CA06EW14S-6SB02

CA06EW14S-6SB02 Datasheet

Datasheet for part number CA06EW14S-6SB02

Part	Datasheet
CA06EW14S-6SB02	CA06EW14S-6SB02 (pdf)

PDF Datasheet Preview
Datasheet for part number CA06EW14S-6SB02 Our Catalog Part Number CA06EW14S-6S-B-02 Brand Cannon Product Category Circular Product Line CA Bayonet Series CA BAYONET Product Datasheet Bayonet Shell Style Endbell Style Gender Shell Size Contact Arrangement Number of contacts Contact Type Contact Plating Shielding Contact Rating at +20 °C 68 °F Size 15/15S/16/16S Contact Resistance Size 15/15S/16/16S Operating Voltage Insulator Resistance Test Voltage Air and Creepage Paths Min Ambient Temperature Safety Provisions Salt Spray Resistance Mating Cycles Sep. Force per Contact Size 15/15S/16/16S Gage Coupling Torque Contact Retention Size 15/15S/16/16S Shell Material Shell Plating Insulator and Gromet Material Contact Material Harnessing Info Contact Cross-Section Harnessing Info Insulator Diameter Wire Stripping Size 15/15S/16/16S General Info Specifications and dimensions subject to change. Connector with bayonet coupling Plug, straight Connector with spring washer, endbell for heatshrink with cable clamp and bushing Socket 14S-6 contacts size 16S AWG Crimp Hard silver no 6 mΩ In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC Acc. To VG95319, part 2, test no. and VG95210, part 32, test conditions B, standard insulator material > 1000 MΩ 1050 Vrms 0,7 mm Standard insulator material -55°/+125°C -67/257°F IP67 acc. to DIN 40 050 1 bar pressure after 12 hrs 500 hours salt spray resistant 500 min 1,0 N For infos on Gage please see catalog VG95234, part 1 Closing 3,6 Nm max / Opening 0,35 Nm min Aluminium alloy Olive drab chromate over cadmium plating CR-Elastomere Copper alloy See assembly instruction See assembly instruction 6,2 mm All tests in accordance with VG95319 and/or if applicable with VG95210

PDF Datasheet Preview

Datasheet for part number CA06EW14S-6SB02

Our Catalog Part Number CA06EW14S-6S-B-02 Brand Cannon Product Category Circular Product Line CA Bayonet Series CA BAYONET

Product Datasheet Bayonet Shell Style Endbell Style Gender Shell Size Contact Arrangement Number of contacts Contact Type Contact Plating Shielding Contact Rating at +20 °C 68 °F Size 15/15S/16/16S Contact Resistance Size 15/15S/16/16S

Operating Voltage

Insulator Resistance

Test Voltage Air and Creepage Paths Min Ambient Temperature

Safety Provisions Salt Spray Resistance Mating Cycles Sep. Force per Contact Size 15/15S/16/16S Gage Coupling Torque Contact Retention Size 15/15S/16/16S Shell Material Shell Plating Insulator and Gromet Material Contact Material Harnessing Info Contact Cross-Section

Harnessing Info Insulator Diameter Wire Stripping Size 15/15S/16/16S General Info

Specifications and dimensions subject to change.

Connector with bayonet coupling Plug, straight Connector with spring washer, endbell for heatshrink with cable clamp and bushing Socket 14S-6 contacts size 16S AWG Crimp Hard silver no
6 mΩ

In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC Acc. To VG95319, part 2, test no. and VG95210, part 32, test conditions B, standard insulator material > 1000 MΩ 1050 Vrms 0,7 mm Standard insulator material -55°/+125°C -67/257°F IP67 acc. to DIN 40 050 1 bar pressure after 12 hrs 500 hours salt spray resistant 500 min
1,0 N

For infos on Gage please see catalog VG95234, part 1 Closing 3,6 Nm max / Opening 0,35 Nm min

Aluminium alloy Olive drab chromate over cadmium plating CR-Elastomere Copper alloy See assembly instruction

See assembly instruction
6,2 mm

All tests in accordance with VG95319 and/or if applicable with VG95210

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CA06EW14S-6SB02 Datasheet file may be downloaded here without warranties.

Datasheet ID: CA06EW14S-6SB02 639458