D20418-102

D20418-102 Datasheet

D20418-2

Part	Datasheet
D20418-102	D20418-102 (pdf)

Related Parts	Information
D20418-77	D20418-77

PDF Datasheet Preview
Accessories - Locking Hardware Screw Locks Insures positive mating. Used for vibration applications. Front Panel Mount D SUBMINIATURE CONNECTOR, PIN OR SOCKET MOUNTING PANEL SCREW CLIP WITH THREAD Rear Panel Mount NUT WASHER LOCK WASHER HEX NUT Female Srew Locks Order 2 per connector. Cadmium With Yellow Chromate M24308 MIL-Spec. D20418-2 M24308/26-1 D20418-50 D20418-39 M24308/26-2 D20418-74 NM For Use With Non-Magnetic/No-Dutgas Products Brass Stainless Steel D20418-52 D20418-14 D20418-102 D20418-101 D20418 -77 Male Srew Locks +_ +_ +_ +_ #4-40 NC-2B THD. APPROX. REMOVE ONE WASHER FOR EACH OF PANEL THICKNESS WHEN REAR MOUNTING 12 MAX. PANEL REAR FLANGE REF. A #4-40 NC-2A THD Material Cold rolled steel. Finish Cadmium plate, yellow chromate NOTE 1 A 6 inch/pound female and 4 inch/pound male maximum torque during assembly is recommended on steel screw lock assemblies. 2 A third flat washer is supplied for front panel mounting of tab shell connectors. NM - Non-Magnetic Finish and Material: Passivated Stainless Steel . Gold over copper per MIL-G-45204, Type II, Class 2 Brass #4-40 NC-2A THD. Order 2 per connector.

PDF Datasheet Preview

Accessories - Locking Hardware

Screw Locks

Insures positive mating. Used for vibration applications.

Front Panel Mount

D SUBMINIATURE CONNECTOR,

PIN OR SOCKET

MOUNTING PANEL

SCREW CLIP WITH THREAD

Rear Panel Mount

NUT WASHER LOCK WASHER HEX NUT

Female Srew Locks

Order 2 per connector.

Cadmium With Yellow Chromate

M24308 MIL-Spec.

D20418-2

M24308/26-1

D20418-50

D20418-39

M24308/26-2

D20418-74

NM For Use With Non-Magnetic/No-Dutgas Products

Brass

Stainless Steel

D20418-52

D20418-14

D20418-102

D20418-101

D20418 -77

Male Srew Locks
+_ +_
+_ +_
#4-40 NC-2B THD.

APPROX. REMOVE ONE WASHER FOR EACH OF PANEL THICKNESS WHEN REAR MOUNTING 12 MAX. PANEL

REAR FLANGE REF. A
#4-40 NC-2A THD

Material Cold rolled steel. Finish Cadmium plate, yellow chromate NOTE 1 A 6 inch/pound female and 4 inch/pound male maximum torque during assembly is recommended on steel screw lock
assemblies. 2 A third flat washer is supplied for front panel mounting of tab shell connectors.

NM - Non-Magnetic Finish and Material:

Passivated Stainless Steel . Gold over copper per MIL-G-45204, Type II, Class 2 Brass
#4-40 NC-2A THD.

Order 2 per connector.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived D20418-102 Datasheet file may be downloaded here without warranties.

Datasheet ID: D20418-102 639416