CA052X222K1GAC7536

CA052X222K1GAC7536 Datasheet

using the "0612" nomenclature. "CA064" replaces "C1632" in the ordering code.

Part	Datasheet
CA052X222K1GAC7536	CA052X222K1GAC7536 (pdf)

Related Parts	Information
CA052X102K1GAC7536	CA052X102K1GAC7536
CA052X222K1GAC7800	CA052X222K1GAC7800
CA052X102K1GAC7800	CA052X102K1GAC7800
CA052X101J1GAC7800	CA052X101J1GAC7800
CA052X101J1GAC7536	CA052X101J1GAC7536
CA052X102K3GAC7536	CA052X102K3GAC7536

PDF Datasheet Preview
Capacitor Array, C0G Dielectric, 10 200 VDC Commercial & Automotive Grade Overview KEMET’s Ceramic Chip Capacitor Array in C0G dielectric is an advanced passive technology where multiple capacitor elements are integrated into one common monolithic structure. Array technology promotes reduced placement costs and increased throughput. This is achieved by alternatively placing one device rather than two or four discrete devices. Use of capacitor arrays also saves board space which translates into increased board density and more functions per board. Arrays consume only a portion of the space required for standard chips resulting in savings in inventory and pick/place machine positions. KEMET’s C0G dielectric features a 125°C maximum operating temperature and is considered “stable. "The for resonant circuit applications or those where Q and stability of capacitance characteristics are required. C0G exhibits no change in capacitance with respect to time and voltage and boasts a negligible change in capacitance with reference to ambient temperature. Capacitance change is For added reliability, KEMET's Flexible Termination technology has been incorporated in order to provides of MLCCs and typically the result of excessive tensile thermal cycling. Flexible Termination technology inhibits the transfer of board stress to the rigid body of the MLCC, or short circuit failures. KEMET automotive grade array capacitors meet the demanding Automotive Electronics Council's AEC-Q200 Ordering Information CA 06 Ceramic Number of Capacitance Array Capacitors Series Tolerance 05 = 0508 2 = 2 X = Flexible J = ±5% 06 = 0612 4 = 4 Termination K = ±10% M = ±20% number of Rated Voltage ' 8 = 10 4 = 16 3 = 25 5 = 50 1 = 100 2 = 200 Dielectric G = C0G Failure Rate/ Design A = N/A Termination Finish2 Packaging/ C = 100% Matte Sn L = SnPb GSRXIRX See "Packaging C-Spec Ordering Options Table" below 1 All previous reference to metric case dimension "1632" has been replaced with an inch standard reference of Please reference all new designs using the "0612" nomenclature. "CA064" replaces "C1632" in the ordering code. One world. One KEMET KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • C1016_C0G_ARRAY_SMD • 1/9/2017 1 Surface Mount Multilayer Ceramic Chip Capacitors SMD MLCCs Capacitor Array, C0G Dielectric, 10 200 VDC, Commercial & Automotive Grade Packaging C-Spec Ordering Options Table Packaging Type Packaging/Grade Ordering Code C-Spec Commercial Grade1 Bulk Bag 7" Reel/Unmarked Automotive Grade2 7" Reel 13" Reel/Embossed Plastic/Unmarked TU 7210 AUTO AUTO7210 1 Default packaging is "Bulk Bag". An ordering code C-Spec is not required for "Bulk Bag" packaging. • Saves both circuit board and inventory space • Reduces placement costs and increases throughput • DC voltage ratings of 10 V, 16 V, 25 V, 50 V, 100 V, and 200 V • Capacitance offerings ranging from 10 pF to 2,200 pF • Available capacitance tolerances of ±5%, ±10%, and ±20% excellent solderability KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • C1016_C0G_ARRAY_SMD • 1/9/2017 2 Surface Mount Multilayer Ceramic Chip Capacitors SMD MLCCs Capacitor Array, C0G Dielectric, 10 200 VDC, Commercial & Automotive Grade Automotive C-Spec Information KEMET Automotive Grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Automotive products offered through our distribution channel have been assigned an inclusive ordering code C-Spec, by a KEMET engineering specialist. This C-Spec is therefore not intended for use by KEMET’s OEM Automotive customers and are not granted the same “privileges” as other automotive C-Specs. Customer PCN approval and PPAP request levels are • Changes in manufacturing site • Product obsolescence KEMET Automotive C-Spec KEMET assigned1 AUTO Process/Product change Obsolescence* Yes Days prior to implementation 180 days Minimum 90 days Minimum Production Part Approval Process PPAP • To ensure that supplier can meet the manufacturability and quality requirements for the purchased parts. understood and • To demonstrate that the established manufacturing process has the potential to produce the part KEMET Automotive C-Spec KEMET assigned1 AUTO PPAP Product Part Approval Process Level Product family PPAP only KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • C1016_C0G_ARRAY_SMD • 1/9/2017 3 Surface Mount Multilayer Ceramic Chip Capacitors SMD MLCCs Capacitor Array, C0G Dielectric, 10 200 VDC, Commercial & Automotive Grade Dimensions Millimeters Inches 0612 4-CAP Top View Profile View P Ref 0508 2-CAP Top View Profile View EIA Size Metric Size Code Code Length W Width Bandwidth Bandlength Thickness P Pitch P Reference 0508 0612 1220 1632 See Table 2 for Thickness Packaging Ordering Code C-Spec Packaging Type/Options C-3190 Automotive grade 7" reel unmarked C-3191 Automotive grade 13" reel unmarked C-7081 Commercial grade 7" reel unmarked C-7082 Commercial grade 13" reel unmarked • Lower placement costs • Double the parts on each reel results in fewer reel • Fewer reels result in lower packaging, shipping and storage costs, reducing waste KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • C1016_C0G_ARRAY_SMD • 1/9/2017 12 Surface Mount Multilayer Ceramic Chip Capacitors SMD MLCCs Capacitor Array, C0G Dielectric, 10 200 VDC, Commercial & Automotive Grade ØDo Po [10 pitches cumulative tolerance on tape ± mm] Ko B1 Ao Bo Center Lines of Cavity Cover Tape B 1 is for tape feeder reference only, including draft concentric about B o. User Direction of Unreeling ØD 1 Embossment For cavity size, see Note 1 Table 4 Table 6 Embossed Plastic Carrier Tape Dimensions Metric will govern 8 mm 12 mm 16 mm Constant Dimensions Millimeters Inches D1 Minimum Note 1 R Reference S1 Minimum Note 2 Note 3 Maximum T1 Maximum 8 mm 12 mm 16 mm Pitch Variable Dimensions Millimeters Inches B1 Maximum Note 4

PDF Datasheet Preview

Capacitor Array, C0G Dielectric, 10 200 VDC Commercial & Automotive Grade

Overview

KEMET’s Ceramic Chip Capacitor Array in C0G dielectric is an advanced passive technology where multiple capacitor elements are integrated into one common monolithic structure. Array technology promotes reduced placement costs and increased throughput. This is achieved by alternatively placing one device rather than two or four discrete devices. Use of capacitor arrays also saves board space which translates into increased board density and more functions per board. Arrays consume only a portion of the space required for standard chips resulting in savings in inventory and pick/place machine positions.

KEMET’s C0G dielectric features a 125°C maximum
operating temperature and is considered “stable. "The
for resonant circuit applications or those where Q and
stability of capacitance characteristics are required. C0G
exhibits no change in capacitance with respect to time and
voltage and boasts a negligible change in capacitance with
reference to ambient temperature. Capacitance change is

For added reliability, KEMET's Flexible Termination
technology has been incorporated in order to provides
of MLCCs and typically the result of excessive tensile
thermal cycling. Flexible Termination technology inhibits
the transfer of board stress to the rigid body of the MLCC,
or short circuit failures.

KEMET automotive grade array capacitors meet the
demanding Automotive Electronics Council's AEC-Q200
Ordering Information

CA 06

Ceramic Number of Capacitance

Array Capacitors Series

Tolerance
05 = 0508 2 = 2 X = Flexible

J = ±5%
06 = 0612 4 = 4 Termination K = ±10%

M = ±20%
number of

Rated Voltage '
8 = 10 4 = 16 3 = 25 5 = 50 1 = 100 2 = 200

Dielectric G = C0G

Failure Rate/ Design

A = N/A

Termination Finish2

Packaging/

C = 100% Matte Sn

L = SnPb GSRXIRX

See "Packaging
C-Spec Ordering Options Table"
below
1 All previous reference to metric case dimension "1632" has been replaced with an inch standard reference of Please reference all new designs
using the "0612" nomenclature. "CA064" replaces "C1632" in the ordering code.

One world. One KEMET

KEMET Electronics Corporation
• P.O. Box 5928
• Greenville, SC 29606
• 864-963-6300
•

C1016_C0G_ARRAY_SMD
• 1/9/2017 1

Surface Mount Multilayer Ceramic Chip Capacitors SMD MLCCs Capacitor Array, C0G Dielectric, 10 200 VDC, Commercial & Automotive Grade
Packaging C-Spec Ordering Options Table

Packaging Type
Packaging/Grade Ordering Code C-Spec

Commercial Grade1

Bulk Bag 7" Reel/Unmarked

Automotive Grade2
7" Reel 13" Reel/Embossed Plastic/Unmarked

TU 7210

AUTO AUTO7210
1 Default packaging is "Bulk Bag". An ordering code C-Spec is not required for "Bulk Bag" packaging.
• Saves both circuit board and inventory space
• Reduces placement costs and increases throughput
• DC voltage ratings of 10 V, 16 V, 25 V, 50 V, 100 V,
and 200 V
• Capacitance offerings ranging from 10 pF to 2,200 pF
• Available capacitance tolerances of ±5%, ±10%, and ±20%
excellent solderability

KEMET Electronics Corporation
• P.O. Box 5928
• Greenville, SC 29606
• 864-963-6300
•

C1016_C0G_ARRAY_SMD
• 1/9/2017 2

Surface Mount Multilayer Ceramic Chip Capacitors SMD MLCCs Capacitor Array, C0G Dielectric, 10 200 VDC, Commercial & Automotive Grade

Automotive C-Spec Information

KEMET Automotive Grade products meet or exceed the requirements outlined by the Automotive Electronics Council.
Automotive products offered through our distribution channel have been assigned an inclusive ordering code C-Spec,
by a KEMET engineering specialist. This C-Spec is therefore not intended for use by KEMET’s OEM Automotive customers
and are not granted the same “privileges” as other automotive C-Specs. Customer PCN approval and PPAP request levels are
• Changes in manufacturing site
• Product obsolescence

KEMET Automotive C-Spec

KEMET assigned1 AUTO

Process/Product change

Obsolescence* Yes

Days prior to implementation
180 days Minimum 90 days Minimum

Production Part Approval Process PPAP
• To ensure that supplier can meet the manufacturability and quality requirements for the purchased parts.
understood and
• To demonstrate that the established manufacturing process has the potential to produce the part

KEMET Automotive C-Spec

KEMET assigned1 AUTO

PPAP Product Part Approval Process Level

Product family PPAP only

KEMET Electronics Corporation
• P.O. Box 5928
• Greenville, SC 29606
• 864-963-6300
•

C1016_C0G_ARRAY_SMD
• 1/9/2017 3

Surface Mount Multilayer Ceramic Chip Capacitors SMD MLCCs Capacitor Array, C0G Dielectric, 10 200 VDC, Commercial & Automotive Grade

Dimensions Millimeters Inches
0612 4-CAP

Top View

Profile View

P Ref
0508 2-CAP

Top View

Profile View

EIA Size Metric Size

Code

Code

Length

W Width

Bandwidth Bandlength Thickness

P Pitch

P Reference
0508 0612
1220 1632

See Table 2 for Thickness
Packaging Ordering Code

C-Spec

Packaging Type/Options

C-3190

Automotive grade 7" reel unmarked

C-3191

Automotive grade 13" reel unmarked

C-7081

Commercial grade 7" reel unmarked

C-7082

Commercial grade 13" reel unmarked
• Lower placement costs
• Double the parts on each reel results in fewer reel
• Fewer reels result in lower packaging, shipping and
storage costs, reducing waste

KEMET Electronics Corporation
• P.O. Box 5928
• Greenville, SC 29606
• 864-963-6300
•

C1016_C0G_ARRAY_SMD
• 1/9/2017 12

Surface Mount Multilayer Ceramic Chip Capacitors SMD MLCCs Capacitor Array, C0G Dielectric, 10 200 VDC, Commercial & Automotive Grade
ØDo

Po [10 pitches cumulative
tolerance on tape ± mm]

Ko B1

Ao Bo

Center Lines of Cavity

Cover Tape

B 1 is for tape feeder reference only, including draft concentric about B o.

User Direction of Unreeling
ØD 1

Embossment For cavity size, see Note 1 Table 4

Table 6 Embossed Plastic Carrier Tape Dimensions

Metric will govern
8 mm 12 mm 16 mm

Constant Dimensions Millimeters Inches

D1 Minimum Note 1

R Reference S1 Minimum

Note 2

Note 3 Maximum

T1 Maximum
8 mm 12 mm 16 mm

Pitch

Variable Dimensions Millimeters Inches

B1 Maximum Note 4

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CA052X222K1GAC7536 Datasheet file may be downloaded here without warranties.

Datasheet ID: CA052X222K1GAC7536 644725