IS71LD32160WP128-25BPLI

IS71LD32160WP128-25BPLI Datasheet

IS71/72LD32800WP064

Part	Datasheet
IS71LD32160WP128-25BPLI	IS71LD32160WP128-25BPLI (pdf)

PDF Datasheet Preview
LPDDR2 DRAM + Serial NOR Flash LPDDR2 DRAM FEATURES: • Densities 256Mb, 512Mb, 1Gb SERIAL FLASH FEATURES: • 64Mb, 128Mb • Low-voltage Core and I/O Power Supplies • VDD2 = 1.2V, VDDCA/VDDQ = 1.2V, VDD1 = 1.8V • Options x16, x32 • Industry Standard Serial Interface • VDD = 1.8V • 256 bytes per Programmable Page • High Speed Un-terminated Logic HSUL_12 I/O Interface • Clock Frequency Range 10MHz to 533MHz Data rate range 20Mbps to 1066Mbps per I/O • Four-bit Pre-fetch DDR Architecture • Multiplexed, double data rate, command/address inputs • 4 or 8 internal banks for concurrent operation • Bidirectional/differential data strobe per byte of data DQS/DQS# • Programmable Read/Write latencies RL/WL and burst lengths 4, 8 or 16 • ZQ Calibration • On-chip temperature sensor to control self refresh rate • Partial self refresh PASR • Deep power-down mode DPD Package: • 168-ball PoP BGA • Consistent footprint with density migration • Supports standard SPI, Fast, Dual, Dual I/O, Quad, Quad I/O, SPI DTR, Dual I/O DTR, Quad I/O DTR, and QPI • Supports Serial Flash Discoverable Parameters SFDP • 50MHz Normal and 133Mhz Fast Read • 532 MHz equivalent QPI • DTR Dual Transfer Rate up to 66MHz • Selectable dummy cycles • Configurable drive strength • More than 100,000 erase/program cycles • More than 20-year data retention • Chip Erase with Uniform Sector/Block Erase 4/32/64 Kbyte • Program 1 to 256 bytes per page • Program/Erase Suspend & Resume • Low Instruction Overhead Operations • Continuous Read 8/16/32/64-Byte burst • Selectable burst length • QPI for reduced instruction overhead • AutoBoot operation Temperature Grades: • Commercial 0°C to 70°C • Industrial -40°C to 85°C • Automotive, A1 -40°C to 85°C MCP Multi-Chip Package Part Numbers: • Automotive, A2 -40°C to 105°C • Automotive, A25 -40°C to 115°C Density DRAM Vcc 256Mb DRAM + 64Mb Flash IS71/72LD32800WP064 1.2/1.8V 512Mb DRAM + 128Mb Flash IS71/72LD32160WP128 1.2/1.8V Contact us at for additional options. DRAM Speed Mhz 533,400,333 533,400,333 Flash Vcc 1.8V 1.8V Flash Speed Mhz Pkg Pins

PDF Datasheet Preview

LPDDR2 DRAM + Serial NOR Flash

LPDDR2 DRAM FEATURES:
• Densities 256Mb, 512Mb, 1Gb

SERIAL FLASH FEATURES:
• 64Mb, 128Mb
• Low-voltage Core and I/O Power Supplies
• VDD2 = 1.2V, VDDCA/VDDQ = 1.2V, VDD1 = 1.8V
• Options x16, x32
• Industry Standard Serial Interface
• VDD = 1.8V
• 256 bytes per Programmable Page
• High Speed Un-terminated Logic HSUL_12 I/O Interface
• Clock Frequency Range 10MHz to 533MHz Data rate range 20Mbps to 1066Mbps per I/O
• Four-bit Pre-fetch DDR Architecture
• Multiplexed, double data rate, command/address
inputs
• 4 or 8 internal banks for concurrent operation
• Bidirectional/differential data strobe per byte of
data DQS/DQS#
• Programmable Read/Write latencies RL/WL and
burst lengths 4, 8 or 16
• ZQ Calibration
• On-chip temperature sensor to control self refresh
rate
• Partial self refresh PASR
• Deep power-down mode DPD

Package:
• 168-ball PoP BGA
• Consistent footprint with density migration
• Supports standard SPI, Fast, Dual, Dual I/O, Quad, Quad I/O, SPI DTR, Dual I/O DTR, Quad I/O DTR, and QPI
• Supports Serial Flash Discoverable Parameters SFDP
• 50MHz Normal and 133Mhz Fast Read
• 532 MHz equivalent QPI
• DTR Dual Transfer Rate up to 66MHz
• Selectable dummy cycles
• Configurable drive strength
• More than 100,000 erase/program cycles
• More than 20-year data retention
• Chip Erase with Uniform Sector/Block Erase 4/32/64

Kbyte
• Program 1 to 256 bytes per page
• Program/Erase Suspend & Resume
• Low Instruction Overhead Operations
• Continuous Read 8/16/32/64-Byte burst
• Selectable burst length
• QPI for reduced instruction overhead
• AutoBoot operation

Temperature Grades:
• Commercial 0°C to 70°C
• Industrial -40°C to 85°C
• Automotive, A1 -40°C to 85°C

MCP Multi-Chip Package Part Numbers:
• Automotive, A2 -40°C to 105°C
• Automotive, A25 -40°C to 115°C

Density

DRAM Vcc
256Mb DRAM + 64Mb Flash

IS71/72LD32800WP064
1.2/1.8V
512Mb DRAM + 128Mb Flash

IS71/72LD32160WP128
1.2/1.8V

Contact us at for additional options.

DRAM Speed Mhz
533,400,333
533,400,333

Flash Vcc 1.8V
1.8V

Flash Speed Mhz

Pkg Pins

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived IS71LD32160WP128-25BPLI Datasheet file may be downloaded here without warranties.

Datasheet ID: IS71LD32160WP128-25BPLI 639329