X60008EIS8-50T1

X60008EIS8-50T1 Datasheet

X60008E-50

Part	Datasheet
X60008EIS8-50T1	X60008EIS8-50T1 (pdf)

Related Parts	Information
X60008EIS8-50	X60008EIS8-50

PDF Datasheet Preview
Data Sheet March 14, 2005 X60008E-50 FN8145.0 Precision 5.0V FGA Voltage Reference • Output Voltage 5.000V • Absolute Initial Accuracy = ±5mV • Ultra Low Power Supply Current 500nA • Low Temperature Coefficient = 20ppm/°C max • 10 mA Source & Sink Current Capability • 10 ppm/1000hrs Long Term Stability • Very Low Dropout Voltage 100 mV no load • Supply Voltage Range 5.1V to 9.0V • 5kV ESD Human Body Model • Standard Package SOIC-8 • Temp Range -40°C to +85°C The X60008-50 FGA voltage references are very high precision analog voltage references fabricated in Intersil’s proprietary Floating Gate Analog technology, which achieves superior levels of performance when compared to conventional band gap, buried zener, or XFET technologies. FGA voltage references feature very high initial accuracy, very low temperature coefficient, excellent long term stability, low noise and excellent line and load regulation, at the lowest power consumption currently available. These voltage references enable advanced applications for precision industrial & portable systems operating at significantly higher accuracy and lower power levels than can be achieved with conventional technologies. • High Resolution A/Ds & D/As • Digital Meters • Calibration Systems • V-F Converters • Precision Current Sources • Precision Regulators • Precision Oscillators • Battery Management Systems • Smart sensors • Strain Gage Bridges • Threshold Detectors • Servo Systems VIN = +6.5V VIN VOUT X60008-50 0.1µF Serial Bus 10µF 0.001µF * REF IN Enable SCK SDAT 16 to 24-bit A/D Converter * Also see Figure 3 in Applications Information CAUTION These devices are sensitive to electrostatic discharge follow proper IC Handling Procedures. 1-888-INTERSIL or 1-888-352-6832 \| Intersil and design is a registered trademark of Intersil Americas Inc. Copyright Intersil Americas Inc. All Rights Reserved All other trademarks mentioned are the property of their respective owners. PACKAGE DIAGRAM X60008E-50 GND VIN DNC GND X60008-XX SOIC DNC VOUT DNC PIN CONFIGURATIONS Pin Name GND VIN VOUT DNC Description Ground Connection Power Supply Input Connection Voltage Reference Output Connection Do Not Connect Internal Connection Must Be Left Floating ORDERING INFORMATION X 60008 E I S8 50 Logo Device Part Number 60008 = Standard Grade E = ±5.0mV, 20 ppm/°C Temperature Range I = -40°C to +85°C Package S8 = 8 lead SOIC VOUT Option 50 = 5.000V FN8145.0 March 14, 2005 X60008E-50 ABSOLUTE MAXIMUM RATINGS Storage Temperature Range............ -65°C to + 125°C Voltage on any Pin Referenced to Gnd.............................-0.5V to + 10V Voltage on “DNC” pins.........No connections permitted to these pins. Lead Temperature soldering, 10 secs .......... + 225°C RECOMMENDED OPERATING CONDITIONS Temperature Industrial Min. -40°C Max. +85°C COMMENT Absolute Maximum Ratings indicate limits beyond which permanent damage to the device and impaired reliability may occur. These are stress ratings provided for information only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification are not implied. For guaranteed specifications and test conditions, see Electrical Characteristics. The guaranteed specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test conditions. ELECTRICAL CHARACTERISTICS Operating Conditions VIN = 6.5V, IOUT = 0mA, COUT = 0.001µF, TA = -40 to +85°C unless otherwise specified. Parameter Conditions Min Typ Max Units VOUT VOA Output Voltage VOUT Accuracy X60008EIS8-50 TA = 25°C IIN VIN TC VOUT Supply Current Input Voltage Range Output Voltage Temperature Coefficient 1 X60008EIS8-50 ppm/°C

PDF Datasheet Preview

Data Sheet

March 14, 2005

X60008E-50

FN8145.0

Precision 5.0V FGA Voltage Reference
• Output Voltage 5.000V
• Absolute Initial Accuracy = ±5mV
• Ultra Low Power Supply Current 500nA
• Low Temperature Coefficient = 20ppm/°C max
• 10 mA Source & Sink Current Capability
• 10 ppm/1000hrs Long Term Stability
• Very Low Dropout Voltage 100 mV no load
• Supply Voltage Range 5.1V to 9.0V
• 5kV ESD Human Body Model
• Standard Package SOIC-8
• Temp Range -40°C to +85°C

The X60008-50 FGA voltage references are very high precision analog voltage references fabricated in Intersil’s proprietary Floating Gate Analog technology, which achieves superior levels of performance when compared to conventional band gap, buried zener, or XFET technologies.

FGA voltage references feature very high initial accuracy, very low temperature coefficient, excellent long term stability, low noise and excellent line and load regulation, at the lowest power consumption currently available. These voltage references enable advanced applications for precision industrial & portable systems operating at significantly higher accuracy and lower power levels than can be achieved with conventional technologies.
• High Resolution A/Ds & D/As
• Digital Meters
• Calibration Systems
• V-F Converters
• Precision Current Sources
• Precision Regulators
• Precision Oscillators
• Battery Management Systems
• Smart sensors
• Strain Gage Bridges
• Threshold Detectors
• Servo Systems

VIN = +6.5V

VIN VOUT X60008-50
0.1µF

Serial Bus
10µF
0.001µF *

REF IN

Enable SCK SDAT
16 to 24-bit A/D Converter
* Also see Figure 3 in Applications Information

CAUTION These devices are sensitive to electrostatic discharge follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-352-6832 | Intersil and design is a registered trademark of Intersil Americas Inc.

Copyright Intersil Americas Inc. All Rights Reserved

All other trademarks mentioned are the property of their respective owners.

PACKAGE DIAGRAM

X60008E-50

GND VIN

DNC GND

X60008-XX

SOIC

DNC VOUT DNC

PIN CONFIGURATIONS

Pin Name GND VIN VOUT DNC

Description Ground Connection Power Supply Input Connection Voltage Reference Output Connection Do Not Connect Internal Connection Must Be Left Floating
ORDERING INFORMATION

X 60008 E I S8 50

Logo

Device Part Number 60008 = Standard

Grade

E = ±5.0mV, 20 ppm/°C

Temperature Range I = -40°C to +85°C

Package

S8 = 8 lead SOIC

VOUT Option
50 = 5.000V

FN8145.0

March 14, 2005

X60008E-50

ABSOLUTE MAXIMUM RATINGS

Storage Temperature Range............ -65°C to + 125°C Voltage on any Pin

Referenced to Gnd.............................-0.5V to + 10V Voltage on “DNC” pins.........No connections permitted
to these pins. Lead Temperature soldering, 10 secs .......... + 225°C

RECOMMENDED OPERATING CONDITIONS

Temperature Industrial

Min. -40°C

Max. +85°C

COMMENT

Absolute Maximum Ratings indicate limits beyond which permanent damage to the device and impaired reliability may occur. These are stress ratings provided for information only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification are not implied.

For guaranteed specifications and test conditions, see Electrical Characteristics.

The guaranteed specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test conditions.

ELECTRICAL CHARACTERISTICS Operating Conditions VIN = 6.5V, IOUT = 0mA, COUT = 0.001µF, TA = -40 to +85°C unless otherwise specified.

Parameter

Conditions

Min Typ Max

Units

VOUT VOA

Output Voltage

VOUT Accuracy X60008EIS8-50

TA = 25°C

IIN VIN TC VOUT

Supply Current

Input Voltage Range

Output Voltage Temperature Coefficient 1

X60008EIS8-50
ppm/°C

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived X60008EIS8-50T1 Datasheet file may be downloaded here without warranties.

Datasheet ID: X60008EIS8-50T1 639242