ITC107PTR

ITC107PTR Datasheet

ITC107P

Part	Datasheet
ITC107PTR	ITC107PTR (pdf)

Related Parts	Information
ITC107P	ITC107P

PDF Datasheet Preview
ITC107P Integrated Telecom Circuits Voltage ITC107P 350 Units V Features • Small 16 Pin SOIC Package PCMCIA Compatible • Board Space and Cost Savings • No Moving Parts • 3750VRMS Input/Output Isolation • FCC Compatible Part 68 • Photodarlington Hook Switch • Full-Wave Bridge Rectifier • Darlington Transistor for Electronic Inductor “Dry” Circuits • Full Wave Current Detector for Ring Signal or Loop Current Detect • JEDEC Standard Pin Out Description The Integrated Telecom Circuit combines a high voltage optically isolated photodarlington, bridge rectifier, Darlington transistor and optocoupler into one 16 pin SOIC package, consolidating designs and reducing component count in telecom applications. The ITC107’s optocoupler provides for full wave detection of ring signals. Approvals • UL Recognized • Complies with EN 60950 Ordering Information Part # ITC107P ITC107PTR 16 Pin SOIC 50/Tube 16 Pin SOIC 1000/Reel Applications • Data/Fax Modem • Voice Mail Systems • Telephone Sets • Computer Telephony Integration • Set Top Box Modems Pin Configuration Photodarlington LED 2 Anode Photodarlington LED 3 Cathode 4 NC 5 Collector -Phototransistor 7 Emitter -Phototransistor 8 16 Photodarlington Emitter 15 Darlington Emitter 14 Darlington Base 13 Bridge Output - 12 Bridge Input 11 Bridge Input 10 Phototransistor LED 9 Phototansistor LED DS-ITC107P-R1.2 ITC107P Absolute Maximum Ratings C Parameter Total Package Dissipation Isolation Voltage Input to Output 3750 Operational Temperature Storage Temperature Soldering Temperature 10 Seconds Max. 1 Above derate linerity Total Power Dissipation PD : PD=PHOOKSWITCH + PBRIDGE + PDARLINGTON + PLED PD= RDS on I2L + 2 VF IL + VCE IL + VLED IF WHERE: RDS on = Maximum realy on resistance = Maximum loop current = Maximum diode forward voltage VCE = Maximum voltage collector to emitter VLED = Maximum LED forward voltage = Maximum LED current Typ Max Units - 11 W - VRMS - +85 °C - +125 °C - +220 °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Electrical Characteristics

PDF Datasheet Preview

ITC107P

Integrated Telecom Circuits

Voltage

ITC107P 350

Units V

Features
• Small 16 Pin SOIC Package PCMCIA Compatible
• Board Space and Cost Savings
• No Moving Parts
• 3750VRMS Input/Output Isolation
• FCC Compatible Part 68
• Photodarlington Hook Switch
• Full-Wave Bridge Rectifier
• Darlington Transistor for Electronic Inductor “Dry”

Circuits
• Full Wave Current Detector for Ring Signal or Loop

Current Detect
• JEDEC Standard Pin Out

Description The Integrated Telecom Circuit combines a high voltage optically isolated photodarlington, bridge rectifier, Darlington transistor and optocoupler into one 16 pin SOIC package, consolidating designs and reducing component count in telecom applications. The ITC107’s optocoupler provides for full wave detection of ring signals.

Approvals
• UL Recognized
• Complies with EN 60950
Ordering Information

Part #

ITC107P ITC107PTR
16 Pin SOIC 50/Tube 16 Pin SOIC 1000/Reel

Applications
• Data/Fax Modem
• Voice Mail Systems
• Telephone Sets
• Computer Telephony Integration
• Set Top Box Modems

Pin Configuration

Photodarlington LED 2 Anode

Photodarlington LED 3 Cathode 4 NC 5

Collector -Phototransistor 7 Emitter -Phototransistor 8
16 Photodarlington Emitter 15 Darlington Emitter
14 Darlington Base 13 Bridge Output - 12 Bridge Input
11 Bridge Input 10 Phototransistor LED
9 Phototansistor LED

DS-ITC107P-R1.2

ITC107P

Absolute Maximum Ratings C

Parameter

Total Package Dissipation

Isolation Voltage

Input to Output
3750

Operational Temperature

Storage Temperature

Soldering Temperature
10 Seconds Max.
1 Above derate linerity

Total Power Dissipation PD :

PD=PHOOKSWITCH + PBRIDGE + PDARLINGTON + PLED PD= RDS on I2L + 2 VF IL + VCE IL + VLED IF WHERE:

RDS on = Maximum realy on resistance
= Maximum loop current
= Maximum diode forward voltage

VCE = Maximum voltage collector to emitter

VLED = Maximum LED forward voltage
= Maximum LED current

Typ Max Units - 11 W
- VRMS
- +85 °C
- +125 °C
- +220 °C

Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied.

Electrical Characteristics

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ITC107PTR Datasheet file may be downloaded here without warranties.

Datasheet ID: ITC107PTR 644232