CA07A20-4PWB

CA07A20-4PWB Datasheet

Datasheet for part number CA07A20-4PWB

Part	Datasheet
CA07A20-4PWB	CA07A20-4PWB (pdf)

PDF Datasheet Preview
Datasheet for part number CA07A20-4PWB Our Catalog Part Number CA07A20-4PWB Brand Cannon Product Category Circular Product Line CA Bayonet Series CA BAYONET Product Datasheet Bayonet Shell Style Gender Shell Size Contact Arrangement Number of contacts Contact Type Contact Plating Contacts installed Shielding Insulator Rotation Contact Rating at +20 °C 68 °F Size 25/12 Contact Resistance Size 25/12 Operating Voltage Insulator Resistance Test Voltage Air and Creepage Paths Min Ambient Temperature Safety Provisions Salt Spray Resistance Mating Cycles Sep. Force per Contact Size 25/12 Gage Coupling Torque Contact Retention Size 25/12 Shell Material Shell Plating Insulator and Grommet Material Contact Material Harnessing Info Contact Cross-Section Harnessing Info Insulator Diameter Wire Stripping Size 25/12 General Info Connector with bayonet coupling Jam nut receptacle Pin 20-4 contacts size 12 Solder Cup Hard silver yes no 45° 3 mΩ In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC Acc. To VG95319, part 2, test no. and VG95210, part 32, test conditions B, standard insulator material > 1000 MΩ 2500 Vrms 2,8 mm Standard insulator material -55°/+125°C -67/257°F IP67 and IP68 1 bar pressure after 12 hrs acc. to DIN 40 050 500 hours salt spray resistant 500 min 1,5 N For infos on Gage please see catalog VG95234, part 1 Closing 9 Nm max / Opening 0,7 Nm min 55 N Aluminium alloy Olive drab chromate over cadmium plating conductive CR-Elastomere Copper alloy See assembly instruction See assembly instruction 6,2 mm All tests in accordance with VG95319 and/or if applicable with VG95210 Specifications and dimensions subject to change.

PDF Datasheet Preview

Datasheet for part number CA07A20-4PWB

Our Catalog Part Number CA07A20-4PWB Brand Cannon Product Category Circular Product Line CA Bayonet Series CA BAYONET

Product Datasheet Bayonet Shell Style Gender Shell Size Contact Arrangement Number of contacts Contact Type Contact Plating Contacts installed Shielding Insulator Rotation Contact Rating at +20 °C 68 °F Size 25/12 Contact Resistance Size 25/12

Operating Voltage

Insulator Resistance

Test Voltage Air and Creepage Paths Min

Ambient Temperature

Safety Provisions

Salt Spray Resistance Mating Cycles Sep. Force per Contact Size 25/12

Gage

Coupling Torque Contact Retention Size 25/12 Shell Material

Shell Plating

Insulator and Grommet Material Contact Material Harnessing Info Contact Cross-Section

Harnessing Info Insulator Diameter Wire Stripping Size 25/12

General Info

Connector with bayonet coupling Jam nut receptacle Pin 20-4 contacts size 12 Solder Cup Hard silver yes no 45°
3 mΩ In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC Acc. To VG95319, part 2, test no. and VG95210, part 32, test conditions B, standard insulator material > 1000 MΩ 2500 Vrms 2,8 mm Standard insulator material -55°/+125°C -67/257°F IP67 and IP68 1 bar pressure after 12 hrs acc. to DIN 40 050 500 hours salt spray resistant 500 min 1,5 N For infos on Gage please see catalog VG95234, part 1 Closing 9 Nm max / Opening 0,7 Nm min 55 N Aluminium alloy Olive drab chromate over cadmium plating conductive CR-Elastomere Copper alloy

See assembly instruction

See assembly instruction
6,2 mm All tests in accordance with VG95319 and/or if applicable with VG95210

Specifications and dimensions subject to change.

More datasheets: 6N135S | 6N136M | 6N135M | 6N136S-TA1 | 6N136S | 6N136 | 6N135 | 6N135S-TA1 | C1206C475K5PACTU | DDMM50SEA101

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CA07A20-4PWB Datasheet file may be downloaded here without warranties.

Datasheet ID: CA07A20-4PWB 639494