LBA126LS

LBA126LS Datasheet


LBA126L

Part Datasheet
LBA126LS LBA126LS LBA126LS (pdf)
Related Parts Information
LBA126LSTR LBA126LSTR LBA126LSTR
LBA126L LBA126L LBA126L
PDF Datasheet Preview
INTEGRATED CIRCUITS DIVISION

Parameter Blocking Voltage Load Current On-Resistance max

Ratings 250 150 20

Units

VP mArms / mADC
• Current Limited
• 3750Vrms Input/Output Isolation
• Low Drive Power Requirements TTL/CMOS

Compatible
• High Reliability
• Arc-Free With No Snubbing Circuits
• No EMI/RFI Generation
• Small 8-Pin Package
• Machine Insertable, Wave Solderable
• Surface Mount, Tape & Reel Version Available
• Telecommunications
• Telecom Switching
• Tip/Ring Circuits
• Modem Switching Laptop, Notebook, Pocket Size
• Hook Switch
• Dial Pulsing
• Ground Start
• Ringing Injection
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters Watt-Hour, Water, Gas
• Medical Equipment-Patient/Equipment Isolation
• Security
• Aerospace
• Industrial Controls

LBA126L

Dual Single-Pole

Relay

LBA126L comprises two independent 250V, 150mA, solid state relays one single-pole, normally open 1-Form-A , current limited relay and one single-pole, normally closed 1-Form-B relay. The device employs optically coupled MOSFET technology to provide 3750Vrms of input/output isolation.

Its optically coupled outputs, efficient MOSFET switches which use IXYS Integrated Circuits Division’s patented OptoMOS architecture, are controlled by a highly efficient GaAIAs infrared LED.

LBA126L is designed to provide an ideal solution where a complementary Form-A/Form-B relay pair is required in a space-saving single package.

Approvals
• UL Recognized Component File E76270
• CSA Certified Component Certificate 1175739
• EN/IEC 60950-1 Certified Component:

TUV Certificate B 09 07 49410 004
Ordering Information

Part # LBA126L LBA126LS LBA126LSTR

Description 8-Pin DIP 50/Tube 8-Pin Surface Mount 50/Tube 8-Pin Surface Mount 1,000/Reel

Pin Configuration

AC/DC Configuration
1 + Control - Normally Closed
2 Control - Normally Closed
3 + Control - Normally Open
4 Control - Normally Open
8 7 Normally Closed Pole 6

Normally Open Pole 5

DS-LBA126L-R04

Switching Characteristics of Normally Open Devices

Form-A

IF ILOAD
90% ton
10% toff

Switching Characteristics of Normally Closed Devices

Form-B

ILOAD
10% toff
90% ton

INTEGRATED CIRCUITS DIVISION

Absolute Maximum Ratings 25ºC

Ratings 250 5

Units VP V

Input Control Current

Peak 10ms Input Power Dissipation 1 Total Power Dissipation 2

Isolation Voltage, Input to Output Operational Temperature
3750

Vrms
-40 to +85 °C

Storage Temperature
-40 to +125 °C
1 Derate linearly mW / ºC 2 Derate linearly mW / ºC

LBA126L

Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied.

Electrical Characteristics 25ºC

Parameter Output Characteristics

Conditions

Load Current Continuous 1 Peak On-Resistance Off-State Leakage Current Switching Speeds
More datasheets: MMBD1705A | MMBD1705 | MMBD1703A | MMBD1703 | MMBD1704A | BCR 162L3 E6327 | BCR 162T E6327 | LTD-4608JR | LBA126LSTR | LBA126L


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived LBA126LS Datasheet file may be downloaded here without warranties.

Datasheet ID: LBA126LS 644355