CPC5611A
CPC5611A Datasheet
CPC5610/CPC5611
| Part | Datasheet |
|---|---|
CPC5611A |
CPC5611A (pdf) |
| Related Parts | Information |
|---|---|
CPC5610A |
CPC5610A |
CPC5611ATR |
CPC5611ATR |
CPC5610ATR |
CPC5610ATR |
| PDF Datasheet Preview |
|---|
| CPC5610/CPC5611 LITELINK II Silicon Data Access Arrangement DAA IC • Full-duplex data and voice transmission • Transformerless telephone line isolation interface • Operates at all modem speeds, including V.90 56K • or 5 V power supply operation • Half-wave ring detector CPC5610 or full-wave ring detector CPC5611 • Caller ID signal reception • Small 32-pin SOIC plastic package • Printed-circuit board space and cost savings • Meets PC Card PCMCIA height requirements • Easy interface with modem ICs and voice CODECs • Worldwide dial-up telephone network compatibility • Supplied application circuit complies with the requirements of TIA/EIA/IS-968 FCC part 68 , UL1950, UL60950, EN60950, IEC60950, EN55022B, CISPR22B, EN55024, and TBR-21 • CPC5610 and CPC5611 comply with UL1577 • TTL compatible logic inputs and outputs • Line-side circuit powered from telephone line • Satellite and cable set-top boxes • V.90 and other standard modems • Fax machines • Voicemail systems • Computer telephony • PBXs • Telephony gateways • Embedded modems for such applications as POS terminals, automated banking, remote metering, vending machines, security, and surveillance Clare CPC5610 and CPC5611 LITELINKs are silicon data access arrangement DAA ICs used in data and voice communication applications to make connections to the public switched telephone network PSTN . LITELINK uses on-chip optical components and a few inexpensive external components to form a complete voice or high-speed data telephone line interface. LITELINK eliminates the need for the large isolation transformers or capacitors as used in other DAA configurations. It incorporates the required high-voltage isolation barrier in the surface-mount SOIC package. The CPC5610 half-wave ring detect and CPC5611 full-wave ring detect build upon Clare’s existing LITELINK line, with improved performance and V operation. Ordering Information Part Number CPC5610A CPC5610ATR CPC5611A CPC5611ATR 32-pin surface mount DAA with half-wave ring detect, tubed 32-pin surface mount DAA with half-wave ring detect, tape and reel 32-pin surface mount DAA with full-wave ring detect, tubed 32-pin surface mount DAA with full-wave ring detect, tape and reel Figure CPC5610/CPC5611 Block Diagram Isolation Barrier Transmit Isolation Amplifier Transmit Diff. Amplifier Transconductance Stage 2-4 Wire Hybrid AC/DC Termination Hookswitch OH RING Rx+ Rx- Vref AGC Receive Diff. Amplifier CID/ RING MUX Snoop Amplifier Vref AGC Receive Isolation Amplifier CSNOOP RSNOOP TIP+ VI Slope Control AC Impedance Control Current Limit Control RING- DS-CPC5610/5611-R9.0 CPC5610/CPC5611 1 Electrical Specifications. 3 Absolute Maximum Ratings. 3 Performance 3 Pin Description 5 2 Application Circuits 6 Resistive Termination Application Circuit 6 Resistive Termination Application Circuit Part List 7 Reactive Termination Application Circuit. 8 Reactive Termination Application Circuit Part List 9 4 Regulatory Information 13 5 LITELINK Design Resources 14 Clare, Inc. Design Resources 14 Third Party Design Resources. 14 6 LITELINK Performance 15 7 Manufacturing Information. 17 Mechanical Dimensions. 17 Tape and Reel Packaging 18 Soldering 18 Moisture Reflow Sensitivity 18 Reflow Profile 18 Washing. 18 R9.0 Electrical Specifications CPC5610/CPC5611 Absolute Maximum Ratings Parameter |
| More datasheets: FQPF2NA90 | 10314-C500-00 | 10380-C500-00 | 10326-C500-00 | 10336-C500-00 | 10340-C500-00 | 10368-C500-00 | 103A0-C500-00 | 10350-C500-00 | 3001R-97X-0001 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CPC5611A Datasheet file may be downloaded here without warranties.