EL1517AIYE-T13
EL1517AIYE-T13 Datasheet
EL1517A
| Part | Datasheet |
|---|---|
EL1517AIYE-T13 |
EL1517AIYE-T13 (pdf) |
| Related Parts | Information |
|---|---|
EL1517AIYE-T7 |
EL1517AIYE-T7 |
EL1517AIYE |
EL1517AIYE |
| PDF Datasheet Preview |
|---|
| Data Sheet August 8, 2006 EL1517A FN6139.2 xDSL Differential Line Driver The EL1517A is a dual operational amplifier designed for VDSL and ADSL line driving in DMT based solutions. This device features a high drive capability of 250mA while consuming only 7mA of supply current per amplifier and operating from a single 5V to 12V supply. This driver achieves a typical distortion of -80dBc, at 150kHz into a 25Ω load. The EL1517A is available in a 10 Ld HMSOP package and is specified for operation over the full -40°C to +85°C temperature range. The device has control pins C0 and C1 for controlling the bias and enable/disable of the outputs. These controls allow for lowering the power to fit the performance/power ratio for the application. The EL1517A is ideal for ADSL, SDSL, HDSL2 and VDSL line driving applications. The “A” suffix is used only for package leadframe distinction between EL1517. All performance graphs in this datasheet were generated for EL1517IS and EL1517IL. There is no significant electrical difference between EL1517AIYE and the performance curves for EL1517IL. The EL1517A can only be used for single supply operation. Use EL1517IL or EL1517IS for dual supply applications. Ordering Information TAPE PART MARKING REEL PACKAGE PKG. DWG. # EL1517AIYE BBJAA - 10 Ld HMSOP MDP0050 EL1517AIYE-T7 BBJAA 7” 10 Ld HMSOP MDP0050 EL1517AIYE-T13 BBJAA 13” 10 Ld HMSOP MDP0050 EL1517AIYEZ Note BBKAA - 10 Ld HMSOP MDP0050 Pb-Free EL1517AIYEZ-T7 BBKAA Note 7” 10 Ld HMSOP MDP0050 Pb-Free EL1517AIYEZ-T13 BBKAA Note 13” 10 Ld HMSOP MDP0050 Pb-Free NOTE Intersil Pb-free products employ special Pb-free material sets molding compounds/die attach materials and 100% matte tin plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020C. • Drives up to 250mA from a +12V supply • 18VP-P differential output drive into 50Ω • 20VP-P differential output drive into 100Ω • -80dBc typical driver output distortion at full output at 150kHz • -75dBc typical driver output distortion at 3.75MHz • -60dBc typical driver output distortion at 8MHz • -50dBc typical driver output distortion at 16MHz • Low quiescent current of 7mA per amplifier • 200MHz bandwidth • Use for single supply applications • Pb-free available RoHS compliant • VDSL line drivers • ADSL full rate CPE line driving • G.SHDSL, HDSL2 line drivers • HomePlug networking drivers Pinout EL1517A 10 LD HMSOP TOP VIEW VS+ 1 10 OUTB 9 INB- OUTA 3 GND* 8 INB+ INA- 4 INA+ 5 THERMAL PAD MUST BE CONNECTED TO GROUND. PAD IS CONNECTED INTERNALLY TO VS- AND THUS EL1517A CAN ONLY BE USED IN SINGLE SUPPLY APPLICATIONS. Get Full Datasheet CAUTION These devices are sensitive to electrostatic discharge follow proper IC Handling Procedures. 1-888-INTERSIL or 1-888-468-3774 | Intersil and design is a registered trademark of Intersil Americas Inc. Copyright Intersil Americas Inc. All Rights Reserved. All other trademarks mentioned are the property of their respective owners. |
| More datasheets: UX60-MB-5ST(60) | UX60-MB-5S8(01) | UX60-MB-5S8 | UX60A-MB-5ST | UX60-MB-5ST | VS20K123B320AA | DAMM-15P-Z | BTS141 | MDEV-915-250 | DAME-7W2P-K87 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived EL1517AIYE-T13 Datasheet file may be downloaded here without warranties.