S7B-PH-SM3-TB

S7B-PH-SM3-TB Datasheet

Part	Datasheet
S7B-PH-SM3-TB	S7B-PH-SM3-TB (pdf)

Related Parts	Information
S14B-PH-K-S	S14B-PH-K-S
B9B-PH-K-S	B9B-PH-K-S
S16B-PH-K-S	S16B-PH-K-S
S4B-PH-SM3-TB	S4B-PH-SM3-TB
B4B-PH-K-S	B4B-PH-K-S
B2B-PH-K-S	B2B-PH-K-S
B14B-PH-K-S	B14B-PH-K-S
S4B-PH-K-S	S4B-PH-K-S
S15B-PH-K-S	S15B-PH-K-S
B2B-PH-SM3-TB	B2B-PH-SM3-TB
S2B-PH-SM3-TB	S2B-PH-SM3-TB
B9B-PH-SM3-TB	B9B-PH-SM3-TB
S9B-PH-SM3-TB	S9B-PH-SM3-TB
B3B-PH-SM3-TB	B3B-PH-SM3-TB
S3B-PH-K-S	S3B-PH-K-S
S5B-PH-K-S	S5B-PH-K-S
S8B-PH-K-S	S8B-PH-K-S
S9B-PH-K-S	S9B-PH-K-S
S7B-PH-K-S	S7B-PH-K-S
B11B-PH-SM3-TB	B11B-PH-SM3-TB
B7B-PH-K-S	B7B-PH-K-S
B6B-PH-K-S	B6B-PH-K-S
S12B-PH-SM3-TB	S12B-PH-SM3-TB
B5B-PH-K-S	B5B-PH-K-S
S5B-PH-SM3-TB	S5B-PH-SM3-TB
S8B-PH-SM3-TB	S8B-PH-SM3-TB
B6B-PH-SM3-TB	B6B-PH-SM3-TB
B4B-PH-SM3-TB	B4B-PH-SM3-TB
S10B-PH-K-S	S10B-PH-K-S
B8B-PH-K-S	B8B-PH-K-S
S11B-PH-K-S	S11B-PH-K-S
S12B-PH-K-S	S12B-PH-K-S
B7B-PH-SM3-TB	B7B-PH-SM3-TB
S13B-PH-K-S	S13B-PH-K-S
B12B-PH-K-S	B12B-PH-K-S
B5B-PH-SM3-TB	B5B-PH-SM3-TB
S6B-PH-SM3-TB	S6B-PH-SM3-TB
B11B-PH-K-S	B11B-PH-K-S
B15B-PH-K-S	B15B-PH-K-S
S13B-PH-SM3-TB	S13B-PH-SM3-TB
B15B-PH-SM3-TB	B15B-PH-SM3-TB
B8B-PH-SM3-TB	B8B-PH-SM3-TB
B10B-PH-K-S	B10B-PH-K-S
B3B-PH-K-S	B3B-PH-K-S
B16B-PH-SM3-TB	B16B-PH-SM3-TB
B14B-PH-SM3-TB	B14B-PH-SM3-TB
B10B-PH-SM3-TB	B10B-PH-SM3-TB
S6B-PH-K-S	S6B-PH-K-S
S10B-PH-SM3-TB	S10B-PH-SM3-TB
S14B-PH-SM3-TB	S14B-PH-SM3-TB
B12B-PH-SM3-TB	B12B-PH-SM3-TB
S3B-PH-SM3-TB	S3B-PH-SM3-TB
S15B-PH-SM3-TB	S15B-PH-SM3-TB
B13B-PH-K-S	B13B-PH-K-S
B16B-PH-K-S	B16B-PH-K-S
B13B-PH-SM3-TB	B13B-PH-SM3-TB
S2B-PH-K-S	S2B-PH-K-S
B4B-PH-K-K(LF)(SN)	B4B-PH-K-K(LF)(SN)

PDF Datasheet Preview
Crimp 2.0mm pitch PH CONNECTOR Disconnectable Crimp style connectors Emboss Tape This is a thin, low-profile 2.0mm pitch connector 7.5mm in height after mounting and 4.5mm in width. It is designed to meet the demand for high-density connection of internal wires to printed circuit boards. It is compact, highly reliable and low in cost. • Reliable contact The contact has long dimples near the center to ensure a good connection at all times, even under conditions of vibration and mechanical abuse, and when used with low voltage and low current circuits. • Fully shrouded header The fully shrouded header has walls on all four sides to prevent improper connection to the mating housing and to prevent the instruction of flux and other contaminants. • Printed circuit board retention mechanism The solder side of the header has a retention mechanism that prevents it from floating during soldering. As a result, the header can be positioned accurately. • Surface mount model SMT This connector is also available in a surface mount configuration. Its housing is made of heat resistant resin so that it is not adversely affected during reflow soldering. Because of its tiny size and ability to be surface mounted, this connector meets the demand for high-density mounting of components inside electronic products. 2 3 4 5 6 Specifications • Current rating 2A AC, DC AWG #24 • Voltage rating 100V AC, DC • Temperature range to including temperature rise in applying electrical current • Contact resistance Initial value/10m max. After environmental testing/20m max. • Insulation resistance 1,000M min. • Withstanding voltage 800V AC/minute • Applicable wire AWG #32 to #24 • Applicable PC board thickness to 1.6mm .031" to * Contact JST if Lead-Free product is required. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. Standards 0 Recognized E60389 1Certified LR20812 2R75087 PH CONNECTOR Contact Model No. SPH-002T-P0.5S SPH-002T-P0.5L SPH-004T-P0.5S mm2 to Applicable wire Q'ty / AWG # Insulation O.D. mm in. reel 30 to 24 to 8,000 28 to 24 to 8,000 32 to 28 to 10,000 Material and Finish Phosphor bronze, tin-plated Note Contact JST for gold-plated contacts. SPH-002T-P0.5L is low-insertion force type contact, for easier insertion/ withdrawal, which would be less resistant to the vibration. The crimp height is different from the standard. When using AWG#32 or #30 wires, reflow-treated headers Low insertion force type, Model No. B#B-PH-KL or S#B-PH-KL are recommendable. Contact JST for details. Housing Circuit No.1 Circuits 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

PDF Datasheet Preview

Crimp
2.0mm
pitch

PH CONNECTOR

Disconnectable Crimp style connectors

Emboss Tape

This is a thin, low-profile 2.0mm pitch connector 7.5mm in height after mounting and 4.5mm in width. It is designed to meet the demand for high-density connection of internal wires to printed circuit boards. It is compact, highly reliable and low in cost.
• Reliable contact

The contact has long dimples near the center to ensure a good connection at all times, even under conditions of vibration and mechanical abuse, and when used with low voltage and low current circuits.
• Fully shrouded header

The fully shrouded header has walls on all four sides to prevent improper connection to the mating housing and to prevent the instruction of flux and other contaminants.
• Printed circuit board retention mechanism

The solder side of the header has a retention mechanism that prevents it from floating during soldering. As a result, the header can be positioned accurately.
• Surface mount model SMT

This connector is also available in a surface mount configuration. Its housing is made of heat resistant resin so that it is not adversely affected during reflow soldering. Because of its tiny size and ability to be surface mounted, this connector meets the demand for high-density mounting of components inside electronic products.
2 3 4 5 6

Specifications
• Current rating 2A AC, DC AWG #24
• Voltage rating 100V AC, DC
• Temperature range to
including temperature rise in applying electrical current
• Contact resistance Initial value/10m max. After environmental testing/20m max.
• Insulation resistance 1,000M min.
• Withstanding voltage 800V AC/minute
• Applicable wire AWG #32 to #24
• Applicable PC board thickness to 1.6mm .031" to * Contact JST if Lead-Free product is required. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details.

Standards
0 Recognized E60389
1Certified LR20812 2R75087

PH CONNECTOR

Contact

Model No.

SPH-002T-P0.5S SPH-002T-P0.5L SPH-004T-P0.5S
mm2 to

Applicable wire

Q'ty /

AWG # Insulation O.D. mm in. reel
30 to 24 to 8,000
28 to 24 to 8,000
32 to 28 to 10,000

Material and Finish

Phosphor bronze, tin-plated

Note Contact JST for gold-plated contacts. SPH-002T-P0.5L is low-insertion force type contact, for easier insertion/
withdrawal, which would be less resistant to the vibration. The crimp height is different from the standard. When using AWG#32 or #30 wires, reflow-treated headers Low insertion force type, Model No. B#B-PH-KL or S#B-PH-KL are recommendable. Contact JST for details.

Housing

Circuit No.1

Circuits
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived S7B-PH-SM3-TB Datasheet file may be downloaded here without warranties.

Datasheet ID: S7B-PH-SM3-TB 644642