CA07A32A69PBF80

CA07A32A69PBF80 Datasheet

Datasheet for part number CA07A32A69PBF80

Part	Datasheet
CA07A32A69PBF80	CA07A32A69PBF80 (pdf)

PDF Datasheet Preview
Datasheet for part number CA07A32A69PBF80 Our Catalog Part Number CA07A32A69P-B-F80 Brand Cannon Product Category Circular Product Line CA Bayonet Series CA BAYONET Product Datasheet Bayonet Shell Style Gender Shell Size Contact Arrangement Number of contacts Contact Type Contact Plating Contacts installed Shielding Contact Rating at +20 °C 68 °F Size 10/20 Contact Rating at +20 °C 68 °F Size 15/15S/16/16S Contact Resistance Size 10/20 Contact Resistance Size 15/15S/16/16S Operating Voltage Insulator Resistance Test Voltage Air and Creepage Paths Min Ambient Temperature Safety Provisions Salt Spray Resistance Mating Cycles Sep. Force per Contact Size 10/20 Sep. Force per Contact Size 15/15S/16/16S Gage Coupling Torque Contact Retention Size 10/20 Contact Retention Size 15/15S/16/16S Shell Material Shell Plating Insulator and Grommet Material Contact Material Harnessing Info Contact Cross-Section Harnessing Info Insulator Diameter Wire Stripping Size 10/20 Specifications and dimensions subject to change. Connector with bayonet coupling Jam nut receptacle Pin 32 32A69 20 contacts size 16, 41 contacts size 20 AWG Crimp Hard silver not assembled, packed separately no 12 mΩ 6 mΩ In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC Acc. To VG95319, part 2, test no. and VG95210, part 32, test conditions B, standard insulator material > 1000 MΩ 1050 Vrms 0,7 mm Standard insulator material -55°/+125°C -67/257°F IP67 and IP68 1 bar pressure after 12 hrs acc. to DIN 40 050 500 hours salt spray resistant 500 min 0,3 N 1,0 N For infos on Gage please see catalog VG95234, part 1 Closing 19 Nm max / Opening 1,03 Nm min 30 N Aluminium alloy Olive drab chromate over cadmium plating conductive CR-Elastomere Copper alloy See assembly instruction See assembly instruction Datasheet for part number CA07A32A69PBF80 Our Catalog Part Number CA07A32A69P-B-F80 Brand Cannon Product Category Circular Product Line CA Bayonet Series CA BAYONET Product Datasheet Wire Stripping Size 15/15S/16/16S General Info 6,2 mm All tests in accordance with VG95319 and/or if applicable with VG95210 Specifications and dimensions subject to change.

PDF Datasheet Preview

Datasheet for part number CA07A32A69PBF80

Our Catalog Part Number CA07A32A69P-B-F80 Brand Cannon Product Category Circular Product Line CA Bayonet Series CA BAYONET

Product Datasheet Bayonet Shell Style Gender Shell Size Contact Arrangement Number of contacts Contact Type Contact Plating Contacts installed Shielding Contact Rating at +20 °C 68 °F Size 10/20 Contact Rating at +20 °C 68 °F Size 15/15S/16/16S Contact Resistance Size 10/20 Contact Resistance Size 15/15S/16/16S

Operating Voltage

Insulator Resistance

Test Voltage Air and Creepage Paths Min

Ambient Temperature

Safety Provisions

Salt Spray Resistance Mating Cycles Sep. Force per Contact Size 10/20 Sep. Force per Contact Size 15/15S/16/16S

Gage

Coupling Torque Contact Retention Size 10/20 Contact Retention Size 15/15S/16/16S Shell Material

Shell Plating

Insulator and Grommet Material Contact Material

Harnessing Info Contact Cross-Section

Harnessing Info Insulator Diameter

Wire Stripping Size 10/20

Specifications and dimensions subject to change.

Connector with bayonet coupling Jam nut receptacle Pin 32 32A69 20 contacts size 16, 41 contacts size 20 AWG Crimp Hard silver not assembled, packed separately no
12 mΩ
6 mΩ

In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC Acc. To VG95319, part 2, test no. and VG95210, part 32, test conditions B, standard insulator material > 1000 MΩ 1050 Vrms 0,7 mm Standard insulator material -55°/+125°C -67/257°F IP67 and IP68 1 bar pressure after 12 hrs acc. to DIN 40 050 500 hours salt spray resistant 500 min 0,3 N
1,0 N

For infos on Gage please see catalog VG95234, part 1 Closing 19 Nm max / Opening 1,03 Nm min 30 N

Aluminium alloy Olive drab chromate over cadmium plating conductive CR-Elastomere Copper alloy

See assembly instruction

See assembly instruction

Datasheet for part number CA07A32A69PBF80

Our Catalog Part Number CA07A32A69P-B-F80 Brand Cannon Product Category Circular Product Line CA Bayonet Series CA BAYONET

Product Datasheet Wire Stripping Size 15/15S/16/16S

General Info
6,2 mm

All tests in accordance with VG95319 and/or if applicable with VG95210

Specifications and dimensions subject to change.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CA07A32A69PBF80 Datasheet file may be downloaded here without warranties.

Datasheet ID: CA07A32A69PBF80 639522