CPC2400E-EVAL

CPC2400E-EVAL Datasheet

CPC2400E

Part	Datasheet
CPC2400E-EVAL	CPC2400E-EVAL (pdf)

Related Parts	Information
CPC2400E	CPC2400E

PDF Datasheet Preview
INTEGRATED CIRCUITS DIVISION • Easy Integration • Small Footprint x • Full Duplex 2400bps • Low Power Consumption • V.24 DTE Interface • Single +5V Supply Operation • Supported Protocols V.22bis, V.23, V.22 • UL Recognized Component • FCC Part 15B Compliant • FCC Part 68 Approved User Transferrable • Vending/Gaming Machines • Set Top Box Back Channel • Direct Broadcast Satellite • Utility Meters • Point of Sale Terminals • Remote Diagnostics • Remote Telemetry • Remote Monitoring • Embedded Applications CPC2400E Embedded Modem Module The CPC2400E is a 2400 baud embedded modem module intended for applications that require a data communications link to the Public Switched Telephone Network PSTN . The CPC2400E is a complete module on a small x printed circuit board that can be socketed or soldered into the host system mother board. The module is FCC Part 68 approved and includes a user transferrable registration number. It also is a UL recognized component. The CPC2400E can be used in a variety of applications including set top box back channel communications, vending machines, remote utility metering, remote data acquisition, plus a host of other applications. The CPC2400E supports a standard serial V.24 TTL interface to the DTE equipment. Approvals • UL/C-UL 174201 • FCC Reg. # LVRPHL-25931-MD-E Ordering Information Part # CPC2400E Description 2400 Baud Embedded Modem Module Block Diagram PARALLEL CONTROLLER V.24 SERIAL V.22BIS DATA PUMP LINE INTERFACE TIP RING AUDIO OUT Pin Configuration -DTR -DCD -MUTE J2 N/C TIP N/C RING N/C DS-CPC2400E-R03 INTEGRATED CIRCUITS DIVISION CPC2400E Absolute Maximum Ratings 25ºC Parameter Dielectric Withstanding Voltage Tip/Ring Current Continuous Operating Temperature Storage Temperature Relative Humidity Non-Condensing 10 Max 1000 120 70 100 85 Units Vrms mA ºC ºC % 1 Derate linearly mW / ºC Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Electrical Characteristics Parameter Conditions DC Electrical Characteristics 25ºC VCC Supply Voltage VCC Supply Current - Idle Sleep Mode VCC Supply Current - Active Line Matching Impedance Ringing Voltage Ringer Equivalence Number REN Telephone Line Loop Current DTE DC Characteristics 25ºC VCC=5V VCC=5V VCC=5V

PDF Datasheet Preview

INTEGRATED CIRCUITS DIVISION
• Easy Integration
• Small Footprint x
• Full Duplex 2400bps
• Low Power Consumption
• V.24 DTE Interface
• Single +5V Supply Operation
• Supported Protocols V.22bis, V.23, V.22
• UL Recognized Component
• FCC Part 15B Compliant
• FCC Part 68 Approved User Transferrable
• Vending/Gaming Machines
• Set Top Box Back Channel
• Direct Broadcast Satellite
• Utility Meters
• Point of Sale Terminals
• Remote Diagnostics
• Remote Telemetry
• Remote Monitoring
• Embedded Applications

CPC2400E

Embedded Modem Module

The CPC2400E is a 2400 baud embedded modem module intended for applications that require a data communications link to the Public Switched Telephone Network PSTN . The CPC2400E is a complete module on a small x printed circuit board that can be socketed or soldered into the host system mother board. The module is FCC Part 68 approved and includes a user transferrable registration number. It also is a UL recognized component. The CPC2400E can be used in a variety of applications including set top box back channel communications, vending machines, remote utility metering, remote data acquisition, plus a host of other applications. The CPC2400E supports a standard serial V.24 TTL interface to the DTE equipment.

Approvals
• UL/C-UL 174201
• FCC Reg. # LVRPHL-25931-MD-E
Ordering Information

Part # CPC2400E

Description 2400 Baud Embedded Modem Module

Block Diagram

PARALLEL

CONTROLLER

V.24 SERIAL

V.22BIS DATA PUMP

LINE INTERFACE

TIP RING

AUDIO OUT

Pin Configuration
-DTR
-DCD
-MUTE

J2 N/C TIP N/C RING N/C

DS-CPC2400E-R03

INTEGRATED CIRCUITS DIVISION

CPC2400E

Absolute Maximum Ratings 25ºC

Parameter

Dielectric Withstanding Voltage

Tip/Ring Current Continuous

Operating Temperature

Storage Temperature

Relative Humidity Non-Condensing 10

Max 1000 120 70 100 85

Units Vrms mA ºC ºC %
1 Derate linearly mW / ºC

Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability.

Electrical Characteristics

Parameter

Conditions

DC Electrical Characteristics 25ºC

VCC Supply Voltage VCC Supply Current - Idle Sleep Mode VCC Supply Current - Active Line Matching Impedance

Ringing Voltage

Ringer Equivalence Number REN

Telephone Line Loop Current DTE DC Characteristics 25ºC

VCC=5V

VCC=5V

VCC=5V

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CPC2400E-EVAL Datasheet file may be downloaded here without warranties.

Datasheet ID: CPC2400E-EVAL 644118