance with respect to time and voltage and boasts a negligible change in capacitance compared to its value at 25°C. Capacitance change is limited to ±30ppm/°C from −55°C to +125°C.
• automotive qualified
• ESD Qualified per HBM AEC
• Available in package size EIA 0603 1608
• DC Voltage ratings of 25V 200V
• Capacitance range from 1nF to 15nF
• −55°C to +125°C operating temperature range
• Lead Pb -Free, RoHS and REACH compliant
• Available capacitance tolerances of ±1%, ±2%, ±5%, ±10%, and ±20%
• No piezoelectric noise
• Extremely low ESR and ESL
• High thermal stability
• High ripple current capability

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality
Ordering Information

Ceramic
0603

Case Size L" x W"

Specification/ Capacitance Rated Voltage

Series

Code pF Tolerance1

Dielectric
0603

C = Standard X = Flexible Termination

Two significant digits and number of
zeros

F = ±1% G = ±2% J = ±5% K = ±10% M = ±20%
3 = 25 5 = 50 M = 63 1 = 100 2 = 200

G = C0G
1 Additional capacitance tolerance offerings may be available. Contact KEMET for details. 2 Additional termination finish options may be available. Contact KEMET for details.

KEMET Electronics Corporation
• P.O. Box 5928
• Greenville, SC 29606
• 864-963-6300
•

Failure Rate/ Termination

Design

Finish2

E = ESD

C = 100% Matte Sn

AUTO

Packaging/ Grade

C-Spec

See "Packaging
C-Spec Ordering Options Table"
below

One world. One KEMET C1091_C0G_ESD
• 12/5/2016 1

Surface Mount Multilayer Ceramic Chip Capacitors SMD MLCCs ESD, C0G Dielectric, 25 200 VDC Commercial & Automotive Grade

Benefits cont'd
• Preferred capacitance solution at line frequencies and
• No capacitance decay with time
into the MHz range
• Non-polar devices, minimizing installation concerns
• No capacitance changes with respect to applied DC
• 100% pure matte tin-plated termination finish allowing for
voltage
excellent solderability
• Negligible capacitance change with respect to temperature
• Flexible Termination option available
from −55°C to +125°C
• EIA 0805 and 1206 Case Sizes Under Development

Typical applications include ESD Electrostatic discharge , Integrated Circuit IC Protection, RF filtering function, input and output automotive applications like controllers, navigation systems, airbags and keyless systems

Table 1 Capacitance Range/Selection Waterfall 0603 Case Size

Capacitance
1.0nF 1.5nF 2.2nF 3.3nF 4.7nF 6.8nF 10nF 15nF

Cap Code
102 152 222 332 472 682 103 153

Case Size/ Series

Rated Voltage VDC 25

Voltage Code

C0603C
50 63 100 200

Cap Tolerance

F = ±1% G = ±2% J = ±5% K = ±10% M = ±20%

ESD Level per
6KV 8KV 12KV 16KV 25KV
6KV 8KV 12KV 16KV 25KV
6KV 8KV 12KV 16KV
6KV 8KV 12KV 16KV
6KV 8KV 12KV

KEMET Electronics Corporation
• P.O. Box 5928
• Greenville, SC 29606
• 864-963-6300
•

C1091_C0G_ESD
• 12/5/2016 2

Surface Mount Multilayer Ceramic Chip Capacitors SMD MLCCs ESD, C0G Dielectric, 25 200 VDC Commercial & Automotive Grade
Packaging C-Spec Ordering Options Table

Packaging Type
Packaging/Grade Ordering Code C-Spec

Commercial Grade1

Bulk Bag 7" Reel/Unmarked
13" Reel/Unmarked 7" Reel/Unmarked/2mm pitch2 13" Reel/Unmarked/2mm pitch2

Not required Blank

TU 7411 EIA 0603 and smaller case sizes 7210 EIA 0805 and larger case sizes
7081
7082

Automotive Grade3
7" Reel 13" Reel / Unmarked 7" Reel/Unmarked/2mm pitch2

AUTO

AUTO7411 EIA 0603 and smaller case sizes AUTO7210 EIA 0805 and larger case sizes
3190
13" Reel/Unmarked/2mm pitch2
3191
1 Default packaging is "Bulk Bag". An ordering code C-Spec is not required for "Bulk Bag" packaging. 1 The terms "Marked" and "Unmarked" pertain to laser marking option of capacitors. All packaging options labeled as "Unmarked" will contain
capacitors that have not been laser marked. The option to laser mark is not available on these devices. For more information see "Capacitor Marking". 2 The 2mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 1608 metric case
size devices. For more information regarding 2mm pitch option see "Tape & Reel Packaging Information". 3 Reeling tape options Paper or Plastic are dependent on capacitor case size L" x W" and thickness dimension. See "Chip Thickness/Tape & Reel

Packaging Quantities" and "Tape & Reel Packaging Information". 3 For additional Information regarding "AUTO" C-Spec options, see "Automotive C-Spec Information". 3 All Automotive packaging C-Specs listed exclude the option to laser mark components. The option to laser mark is not available on these devices. For
more information see "Capacitor Marking".

Dimensions Millimeters Inches

EIA Size Code

Metric Size Code

L Length

W Width

Thickness Bandwidth

Without Flexible Termination
0603
1608

See Table 2 for

Thickness
0603
1608

With Flexible Termination

See Table 2 for

Thickness

KEMET Electronics Corporation
• P.O. Box 5928
• Greenville, SC 29606
• 864-963-6300
•

S Separation Minimum

Mounting Technique

Solder Wave or Solder Reflow

Solder Wave or Solder Reflow

C1091_C0G_ESD
• 12/5/2016 3

Surface Mount Multilayer Ceramic Chip Capacitors SMD MLCCs ESD, C0G Dielectric, 25 200 VDC Commercial & Automotive Grade

Automotive C-Spec Information

KEMET Automotive Grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test methods and conditions are referenced in document Stress Test Qualification for Passive Components. These products are supported by a Product Change Notification PCN and Production Part Approval Process warrant PPAP .
Product Change Notification PCN The KEMET Product Change Notification system is used to communicate primarily the following types of changes:
• Product/process changes that affect product form, fit, function, and/or reliability
• Changes in manufacturing site
• Product obsolescence

KEMET Automotive C-Spec

KEMET assigned1 AUTO

Customer Notification due to:

Process/Product change Yes with approval and sign off

Yes without approval

Obsolescence* Yes

Days prior to implementation
180 days Minimum 90 days Minimum

Production Part Approval Process PPAP The purpose of the Production Part Approval Process is:
• To ensure that supplier can meet the manufacturability and quality requirements for the purchased parts.
• To provide the evidence that all customer engineering design record and specification requirements are properly understood and
fulfilled by the manufacturing organization.
• To demonstrate that the established manufacturing process has the potential to produce the part

KEMET Automotive C-Spec

KEMET assigned1 AUTO

PPAP Product Part Approval Process Level
● Part Number specific PPAP available Product family PPAP only

KEMET Electronics Corporation
• P.O. Box 5928
• Greenville, SC 29606
• 864-963-6300
•

C1091_C0G_ESD
• 12/5/2016 4

Surface Mount Multilayer Ceramic Chip Capacitors SMD MLCCs ESD, C0G Dielectric, 25 200 VDC Commercial & Automotive Grade

Qualification/Certification

Commercial Grade products are subject to internal qualification. Details regarding test methods and conditions are referenced in Table 4, Performance & Reliability.

Automotive Grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test methods and conditions are referenced in document Stress Test Qualification for Passive Components. For additional information regarding the Automotive Electronics Council and please visit their website at

Environmental Compliance

Lead Pb -free, RoHS, and REACH compliant without exemptions.

Electrical Parameters/Characteristics

Item

Parameters/Characteristics

Operating Temperature Range −55°C to +125°C

Capacitance Change with Reference to +25°C and 0 VDC Applied TCC
±30 ppm/ºC

Aging Rate Maximum % Capacitance Loss/Decade Hour 1Dielectric Withstanding Voltage DWV
2Dissipation Factor DF Maximum Limit at 25°C 3Insulation Resistance IR Minimum Limit at 25°C
250% of rated voltage 5±1 seconds and charge/discharge not exceeding 50mA "
1,000 megohm microfarads or 100 GΩ Rated voltage applied for 120±5 seconds at 25°C
1 DWV is the voltage a capacitor can withstand survive for a short period of time. It exceeds the nominal and continuous working voltage of the capacitor.
2 Capacitance and dissipation factor DF measured under the following conditions 1 MHz ±100 kHz and Vrms if capacitance 1,000 pF 1 kHz ±50 Hz and Vrms if capacitance > 1,000 pF 3 To obtain IR limit, divide MΩ-µF value by the capacitance and compare to GΩ limit. Select the lower of the two limits. Note When measuring capacitance it is important to ensure the set voltage level is held constant. The HP4284 and Agilent E4980 have a feature known as Automatic Level Control ALC . The ALC feature should be switched to "ON."

Post Environmental Limits

Dielectric C0G

Rated DC Voltage

Post Environmental Limits
Packaging Ordering Code

C-Spec

Packaging Type/Options

C-3190 C-3191 C-7081 C-7082

Automotive grade 7" reel unmarked Automotive grade 13" reel unmarked Commercial grade 7" reel unmarked Commercial grade 13" reel unmarked
* 2 mm pitch reel only available for 0603 EIA case size. 2 mm pitch reel for 0805 EIA case size under development.

Benefits of Changing from 4 mm to 2 mm Pitching Spacing
• Lower placement costs
• Double the parts on each reel results in fewer reel
changes and increased efficiency
• Fewer reels result in lower packaging, shipping and
storage costs, reducing waste

KEMET Electronics Corporation
• P.O. Box 5928
• Greenville, SC 29606
• 864-963-6300
•

C1091_C0G_ESD
• 12/5/2016 12

Surface Mount Multilayer Ceramic Chip Capacitors SMD MLCCs ESD, C0G Dielectric, 25 200 VDC Commercial & Automotive Grade

Figure 1 Embossed Plastic Carrier Tape Dimensions
ØDo

Po [10 pitches cumulative
tolerance on tape ± mm]

Ko B1

Ao Bo

Center Lines of Cavity

Cover Tape

B 1 is for tape feeder reference only, including draft concentric about B o.

User Direction of Unreeling
ØD 1

Embossment For cavity size, see Note 1 Table 4

Table 6 Embossed Plastic Carrier Tape Dimensions

Metric will govern

Tape Size 8 mm 12 mm 16 mm

Constant Dimensions Millimeters Inches

D1 Minimum Note 1

R Reference S1 Minimum

Note 2

Note 3 Maximum

T1 Maximum

Tape Size 8 mm 12 mm 16 mm

Pitch

Single 4 mm Single 4 mm & Double 8 mm Triple 12 mm

Variable Dimensions Millimeters Inches

B1 Maximum Note 4

E2 Minimum

T2 Maximum

W Maximum

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived C0603C103J3GECAUTO Datasheet file may be downloaded here without warranties.

Datasheet ID: C0603C103J3GECAUTO 644747