CPC1822N

CPC1822N Datasheet

CPC1822

Part	Datasheet
CPC1822N	CPC1822N (pdf)

PDF Datasheet Preview
INTEGRATED CIRCUITS DIVISION Parameter Open Circuit Voltage Short Circuit Current Rating 4 50 * Direct sunlight Approximately 6000 lux Units V uA • 4V Output • Triggers with Natural Sunlight • Provides True Wireless Power • No EMI/RFI Generation • Wave Solderable • Replacement of Discrete Components • Solid State Reliability • Small 8-Pin Surface Mount SOIC • Portable Electronics • Solar Battery Chargers • Battery Operated Equipment • Consumer Electronics • Off-Grid Installation • Wireless Sensors and Detection • Flame Detection • Self Powered Sunlight/ Light Detection • Self Powered Products • Remote Installation CPC1822 4V Output Solar Cell The CPC1822 is a monolithic photovoltaic string of solar cells with switching circuitry. When operating in sunlight or a bright artificial light environment the optical energy will activate the cell array and generate a voltage at the output. The solar cells are capable of generating a floating source voltage and current sufficient to drive and power CMOS ICs, logic gates and/or provide “trickle charge” for battery applications. Ordering Information Part # CPC1822N CPC1822NTR Description 8-Pin Clear Molded SOIC Package 100/Tube 8-Pin Clear Molded SOIC Package 2000/Reel Pin Configuration DS-CPC1822-R03 INTEGRATED CIRCUITS DIVISION Absolute Maximum Ratings Ratings 10 Operational Temperature -40 to +85 Storage Temperature -40 to +125 Units V °C °C Electrical absolute maximum ratings are at 25°C Electrical Characteristics Parameter Output Characteristics 25°C Open Circuit Voltage Short Circuit Current Conditions Direct Sun 6000 lux High Intensity Lamp Direct Sun 6000 lux CPC1822 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Max Units PERFORMANCE DATA* Normalized Open Circuit Output Voltage vs. Light Intensity Normalized Output Current P! Normalized Short Circuit Output Current vs. Light Intensity Normalized Output Voltage V Normalized Open Circuit Output Voltage vs. Incident Angle of Light to Photodiode Surface Incident Angle Degrees Normalized Output Current PA Normalized Short Circuit Output Current vs. Incident Angle of Light to Photodiode Surface Incident Angle Degrees *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written please contact our application department. INTEGRATED CIRCUITS DIVISION CPC1822 Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level MSL rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device CPC1822N

PDF Datasheet Preview

INTEGRATED CIRCUITS DIVISION

Parameter Open Circuit Voltage Short Circuit Current

Rating 4 50
* Direct sunlight Approximately 6000 lux

Units V uA
• 4V Output
• Triggers with Natural Sunlight
• Provides True Wireless Power
• No EMI/RFI Generation
• Wave Solderable
• Replacement of Discrete Components
• Solid State Reliability
• Small 8-Pin Surface Mount SOIC
• Portable Electronics
• Solar Battery Chargers
• Battery Operated Equipment
• Consumer Electronics
• Off-Grid Installation
• Wireless Sensors and Detection
• Flame Detection
• Self Powered Sunlight/ Light Detection
• Self Powered Products
• Remote Installation

CPC1822
4V Output Solar Cell

The CPC1822 is a monolithic photovoltaic string of solar cells with switching circuitry. When operating in sunlight or a bright artificial light environment the optical energy will activate the cell array and generate a voltage at the output. The solar cells are capable of generating a floating source voltage and current sufficient to drive and power CMOS ICs, logic gates and/or provide “trickle charge” for battery applications.
Ordering Information

Part # CPC1822N CPC1822NTR

Description 8-Pin Clear Molded SOIC Package 100/Tube 8-Pin Clear Molded SOIC Package 2000/Reel

Pin Configuration

DS-CPC1822-R03

INTEGRATED CIRCUITS DIVISION

Absolute Maximum Ratings

Ratings 10

Operational Temperature
-40 to +85

Storage Temperature
-40 to +125

Units V °C °C

Electrical absolute maximum ratings are at 25°C

Electrical Characteristics

Parameter Output Characteristics 25°C Open Circuit Voltage

Short Circuit Current

Conditions

Direct Sun 6000 lux High Intensity Lamp Direct Sun 6000 lux

CPC1822

Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied.

Max Units

PERFORMANCE DATA*

Normalized Open Circuit Output Voltage vs. Light Intensity

Normalized Output Current P!

Normalized Short Circuit Output Current vs. Light Intensity

Normalized Output Voltage V

Normalized Open Circuit Output Voltage vs. Incident Angle of Light to Photodiode Surface

Incident Angle Degrees

Normalized Output Current PA

Normalized Short Circuit Output Current vs. Incident Angle of Light to Photodiode Surface

Incident Angle Degrees
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written please contact our application department.

INTEGRATED CIRCUITS DIVISION

CPC1822

Manufacturing Information

Moisture Sensitivity

All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below.

Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability.

This product carries a Moisture Sensitivity Level MSL rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.

Device CPC1822N

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CPC1822N Datasheet file may be downloaded here without warranties.

Datasheet ID: CPC1822N 644112