CA3102R20-2SF80

CA3102R20-2SF80 Datasheet

Datasheet for part number CA3102R20-2SF80

Part	Datasheet
CA3102R20-2SF80	CA3102R20-2SF80 (pdf)

PDF Datasheet Preview
Datasheet for part number CA3102R20-2SF80 Our Catalog Part Number CA3102R20-2S-F80 Brand Cannon Product Category Circular Product Line MIL-DTL 5015 Series I Series MIL-C-5015 Product Datasheet Thread Shell Style Gender Shell Size Contact Arrangement Number of contacts Contact Type Contact Plating Shielding Contact Rating at +20 °C 68 °F Size 500/0 Contact Resistance Size 500/0 Operating Voltage Insulator Resistance Test Voltage Air and Creepage Paths Min Ambient Temperature Safety Provisions Salt Spray Resistance Mating Cycles Sep. Force per Contact Size 500/0 Gage Coupling Torque Contact Retention Size 500/0 Shell Material Shell Plating Insulator and Gromet Material Contact Material Harnessing Info Contact Cross-Section Harnessing Info Insulator Diameter Wire Stripping Size 500/0 General Info Connector with threaded coupling Box mounting receptacle Socket 20-2 1 contact size 0 AWG Crimp Hard silver no 245 A 0,2 mΩ In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC Acc. To VG95319, part 2, test no. and VG95210, part 32, test conditions B, standard insulator material > 1000 MΩ 2500 Vrms 2,8 mm Standard insulator material -55°/+125°C -67/257°F IP67 acc. to DIN 40 050 1 bar pressure after 12 hrs 500 hours salt spray resistant 500 min 8,5 N For infos on Gage please see catalog VG95234, part 1 Closing 9 Nm max / Opening 0,7 Nm min 95 N Aluminium alloy Olive drab chromate coating over cadmium plating Neoprene Copper alloy See assembly instruction See assembly instruction 13,7 mm All tests in accordance with VG95319 and/or if applicable with VG95210 Specifications and dimensions subject to change.

PDF Datasheet Preview

Datasheet for part number CA3102R20-2SF80

Our Catalog Part Number CA3102R20-2S-F80 Brand Cannon Product Category Circular Product Line MIL-DTL 5015 Series I Series MIL-C-5015

Product Datasheet Thread Shell Style Gender Shell Size Contact Arrangement Number of contacts Contact Type Contact Plating Shielding Contact Rating at +20 °C 68 °F Size 500/0 Contact Resistance Size 500/0

Operating Voltage

Insulator Resistance

Test Voltage Air and Creepage Paths Min

Ambient Temperature

Safety Provisions

Salt Spray Resistance Mating Cycles Sep. Force per Contact Size 500/0

Gage

Coupling Torque Contact Retention Size 500/0 Shell Material Shell Plating Insulator and Gromet Material Contact Material Harnessing Info Contact Cross-Section

Harnessing Info Insulator Diameter Wire Stripping Size 500/0

General Info

Connector with threaded coupling Box mounting receptacle Socket 20-2 1 contact size 0 AWG Crimp Hard silver no
245 A
0,2 mΩ In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC Acc. To VG95319, part 2, test no. and VG95210, part 32, test conditions B, standard insulator material > 1000 MΩ 2500 Vrms 2,8 mm Standard insulator material -55°/+125°C -67/257°F IP67 acc. to DIN 40 050 1 bar pressure after 12 hrs 500 hours salt spray resistant 500 min 8,5 N For infos on Gage please see catalog VG95234, part 1 Closing 9 Nm max / Opening 0,7 Nm min 95 N Aluminium alloy Olive drab chromate coating over cadmium plating Neoprene Copper alloy

See assembly instruction

See assembly instruction
13,7 mm All tests in accordance with VG95319 and/or if applicable with VG95210

Specifications and dimensions subject to change.

More datasheets: 95736-106LF | 95736-116 | 95736-402 | 95736-110 | 95736-406LF | 95736-406 | 95736-111LF | 95736-412 | 95736-404 | 50470

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CA3102R20-2SF80 Datasheet file may be downloaded here without warranties.

Datasheet ID: CA3102R20-2SF80 639844