LCA210LSTR

LCA210LSTR Datasheet

LCA210L

Part	Datasheet
LCA210LSTR	LCA210LSTR (pdf)

Related Parts	Information
LCA210L	LCA210L
LCA210LS	LCA210LS

PDF Datasheet Preview
LCA210L Dual Pole Relays Blocking Voltage Load Current Max RON LCA210L 350 100 35 Units V mA • Small 8 Pin DIP Package • Low Drive Power Requirements TTL/CMOS Compatible • No Moving Parts • High Reliability • Arc-Free With No Snubbing Circuits • 3750VRMS Input/Output Isolation • No EMI/RFI Generation • Machine Insertable, Wave Solderable • Surface Mount and Tape & Reel Versions Available • Telecom Switching • Tip/Ring Circuits • Modem Switching Laptop, Notebook, Pocket Size • Hookswitch • Dial Pulsing • Ground Start • Ringer Injection • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters Watt-Hour, Water, Gas • Medical Equipment-Patient/Equipment Isolation • Security • Aerospace • Industrial Controls The LCA210L is a common input 1-Form 2A solid state relay which has two independent optically couple MOSFETS controlled by a common input signal. The efficient current limiting MOSFET switches and photovoltaic die use Clare’s patented architecture to provide 3750 VRMS of input to output isolation. The optically coupled input is controlled by highly efficient GaAIAs infrared LEDs. Common input OptoMOS relays can replace standard dual pole relays in a variety of applications. The common input relay eliminates the need to make an external circuit connection when both poles are controlled by a common signal. Approvals • UL Recognized File Number E76270 • CSA Certified File Number LR 43639-10 • Certified to: • EN 60950 • EN 41003 • IEC 950 • AS/NZS 3260 Ordering Information Part # LCA210L LCA210LS LCA210LSTR Description 8 Pin DIP 50/Tube 8 Pin Surface Mount 50/Tube 8 Pin Surface Mount 1000/Reel Pin Configuration LCA210L Pinout 1 + Control 3 8 Output 1 7 Output 1 6 Output 2 5 Output 2 DS-LCA210L-R1.0 Switching Characteristics of Normally Open Form A Devices 10ms CONTROL LOAD 10%+ +90% 10%+ TON TOFF LCA210L Absolute Maximum Ratings C Parameter Input Power Dissipation Input Control Current Input to Output Operational Temperature Storage Temperature Soldering Temperature DIP Package Flatpack/Surface Mount Package 10 Seconds Max. 1 Derate Linearly 2 Derate Linearly Min Typ Max Units - 1501 mW - 100 mA - 350 V - 8002 mW 3750 -40 -40 - VRMS - +85 °C - +125 °C - +260 °C - +220 °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Electrical Characteristics Parameter Conditions Symbol Min Output Characteristics 25°C Load Current Continuous Peak Load Current 10ms max ILPK

PDF Datasheet Preview

LCA210L

Dual Pole Relays

Blocking Voltage Load Current Max RON

LCA210L 350 100 35

Units V mA
• Small 8 Pin DIP Package
• Low Drive Power Requirements TTL/CMOS

Compatible
• No Moving Parts
• High Reliability
• Arc-Free With No Snubbing Circuits
• 3750VRMS Input/Output Isolation
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
• Surface Mount and Tape & Reel Versions Available
• Telecom Switching
• Tip/Ring Circuits
• Modem Switching Laptop, Notebook, Pocket Size
• Hookswitch
• Dial Pulsing
• Ground Start
• Ringer Injection
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters Watt-Hour, Water, Gas
• Medical Equipment-Patient/Equipment Isolation
• Security
• Aerospace
• Industrial Controls

The LCA210L is a common input 1-Form 2A solid state relay which has two independent optically couple MOSFETS controlled by a common input signal. The efficient current limiting MOSFET switches and photovoltaic die use Clare’s patented architecture to provide 3750 VRMS of input to output isolation. The optically coupled input is controlled by highly efficient GaAIAs infrared LEDs. Common input OptoMOS relays can replace standard dual pole relays in a variety of applications. The common input relay eliminates the need to make an external circuit connection when both poles are controlled by a common signal.

Approvals
• UL Recognized File Number E76270
• CSA Certified File Number LR 43639-10
• Certified to:
• EN 60950
• EN 41003
• IEC 950
• AS/NZS 3260
Ordering Information

Part # LCA210L LCA210LS LCA210LSTR

Description 8 Pin DIP 50/Tube 8 Pin Surface Mount 50/Tube 8 Pin Surface Mount 1000/Reel

Pin Configuration

LCA210L Pinout 1
+ Control 3
8 Output 1
7 Output 1 6 Output 2
5 Output 2

DS-LCA210L-R1.0

Switching Characteristics of Normally Open Form A Devices
10ms

CONTROL

LOAD 10%+ +90% 10%+ TON TOFF

LCA210L

Absolute Maximum Ratings C

Parameter Input Power Dissipation Input Control Current

Input to Output Operational Temperature Storage Temperature Soldering Temperature

DIP Package Flatpack/Surface Mount Package 10 Seconds Max.
1 Derate Linearly 2 Derate Linearly

Min Typ Max Units
- 1501 mW
- 100 mA
- 350 V
- 8002 mW
3750 -40 -40
- VRMS
- +85 °C
- +125 °C
- +260 °C
- +220 °C

Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability.

Electrical Characteristics

Parameter

Conditions

Symbol Min

Output Characteristics 25°C

Load Current Continuous

Peak Load Current
10ms max

ILPK

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived LCA210LSTR Datasheet file may be downloaded here without warranties.

Datasheet ID: LCA210LSTR 644356