CA3102R20A9PXF183

CA3102R20A9PXF183 Datasheet

Datasheet for part number CA3102R20A9PXF183

Part	Datasheet
CA3102R20A9PXF183	CA3102R20A9PXF183 (pdf)

PDF Datasheet Preview
Datasheet for part number CA3102R20A9PXF183 Our Catalog Part Number CA3102R20A9PX-F183 Our Global Manufacturing Part Number 121001-0744AXR Brand Cannon Product Category Circular Product Line MIL-DTL 5015 Series I Series MIL-C-5015 Product Datasheet Thread Shell Style Gender Shell Size Contact Arrangement Number of contacts Contact Type Contact Plating Shielding Insulator Rotation Contact Rating at +20 °C 68 °F Size 25/12 Contact Resistance Size 25/12 Operating Voltage Insulator Resistance Test Voltage Air and Creepage Paths Min Ambient Temperature Safety Provisions Salt Spray Resistance Mating Cycles Sep. Force per Contact Size 25/12 Gage Coupling Torque Contact Retention Size 25/12 Shell Material Shell Plating Insulator and Gromet Material Contact Material Harnessing Info Contact Cross-Section Harnessing Info Insulator Diameter Wire Stripping Size 25/12 General Info Connector with threaded coupling Box mounting receptacle Pin 20 20A9 9 contacts size 12 Solder Cup Hard silver no 110° 3 mΩ In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC Acc. To VG95319, part 2, test no. and VG95210, part 32, test conditions B, standard insulator material > 1000 MΩ 2500 Vrms 2,8 mm Standard insulator material -55°/+125°C -67/257°F IP67 acc. to DIN 40 050 1 bar pressure after 12 hrs 500 hours salt spray resistant 500 min 1,5 N For infos on Gage please see catalog VG95234, part 1 Closing 9 Nm max / Opening 0,7 Nm min 55 N Aluminium alloy Olive drab chromate coating over cadmium plating Neoprene Copper alloy See assembly instruction See assembly instruction 6,2 mm All tests in accordance with VG95319 and/or if applicable with VG95210 Specifications and dimensions subject to change.

PDF Datasheet Preview

Datasheet for part number CA3102R20A9PXF183

Our Catalog Part Number CA3102R20A9PX-F183 Our Global Manufacturing Part Number 121001-0744AXR Brand Cannon Product Category Circular Product Line MIL-DTL 5015 Series I Series MIL-C-5015

Product Datasheet Thread Shell Style Gender Shell Size Contact Arrangement Number of contacts Contact Type Contact Plating Shielding Insulator Rotation Contact Rating at +20 °C 68 °F Size 25/12 Contact Resistance Size 25/12

Operating Voltage

Insulator Resistance

Test Voltage Air and Creepage Paths Min

Ambient Temperature

Safety Provisions

Salt Spray Resistance Mating Cycles Sep. Force per Contact Size 25/12

Gage

Coupling Torque Contact Retention Size 25/12 Shell Material Shell Plating Insulator and Gromet Material Contact Material Harnessing Info Contact Cross-Section

Harnessing Info Insulator Diameter Wire Stripping Size 25/12

General Info

Connector with threaded coupling Box mounting receptacle Pin 20 20A9 9 contacts size 12 Solder Cup Hard silver no 110°
3 mΩ In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC Acc. To VG95319, part 2, test no. and VG95210, part 32, test conditions B, standard insulator material > 1000 MΩ 2500 Vrms 2,8 mm Standard insulator material -55°/+125°C -67/257°F IP67 acc. to DIN 40 050 1 bar pressure after 12 hrs 500 hours salt spray resistant 500 min 1,5 N For infos on Gage please see catalog VG95234, part 1 Closing 9 Nm max / Opening 0,7 Nm min 55 N Aluminium alloy Olive drab chromate coating over cadmium plating Neoprene Copper alloy

See assembly instruction

See assembly instruction
6,2 mm All tests in accordance with VG95319 and/or if applicable with VG95210

Specifications and dimensions subject to change.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CA3102R20A9PXF183 Datasheet file may be downloaded here without warranties.

Datasheet ID: CA3102R20A9PXF183 639874