CPC1560GSTR

CPC1560GSTR Datasheet

CPC1560

Part	Datasheet
CPC1560GSTR	CPC1560GSTR (pdf)

Related Parts	Information
CPC1560G	CPC1560G
CPC1560GS	CPC1560GS

PDF Datasheet Preview
CPC1560 Solid State Relay with Integrated Current Limit • Fast Turn-On • Built-In Active Current Limit Protection • Thermal Shutdown • Linear AC or DC Operation • Low Power Consumption • Clean, Bounce-Free Switching • High Surge Capability • Low Power Drive Requirements • Surface Mount Version Available • Tape & Reel Packaging Available • Instrumentation • Automatic Tuning/Balancing • Analog Multiplex • Peripherals • Automatic Tuning/Balancing • Transducer Driver • Security • Medical Equipment Approvals • UL 508 Pending Figure CPC1560 Block Diagram The CPC1560 is a 1-Form-A Single Pole, Normally Open optically isolated MOSFET switch that provides fast turn-on of loads up to 600mADC in a DC-Only configuration, 300mArms in an AC/DC configuration active current-limit circuitry and 3750Vrms of I/O isolation. Fast turn-on is accomplished with the use of an external charge storage capacitor that provides the necessary charge required by the internal switching MOSFETs. The device charges this capacitor, through bootstrap diodes, from the load voltage, thereby alleviating the need for an additional power supply. The CPC1560 incorporates thermal shutdown circuitry for improved survivability in harsh environments, and is designed to pass regulatory voltage surge requirements when provided with appropriate over-voltage protection circuitry. Designed specifically for environmentally demanding AC or DC applications, where printed circuit board space is at a premium and additional power supplies are not available, the CPC1560 is an ideal solution. Ordering Information Part CPC1560G CPC1560GS CPC1560GSTR Description 8-Pin, DIP Through-Hole 50/Tube 8-Pin, Surface Mount 50/Tube 8-Pin, Surface Mount 1000/Reel 7 OUTPUT 2 LED+ Current Limit Control 2002/95/EC 3 LED- e3 4 NC DS-CPC1560 - R00E 6 5 OUTPUT CPC1560 Specifications 3 Package Pinout 3 Pin Description. 3 Absolute Maximum Ratings 3 ESD Rating 3 Recommended Operating Conditions 4 Typical Configurations 4 General Conditions 5 Electrical Specifications 5 Timing Diagram 5 Performance Data 6 Introduction 8 Functional Description 8 Device Configuration. 8 LED Resistor 8 Storage Capacitor 9 Operational Behavior 9 Operating Frequency 9 Duty Cycle/Power Dissipation. 9 Temperature Effects 9 Elements of Operating Frequency 9 Switching Losses 9 Effects of Ambient Temperature 10 Current Limit and Thermal Shutdown 10 Current Limit 10 Thermal Shutdown 10 dV/dt Fault Tolerance. 10 Power Derating 10 Rise and Fall Times 11 Over-Voltage Protection. 11 Stored Energy in the Load 11 Protection Methods 12 Manufacturing Information 13 Soldering 13 Washing. 13 Mechanical Dimensions. 13 Tape and Reel Specification 14 R00E Specifications Package Pinout LED + 2 LED - 3 8 C+ 7 OUTPUT 6 OUTPUT 5 C- CPC1560 Pin Description Pin# Name NC Not connected LED + Positive input to LED LED - Negative input to LED NC Not connected C- External Capacitor, Negative Terminal 6 OUTPUT Switch Output 7 OUTPUT Switch Output C+ External Capacitor, Positive Terminal Absolute Maximum Ratings Parameter Rating 60 5 Units VP V 160 V/us

PDF Datasheet Preview

CPC1560

Solid State Relay with Integrated Current Limit
• Fast Turn-On
• Built-In Active Current Limit Protection
• Thermal Shutdown
• Linear AC or DC Operation
• Low Power Consumption
• Clean, Bounce-Free Switching
• High Surge Capability
• Low Power Drive Requirements
• Surface Mount Version Available
• Tape & Reel Packaging Available
• Instrumentation
• Automatic Tuning/Balancing
• Analog Multiplex
• Peripherals
• Automatic Tuning/Balancing
• Transducer Driver
• Security
• Medical Equipment

Approvals
• UL 508 Pending

Figure CPC1560 Block Diagram

The CPC1560 is a 1-Form-A Single Pole, Normally Open optically isolated MOSFET switch that provides fast turn-on of loads up to 600mADC in a DC-Only configuration, 300mArms in an AC/DC configuration active current-limit circuitry and 3750Vrms of I/O isolation.

Fast turn-on is accomplished with the use of an external charge storage capacitor that provides the necessary charge required by the internal switching MOSFETs. The device charges this capacitor, through bootstrap diodes, from the load voltage, thereby alleviating the need for an additional power supply.

The CPC1560 incorporates thermal shutdown circuitry for improved survivability in harsh environments, and is designed to pass regulatory voltage surge requirements when provided with appropriate over-voltage protection circuitry.

Designed specifically for environmentally demanding AC or DC applications, where printed circuit board space is at a premium and additional power supplies are not available, the CPC1560 is an ideal solution.
Ordering Information

Part CPC1560G CPC1560GS CPC1560GSTR

Description 8-Pin, DIP Through-Hole 50/Tube 8-Pin, Surface Mount 50/Tube 8-Pin, Surface Mount 1000/Reel
7 OUTPUT
2 LED+

Current Limit

Control
2002/95/EC
3 LED-
e3 4 NC

DS-CPC1560 - R00E
6 5 OUTPUT

CPC1560

Specifications 3 Package Pinout 3 Pin Description. 3 Absolute Maximum Ratings 3 ESD Rating 3 Recommended Operating Conditions 4 Typical Configurations 4 General Conditions 5 Electrical Specifications 5 Timing Diagram 5 Performance Data 6

Introduction 8

Functional Description 8

Device Configuration. 8 LED Resistor 8 Storage Capacitor 9

Operational Behavior 9 Operating Frequency 9 Duty Cycle/Power Dissipation. 9 Temperature Effects 9 Elements of Operating Frequency 9 Switching Losses 9 Effects of Ambient Temperature 10 Current Limit and Thermal Shutdown 10 Current Limit 10 Thermal Shutdown 10 dV/dt Fault Tolerance. 10 Power Derating 10 Rise and Fall Times 11 Over-Voltage Protection. 11 Stored Energy in the Load 11 Protection Methods 12

Manufacturing Information 13 Soldering 13 Washing. 13 Mechanical Dimensions. 13 Tape and Reel Specification 14

R00E

Specifications

Package Pinout

LED + 2

LED - 3
8 C+ 7 OUTPUT 6 OUTPUT 5 C-

CPC1560

Pin Description

Pin# Name

NC Not connected

LED + Positive input to LED

LED - Negative input to LED

NC Not connected

C- External Capacitor, Negative Terminal
6 OUTPUT Switch Output
7 OUTPUT Switch Output

C+ External Capacitor, Positive Terminal

Absolute Maximum Ratings

Parameter

Rating 60 5

Units VP V
160 V/us

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CPC1560GSTR Datasheet file may be downloaded here without warranties.

Datasheet ID: CPC1560GSTR 644111