DSEC60-03AR

DSEC60-03AR Datasheet

DSEC 60-03AR

Part	Datasheet
DSEC60-03AR	DSEC60-03AR (pdf)

PDF Datasheet Preview
DSEC 60-03AR HiPerFREDTM Epitaxial Diode with common cathode and soft recovery IFAV = 2x30 A VRRM = 300 V trr = 30 ns VRSM VRRM Type A ISOPLUS 247TM DSEC 60-03AR A Isolated Symbol IFRMS IFAVM IFSM EAS IAR TVJ TVJM Tstg Ptot FC VISOL Weight RthJC RthCH trr Conditions TC = 135°C rectangular, d = TVJ = 45°C tp = 10 ms 50 Hz , sine TVJ = 25°C non-repetitive IAS = 3 A L = 180 µH VA = 1.5•VR typ. f = 10 kHz repetitive A = Anode, C = Cathode back surface n Maximum Ratings • International standard package • Planar passivated chips • Very short recovery time • Extremely low switching losses • Low IRM-values • Soft recovery behaviour • Epoxy meets UL 94V-0 • Isolated and UL registered E153432 TC = 25°C w mounting force with clip e 50/60 Hz, RMS, t = 1 minute, leads-to-tab 2500 n typical • Antiparallel diode for high frequency switching devices • Antisaturation diode • Snubber diode • Free wheeling diode in converters and motor control circuits • Rectifiers in switch mode power Conditions r VR = VRRM TVJ = 25°C TVJ = 150°C o IF = 30 A TVJ = 150°C fTVJ = 25°C t IF = 1 A -di/dt = 200 A/µs VR = 30 V TVJ = 25°C oVR = 100 V IF = 50 A -diF/dt = 100 A/µs NTVJ = 100°C Characteristic Values typ. max. supplies SMPS • Inductive heating • Uninterruptible power supplies UPS • Ultrasonic cleaners and welders Advantages • Avalanche voltage rated for reliable operation - Power dissipation within the diode - Turn-on loss in the commutating switch Dimensions see Outlines.pdf Pulse test Pulse Width = 5 ms, Duty Cycle <

PDF Datasheet Preview

DSEC 60-03AR

HiPerFREDTM Epitaxial Diode
with common cathode and soft recovery

IFAV = 2x30 A VRRM = 300 V trr = 30 ns

VRSM

VRRM

Type

A ISOPLUS 247TM

DSEC 60-03AR

A Isolated

Symbol IFRMS IFAVM IFSM EAS

IAR TVJ TVJM Tstg Ptot FC VISOL Weight

RthJC RthCH trr

Conditions

TC = 135°C rectangular, d = TVJ = 45°C tp = 10 ms 50 Hz , sine TVJ = 25°C non-repetitive IAS = 3 A L = 180 µH VA = 1.5•VR typ. f = 10 kHz repetitive

A = Anode, C = Cathode
back surface
n Maximum Ratings
• International standard package
• Planar passivated chips
• Very short recovery time
• Extremely low switching losses
• Low IRM-values
• Soft recovery behaviour
• Epoxy meets UL 94V-0
• Isolated and UL registered E153432

TC = 25°C
w mounting force with clip
e 50/60 Hz, RMS, t = 1 minute, leads-to-tab
2500
n typical
• Antiparallel diode for high frequency switching devices
• Antisaturation diode
• Snubber diode
• Free wheeling diode in converters
and motor control circuits
• Rectifiers in switch mode power

Conditions
r VR = VRRM TVJ = 25°C

TVJ = 150°C
o IF = 30 A TVJ = 150°C fTVJ = 25°C
t IF = 1 A -di/dt = 200 A/µs

VR = 30 V TVJ = 25°C
oVR = 100 V IF = 50 A -diF/dt = 100 A/µs NTVJ = 100°C

Characteristic Values typ. max.
supplies SMPS
• Inductive heating
• Uninterruptible power supplies UPS
• Ultrasonic cleaners and welders

Advantages
• Avalanche voltage rated for reliable operation
- Power dissipation within the diode - Turn-on loss in the commutating switch

Dimensions see Outlines.pdf

Pulse test Pulse Width = 5 ms, Duty Cycle <

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DSEC60-03AR Datasheet file may be downloaded here without warranties.

Datasheet ID: DSEC60-03AR 644167