IAD112NTR

IAD112NTR Datasheet

IAD112N

Part	Datasheet
IAD112NTR	IAD112NTR (pdf)

Related Parts	Information
IAD112N	IAD112N

PDF Datasheet Preview
IAD112N Integrated Telecom Circuits Load Voltage Load Current Max RON IAD112N 350 100 35 Units V Features • 16 Pin Narrow SOIC Package • Three Functions in One Package • Bi-Directional Current Sensing • Bi-Directional Current Switching • 3750VRMS Input/Output Isolation • FCC Compatible • No EMI/RFI Generation • Machine Insertable, Wave Solderable • Tape & Reel Versions Available • Telecommunications • Telecom Switching • Tip/Ring Circuits • Modem Switching Laptop, Notebook, Pocket Size • Hookswitch • Dial Pulsing • Ground Start • Ringer Injection • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters Watt-Hour, Water, Gas • Medical Equipment-Patient/Equipment Isolation • Security • Aerospace • Industrial Controls Description The IAD112N Multifunction Telecom switch combines a 350V Form A relay and two optocouplers in a single package. The relay uses optically coupled MOSFET technology to provide 1500V of input to output isolation. The efficient MOSFET switch and photovoltaic die use Clare’s patented OptoMOS architecture. The optically coupled input uses highly efficient GaAIAs infrared LEDs. IAD112N’s allow telecom circuit designers to combine three discrete functions in a single component. The IAD112N’s small package uses less space than traditional discrete component solutions. Approvals • UL Recognized File Number E76270 • CSA Certified File Number LR 43639-12 • VDE Compatible • BSI Certified: • BS EN 60950:1992 BS7002:1992 Certificate #:7969 • BS EN 41003:1993 Certificate #:7969 Ordering Information Part # IAD112N Description 16 Pin SOIC Narrow 50/Tube 16 Pin SOIC Narrow 1000/Reel Pin Configuration Switching Characteristics of Normally Open Form A Devices CONTROL 10ms Switching Characteristics of Normally Closed Form B Devices CONTROL 10ms +90% LOAD 10%+ 10%+ TON TOFF +90% +10% TOFF +90% TON DS-IAD112N-R2 IAD112N Absolute Maximum Ratings C Parameter Total Package Dissipation Isolation Voltage Input to Output Operational Temperature Storage Temperature Soldering Temperature 10 Seconds Max. 1 Above derate linerity Min Typ Max Units - 11 W 3750 -40 -40 - - VRMS - +85 °C - +125 °C - +220 °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Electrical Characteristics Parameter Conditions Symbol Min Relay Portion Output Characteristics 25°C Load Voltage Peak IL= 1µA Load Current Continuous Peak Load Current 10ms ILPK

PDF Datasheet Preview

IAD112N

Integrated Telecom Circuits

Load Voltage Load Current Max RON

IAD112N 350 100 35

Units V

Features
• 16 Pin Narrow SOIC Package
• Three Functions in One Package
• Bi-Directional Current Sensing
• Bi-Directional Current Switching
• 3750VRMS Input/Output Isolation
• FCC Compatible
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
• Tape & Reel Versions Available
• Telecommunications
• Telecom Switching
• Tip/Ring Circuits
• Modem Switching Laptop, Notebook, Pocket Size
• Hookswitch
• Dial Pulsing
• Ground Start
• Ringer Injection
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters Watt-Hour, Water, Gas
• Medical Equipment-Patient/Equipment Isolation
• Security
• Aerospace
• Industrial Controls

Description The IAD112N Multifunction Telecom switch combines a 350V Form A relay and two optocouplers in a single package. The relay uses optically coupled MOSFET technology to provide 1500V of input to output isolation. The efficient MOSFET switch and photovoltaic die use Clare’s patented OptoMOS architecture. The optically coupled input uses highly efficient GaAIAs infrared LEDs. IAD112N’s allow telecom circuit designers to combine three discrete functions in a single component. The IAD112N’s small package uses less space than traditional discrete component solutions.

Approvals
• UL Recognized File Number E76270
• CSA Certified File Number LR 43639-12
• VDE Compatible
• BSI Certified:
• BS EN 60950:1992 BS7002:1992 Certificate #:7969
• BS EN 41003:1993 Certificate #:7969
Ordering Information

Part # IAD112N

Description 16 Pin SOIC Narrow 50/Tube 16 Pin SOIC Narrow 1000/Reel

Pin Configuration

Switching Characteristics of Normally Open Form A Devices

CONTROL
10ms

Switching Characteristics of Normally Closed Form B Devices

CONTROL
10ms
+90% LOAD 10%+
10%+

TON TOFF
+90% +10% TOFF
+90% TON

DS-IAD112N-R2

IAD112N

Absolute Maximum Ratings C

Parameter Total Package Dissipation Isolation Voltage

Input to Output Operational Temperature Storage Temperature Soldering Temperature
10 Seconds Max.
1 Above derate linerity

Min Typ Max Units
- 11 W
3750 -40 -40 -
- VRMS
- +85 °C
- +125 °C
- +220 °C

Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability.

Electrical Characteristics

Parameter

Conditions

Symbol Min

Relay Portion Output Characteristics 25°C

Load Voltage Peak

IL= 1µA

Load Current Continuous

Peak Load Current
10ms

ILPK

More datasheets: 9110-24-S | 9110-12 RED | 9110-12 BLK | 9110-36 BLK | 9110-24 BLK | 9110-24 RED | 9110-36 RED | ACC024 | MV8032A4R0 | IAD112N

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived IAD112NTR Datasheet file may be downloaded here without warranties.

Datasheet ID: IAD112NTR 523323