30FLS-RSM1-TB(LF)(SN)

30FLS-RSM1-TB(LF)(SN) Datasheet

30FLS-SM1-TB

Part	Datasheet
30FLS-RSM1-TB(LF)(SN)	30FLS-RSM1-TB(LF)(SN) (pdf)

Related Parts	Information
30FLS-SM1-TB(LF)(SN)	30FLS-SM1-TB(LF)(SN)

PDF Datasheet Preview
0.5mm pitch FLS CONNECTOR Connectors for FPC Emboss Tape • Easy location of FPC The shrouded FPC entry point allows the FPC to be positioned and hold in place before the connector is locked. • Zero insertion force mechanism A ZIF mechanism increases wear resistance and extends the connector’s mating life. • Heat resisting design suitable for surface mounting The housing is made of heat resisting resin to allow reflow soldering. • In-line surface mounting Has an in-line surface mount tails for easy inspection. • Two types of connections • Embossed tape for automatic mounting The FLS connector can be packaged in embossed tape for automatic mounting. Specifications • Current rating 0.5A AC, DC • Voltage rating 50V AC, DC • Temperature range to including temperature rise in applying electrical current • Contact resistance Initial value/40m max. After environmental testing/60m max. • Insulation resistance 800M min. • Withstanding voltage 200V AC/minute • Applicable FPC Conductor pitch/0.5mm Conductor width/0.35mm Mating part thickness/0.3±0.03mm <Note>FPC to be actually used should be checked for applicability. * Compliant with RoHS. * Refer to "General Instruction and Notice when using FJST Terminals and Connectors" at the end of this catalog. * Contact JST for details. Standards 0Recognized E60389 1Certified LR20812 FLS CONNECTOR Connector Normal type FJST Circuits Normal type

PDF Datasheet Preview

0.5mm pitch

FLS CONNECTOR Connectors for FPC

Emboss Tape
• Easy location of FPC

The shrouded FPC entry point allows the FPC to be positioned and hold in place before the connector is locked.
• Zero insertion force mechanism

A ZIF mechanism increases wear resistance and extends the connector’s mating life.
• Heat resisting design suitable for surface mounting

The housing is made of heat resisting resin to allow reflow soldering.
• In-line surface mounting

Has an in-line surface mount tails for easy inspection.
• Two types of connections
• Embossed tape for automatic mounting

The FLS connector can be packaged in embossed tape for automatic mounting.

Specifications
• Current rating 0.5A AC, DC
• Voltage rating 50V AC, DC
• Temperature range to
including temperature rise in applying
electrical current
• Contact resistance Initial value/40m max.

After environmental testing/60m max.
• Insulation resistance 800M min.
• Withstanding voltage 200V AC/minute
• Applicable FPC Conductor pitch/0.5mm

Conductor width/0.35mm

Mating part thickness/0.3±0.03mm
<Note>FPC to be actually used should be checked for applicability.
* Compliant with RoHS.
* Refer to "General Instruction and Notice when using

FJST

Terminals and Connectors" at the end of this catalog.
* Contact JST for details.

Standards
0Recognized E60389 1Certified LR20812

FLS CONNECTOR

Connector

Normal type

FJST

Circuits

Normal type

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 30FLS-RSM1-TB(LF)(SN) Datasheet file may be downloaded here without warranties.

Datasheet ID: 30FLS-RSM1-TB(LF)(SN) 644632