MJSB-10SS

MJSB-10SS Datasheet

MJS

Part	Datasheet
MJSB-10SS	MJSB-10SS (pdf)

Related Parts	Information
MJSB-10PH003	MJSB-10PH003

PDF Datasheet Preview
Miro Center Jackscrew The MJS jackscrew series provides a reliable interconnect for board-to-board, board-to-cable and in-line cable-to-cable applications. Layouts accommodating up to 76 MICROPIN/MICROSOCKET contacts are available, with the same wide range of options as are offered with the other MICRO Line products offered in this catalog. How to Order SERIES INSULATOR MATERIAL CONTACT ARRANGEMENT CONTACT TYPE TERMINATION TYPE TERMINATION CODES MJS * - 26 P H 001 SERIES MJS - Micro Center Jackscrew INSULATOR MATERIAL B - Diallyl phthalate V - Polyester U - Polyetherimide R - Polyphenylene sulfide CONTACT ARRANGEMENTS Unshrounded Receptacle 10, 26, 51, 66 Shrouded Receptacle 10, 34, 42, 76 Low Profile Plug and Receptacle shrouded 28 CONTACT TYPE P - Pin S - Socket TERMINATION TYPE H - Insulated wire harness. I - Integral tail MJSV-28S only . L - Solid - uninsulated wire. S - Solder pot to accept #26 AWG harness wire. T - Thru bundle pigtail MJSV-28P only . Standard Wire Termination Codes TERMINATION CODE* H 001 - 18" , 7/34 strand, #26 AWG, MIL-W-16878/4, Type E Teflon, yellow. H 003 - 18", 7/34 strand, #26 AWG, MIL-W-16878/4, Type E Teflon, color coded to MIL-STD-681 System I. - 1/2" uninsulated solid #25 AWG gold plated copper. - 1" uninsulated solid #25 AWG gold plated copper. * See Termination Codes shown below for additional length modfication codes. The following termination codes are listed for you information. For lengths not shown, consult factory for proper modification code. All wire lengths are minimum. Harness Type H #26 AWG per MIL-W-16878/4 Type E Teflon, 7/34 stranded. Length All Yellow Color Coded H 020 H 027 H 019 H 016 H 026 H 034 H 029 H 025 H 028

PDF Datasheet Preview

Miro Center Jackscrew

The MJS jackscrew series provides a reliable interconnect for board-to-board, board-to-cable and in-line cable-to-cable applications. Layouts accommodating up to 76 MICROPIN/MICROSOCKET
contacts are available, with the same wide range of options as are offered with the other MICRO Line products offered in this catalog.

How to Order

SERIES INSULATOR MATERIAL CONTACT ARRANGEMENT CONTACT TYPE TERMINATION TYPE TERMINATION CODES

MJS * - 26 P H 001

SERIES MJS - Micro Center Jackscrew

INSULATOR MATERIAL B - Diallyl phthalate V - Polyester U - Polyetherimide R - Polyphenylene sulfide

CONTACT ARRANGEMENTS Unshrounded Receptacle 10, 26, 51, 66 Shrouded Receptacle 10, 34, 42, 76 Low Profile Plug and Receptacle shrouded 28

CONTACT TYPE P - Pin S - Socket

TERMINATION TYPE H - Insulated wire harness. I - Integral tail MJSV-28S only . L - Solid - uninsulated wire. S - Solder pot to accept #26 AWG harness wire. T - Thru bundle pigtail MJSV-28P only .

Standard Wire Termination Codes

TERMINATION CODE*

H 001
- 18" , 7/34 strand, #26 AWG,

MIL-W-16878/4, Type E Teflon,
yellow.

H 003
- 18", 7/34 strand, #26 AWG,

MIL-W-16878/4, Type E Teflon,
color coded to MIL-STD-681

System I.
- 1/2" uninsulated solid #25

AWG gold plated copper.
- 1" uninsulated solid #25 AWG
gold plated copper.
* See Termination Codes shown below for additional length modfication codes.

The following termination codes are listed for you information. For lengths not shown, consult factory for proper modification code. All wire lengths are minimum.

Harness Type H #26 AWG per MIL-W-16878/4 Type E Teflon, 7/34 stranded.

Length

All Yellow

Color Coded

H 020

H 027

H 019

H 016

H 026

H 034

H 029

H 025

H 028

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MJSB-10SS Datasheet file may be downloaded here without warranties.

Datasheet ID: MJSB-10SS 644035