TS112NTR

TS112NTR Datasheet


TS112N

Part Datasheet
TS112NTR TS112NTR TS112NTR (pdf)
Related Parts Information
TS112N TS112N TS112N
PDF Datasheet Preview
TS112N

Multifunction Telecom Switch

Load Voltage Load Current Max RON

TS112N 350 120 20

Units V

Features
• Small 8 Pin SOIC Narrow Package
• Low Drive Power Requirements TTL/CMOS

Compatible
• No Moving Parts
• High Reliability
• Arc-Free With No Snubbing Circuits
• 1500VRMS Input/Output Isolation
• FCC Compatible
• VDE Compatible
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
• Tape & Reel Version Available

Description The TS112 Multifunction Telecom switch combines a 350V Form A relay and an optocoupler in a single package. The relay uses optically coupled MOSFET technology to provide 1500V of input to output isolation. The efficient MOSFET switch and photovoltaic die use Clare’s patented OptoMOS architecture. The optically coupled input uses highly efficient GaAIAs infrared LEDs. TS112N allows telecom circuit designers to combine two discrete functions, such as hook switch and ring detect, in a single component. The TS112’s small package uses less space than traditional discrete component solutions.

Approvals
• UL Recognized File Number Pending
• CSA Certified File Number Pending
• BSI Certified Pending
• Telecommunications
• Telecom Switching
• Tip/Ring Circuits
• Modem Switching Laptop, Notebook, Pocket Size
• Hookswitch
• Dial Pulsing
• Ground Start
• Ringer Injection
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters Watt-Hour, Water, Gas
• Medical Equipment-Patient/Equipment Isolation
• Security
• Aerospace
• Industrial Controls
Ordering Information

Part # TS112N TS112NTR

Description 8 Pin SOIC 50/Tube 8 Pin SOIC Tape & Reel 1000/Reel

Pin Configuration

TS112 Pinout
1 + LED - Relay
2 LED - Relay
3 Collector - Phototransistor
4 Emitter - Phototransistor
8 Load - Relay MOSFET Output
7 Load - Relay MOSFET Output
6 LED - Phototransistor
5 LED - Phototransistor

DS-TS112N-R2

TS112N

Absolute Maximum Ratings C

Parameter Input Power Dissipation Input Control Current

Input to Output Operational Temperature Storage Temperature Soldering Temperature
10 Seconds Max.
1 Derate Linearly 2 Derate Linearly

Min Typ Max Units
- 1501 mW
- 100 mA
- 8002 mW
1500 -40 -40
- VRMS
- +85 °C
- +125 °C
+220 °C

Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability.

Electrical Characteristics

Parameter

Conditions

Symbol Min

Relay Portion Pins 7, 8 Output Characteristics 25°C

Load Voltage Peak

Load Current Continuous

Peak Load Current
10ms

ILPK

On-Resistance
More datasheets: B39212B7750C810 | 43-01185 | 43-01183 | 43-01182 | 43-01184 | ISOCON-6 | 400399 | 3016 | 1-NPO/603-1334 | TS112N


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived TS112NTR Datasheet file may be downloaded here without warranties.

Datasheet ID: TS112NTR 505867