ICPL2601

ICPL2601 Datasheet

6N137 ICPL2601

Part	Datasheet
ICPL2601	ICPL2601 (pdf)

Related Parts	Information
ICPL2601SMT&R	ICPL2601SMT&R

PDF Datasheet Preview
6N137 ICPL2601 HIGH CMR, VERY HIGH SPEED OPTICALLY COUPLED ISOLATOR LOGIC GATE OUTPUT APPROVALS l UL recognised, File No. E91231 The 6N137 / ICPL2601 optocouplers consist of a GaAsP light emitting diode and a high gain integrated photo detector to provide 2500Volts RMS electrical isolation between input and output. An enable input allows the detector to be strobed. The output of the detector I.C. is an open collector Schottky clamped transistor. The ICPL2601 has an internal shield which provides a guaranteed common mode transient immunity specification of 1000V/µs minimum.This unique design provides maximum ac and dc circuit isolation while achieving TTL compatibility. The coupled parameters are guaranteed over the temperature range of 0°C to 70°C, such that a maximum input signal of 5mA will provide a minimum output sink current of 13mA equivalent to fan-out of eight gates l High speed - 10MBit/s l High Common Mode Transient Immunity 10kV/µs typical l Logic gate output l ICPL2601 has improved noise shield for superior common mode rejection l Options :- 10mm lead spread - add G after part no. Surface mount - add SM after part no. Tape&reel - add SMT&R after part no. l Line receiver, data transmission l Computer-peripheral interface l Data multiplexing l Pulse transformer replacement OPTION SM SURFACE MOUNT OPTION G Dimensions in mm 5 GND * ICPL2601 NOISE SHIELD 15° TRUTH TABLE

PDF Datasheet Preview

6N137 ICPL2601

HIGH CMR, VERY HIGH SPEED OPTICALLY COUPLED ISOLATOR

LOGIC GATE OUTPUT

APPROVALS l UL recognised, File No. E91231

The 6N137 / ICPL2601 optocouplers consist of
a GaAsP light emitting diode and a high gain
integrated photo detector to provide 2500Volts RMS
electrical isolation between input and output. An
enable input allows the detector to be strobed.

The output of the detector I.C. is an open
collector Schottky clamped transistor. The

ICPL2601 has an internal shield which provides
a guaranteed common mode transient immunity specification of 1000V/µs minimum.This unique
design provides maximum ac and dc circuit
isolation while achieving TTL compatibility. The
coupled parameters are guaranteed over the
temperature range of 0°C to 70°C, such that a
maximum input signal of 5mA will provide a
minimum output sink current of 13mA equivalent
to fan-out of eight gates
l High speed - 10MBit/s
l High Common Mode Transient

Immunity 10kV/µs typical
l Logic gate output
l ICPL2601 has improved noise shield
for superior common mode rejection
l Options :-
10mm lead spread - add G after part no.

Surface mount - add SM after part no.

Tape&reel - add SMT&R after part no.
l Line receiver, data transmission
l Computer-peripheral interface
l Data multiplexing
l Pulse transformer replacement

OPTION SM SURFACE MOUNT

OPTION G

Dimensions in mm
5 GND
* ICPL2601 NOISE SHIELD
15°

TRUTH TABLE

More datasheets: UC3843N | UC3843DX | UC3843D | UC3844DX | UC3842D | UC3844D | UC3842N | UC3844N | 6915-1002-030 | ICPL2601SMT&R

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ICPL2601 Datasheet file may be downloaded here without warranties.

Datasheet ID: ICPL2601 639269