30FLT-SM2-TB(LF)(SN)

30FLT-SM2-TB(LF)(SN) Datasheet

06FLT-SM1-TB 08FLT-SM1-TB 10FLT-SM1-TB 12FLT-SM1-TB 14FLT-SM1-TB 16FLT-SM1-TB 18FLT-SM1-TB 20FLT-SM1-TB 22FLT-SM1-TB 24FLT-SM1-TB 26FLT-SM1-TB 28FLT-SM1-TB 30FLT-SM1-TB 32FLT-SM1-TB 40FLT-SM1-TB

Part	Datasheet
30FLT-SM2-TB(LF)(SN)	30FLT-SM2-TB(LF)(SN) (pdf)

PDF Datasheet Preview
0.5mm pitch FLT CONNECTOR Connectors for FPC Emboss Tape • Heat resistant design suitable for surface mounting The housing is made of heat resistant plastic to allow reflow soldering. • Staggered surface mount tails The lead pitch is thus 1.0mm which enables connector mounting operation easier. • Embossed tape for automatic mounting The FLT connector is packaged in embossed tape for automatic mounting. The plastic reel can be used repeatedly, good for eco-system. • FPC insertion is easy Staggered and unique contact point layout can reduce the FPC insertion force, yet with secure retention force. • Compact design This connector measures only 4.15mm high after mounting, with a reduced surface mounting area, as solder tabs are not necessary because of the staggered solder tail construction. Specifications • Current rating 0.5A AC, DC • Voltage rating 50V AC, DC • Temperature range to including temperature rise in applying electrical current • Contact resistance Initial value/50m max. After environmental testing/20m max. Variance from the initial • Insulation resistance 500M min. • Withstanding voltage 200V AC/minute • Applicable FPC Lead pitch/0.5mm Lead width/0.35mm Mating part thickness/ ± 0.05mm <Note>FPC to be actually used should be checked for applicability. * Contact JST if Lead-Free product is required. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. Standards 0 Recognized E60389 1Certified LR20812 FLT CONNECTOR Connector A B Circuit No.1 Circuits 6 8 10 12 14 16 18 20 22 24 26 28 30 32 40 Model No. 06FLT-SM1-TB 08FLT-SM1-TB 10FLT-SM1-TB 12FLT-SM1-TB 14FLT-SM1-TB 16FLT-SM1-TB 18FLT-SM1-TB 20FLT-SM1-TB 22FLT-SM1-TB 24FLT-SM1-TB 26FLT-SM1-TB 28FLT-SM1-TB 30FLT-SM1-TB 32FLT-SM1-TB 40FLT-SM1-TB Dimensions mm in. Q'ty / reel 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 Material and Finish Contact Phosphor bronze, copper-undercoated, tin/lead-plated Housing Nylon 46, UL94V-0 Note The products listed above are supplied on embossed-tape. 32FLT-SM1-TB and 40FLT-SM1-TB are not CSA approved. Taping specifications Feeding direction 12 to 30 circuits W1•25.5mm Feeding direction .061±.002 dia.

PDF Datasheet Preview

0.5mm
pitch

FLT CONNECTOR

Connectors for FPC

Emboss Tape
• Heat resistant design suitable for surface mounting

The housing is made of heat resistant plastic to allow reflow soldering.
• Staggered surface mount tails

The lead pitch is thus 1.0mm which enables connector mounting operation easier.
• Embossed tape for automatic mounting

The FLT connector is packaged in embossed tape for automatic mounting. The plastic reel can be used repeatedly, good for eco-system.
• FPC insertion is easy

Staggered and unique contact point layout can reduce the FPC insertion force, yet with secure retention force.
• Compact design

This connector measures only 4.15mm high after mounting, with a reduced surface mounting area, as solder tabs are not necessary because of the staggered solder tail construction.

Specifications
• Current rating 0.5A AC, DC
• Voltage rating 50V AC, DC
• Temperature range to
including temperature rise in applying electrical current
• Contact resistance Initial value/50m max. After environmental testing/20m max. Variance from the initial
• Insulation resistance 500M min.
• Withstanding voltage 200V AC/minute
• Applicable FPC Lead pitch/0.5mm Lead width/0.35mm Mating part thickness/ ± 0.05mm
<Note>FPC to be actually used should be checked for applicability.
* Contact JST if Lead-Free product is required. * Refer to "General Instruction and Notice when using

Terminals and Connectors" at the end of this catalog. * Contact JST for details.

Standards
0 Recognized E60389
1Certified LR20812

FLT CONNECTOR

Connector

A B Circuit No.1

Circuits
6 8 10 12 14 16 18 20 22 24 26 28 30 32 40

Model No.
06FLT-SM1-TB 08FLT-SM1-TB 10FLT-SM1-TB 12FLT-SM1-TB 14FLT-SM1-TB 16FLT-SM1-TB 18FLT-SM1-TB 20FLT-SM1-TB 22FLT-SM1-TB 24FLT-SM1-TB 26FLT-SM1-TB 28FLT-SM1-TB 30FLT-SM1-TB 32FLT-SM1-TB 40FLT-SM1-TB

Dimensions mm in.

Q'ty / reel 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500

Material and Finish

Contact Phosphor bronze, copper-undercoated, tin/lead-plated Housing Nylon 46, UL94V-0

Note The products listed above are supplied on embossed-tape. 32FLT-SM1-TB and 40FLT-SM1-TB are not CSA approved.

Taping specifications

Feeding direction
12 to 30 circuits W1•25.5mm

Feeding direction
.061±.002 dia.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 30FLT-SM2-TB(LF)(SN) Datasheet file may be downloaded here without warranties.

Datasheet ID: 30FLT-SM2-TB(LF)(SN) 644633