IDTVPP1101PNG

IDTVPP1101PNG Datasheet

Part	Datasheet
IDTVPP1101PNG	IDTVPP1101PNG (pdf)

PDF Datasheet Preview
VPP1101PNG VPP1101PNG is a highly integrated DisplayPort receiver, capable to support 1/2/4 lanes of DisplayPort input at Reduced or High Bit Rate, and compliant to DisplayPort V1.1a Standard. VPP1101PNG outputs, in LVTTL, can be configured either in single or dual bus mode to support display format up-to WQXGA 2560x1600-60RB at 6/8/10-bit color depth. VPP1101 also supports the second stream for audio path at upto 192KHz sample rate of 30-bit per data in S/PDIF or I2S format. Standards compliance DisplayPort 1.1a, HDCP v1.3, and EDID v1.4 Supports 1/2/4 main link lanes from the source for data rates of 1.62Gbps RBR and 2.7Gbps HBR Adaptive receiver equalization to compensate for PCB, cable, or connector signal loss up to 15db Built-in PRBS7 test pattern generation AC coupled for low voltage chipset operation Supports integration into LCD panels for direct drive displays High speed bi-directional auxiliary channel AUX CH capable of I2C mapping over AUX CH between the source and the VPP1101PNG Dual I2Cs or I2C+SPI Supported output resolution • Monitor panel Up to 2560x1600 reduced-blanking mode • TV panel Up to FullHD 1920x1080p Supports up to 24 bits per pixel at 1080p Faithfully recover the data stream based on Attribute Packet Capable to support DisplayPort compliant cable up-to 30-meter Supports a minimum of 1080p at 24bpp 50/60Hz over 4 lane at 30- meter cable Video input options • Input pixel data depth 6/8/10/12 bits • Input pixel format supports RGB444 Video output options • Single or dual-port LVTTL data output • Compatible with VESA panel interface standards • Selectable rising/falling edge data sample • Support 6/8/10-bit color depth output • Supports output pixel formats RGB444 18/24/30 bits, YCbCr444 18/24/30 bits, YCbCr422 12/16/20 bits, and YCbCr422 ITU-R BT.656 6/8/10 bits VPP1101PNG Product Brief Digital audio interface supports high-end and low-end audio system • S/PDIF output supports PCM, Dolby Digital, DTS digital audio transmission up to 192 kHz Fs compliant to IEC 60958 and IEC 61937 • One I2S output for connection to external low-cost audio DAC up to 192kHz • Error correction • Audio mute Built-in OTP, or external EEPROM, or SPI ROM Provides exceptional Secured Content Protection with HDCP for digital content for video and audio streams. Advanced design for test DFT for added reliability • High-speed loop-back testing • At speed production testing 128L LQFP or 132L QFN 10x10x0.85mm package RoHS compliant green package DTV with DisplayPort input Projector with DisplayPort input Direct Drive PC Monitor or TV Monitor with DisplayPort input Block Diagram 2008 Integrated Device technology, Inc. 1 of 1 *Notice The information in this document is subject to change without notice April 22, 2008

PDF Datasheet Preview

VPP1101PNG

VPP1101PNG is a highly integrated DisplayPort receiver, capable to support 1/2/4 lanes of DisplayPort input at Reduced or High Bit Rate, and compliant to DisplayPort V1.1a Standard. VPP1101PNG outputs, in LVTTL, can be configured either in single or dual bus mode to support display format up-to WQXGA 2560x1600-60RB at 6/8/10-bit color depth. VPP1101 also supports the second stream for audio path at upto 192KHz sample rate of 30-bit per data in S/PDIF or I2S format.

Standards compliance DisplayPort 1.1a, HDCP v1.3, and EDID v1.4 Supports 1/2/4 main link lanes from the source for data rates of
1.62Gbps RBR and 2.7Gbps HBR

Adaptive receiver equalization to compensate for PCB, cable, or
connector signal loss up to 15db

Built-in PRBS7 test pattern generation AC coupled for low voltage chipset operation Supports integration into LCD panels for direct drive displays High speed bi-directional auxiliary channel AUX CH capable of I2C
mapping over AUX CH between the source and the VPP1101PNG

Dual I2Cs or I2C+SPI Supported output resolution
• Monitor panel Up to 2560x1600 reduced-blanking mode
• TV panel Up to FullHD 1920x1080p

Supports up to 24 bits per pixel at 1080p Faithfully recover the data stream based on Attribute Packet Capable to support DisplayPort compliant cable up-to 30-meter Supports a minimum of 1080p at 24bpp 50/60Hz over 4 lane at 30-
meter cable

Video input options
• Input pixel data depth 6/8/10/12 bits
• Input pixel format supports RGB444

Video output options
• Single or dual-port LVTTL data output
• Compatible with VESA panel interface standards
• Selectable rising/falling edge data sample
• Support 6/8/10-bit color depth output
• Supports output pixel formats RGB444 18/24/30 bits, YCbCr444
18/24/30 bits, YCbCr422 12/16/20 bits, and YCbCr422 ITU-R BT.656 6/8/10 bits

VPP1101PNG Product Brief Digital audio interface supports high-end and low-end audio system
• S/PDIF output supports PCM, Dolby Digital, DTS digital audio transmission up to 192 kHz Fs compliant to IEC 60958 and IEC 61937
• One I2S output for connection to external low-cost audio DAC up to 192kHz
• Error correction
• Audio mute

Built-in OTP, or external EEPROM, or SPI ROM Provides exceptional Secured Content Protection with HDCP for
digital content for video and audio streams.

Advanced design for test DFT for added reliability
• High-speed loop-back testing
• At speed production testing
128L LQFP or 132L QFN 10x10x0.85mm package RoHS compliant green package

DTV with DisplayPort input Projector with DisplayPort input Direct Drive PC Monitor or TV Monitor with DisplayPort input

Block Diagram
2008 Integrated Device technology, Inc.
1 of 1
*Notice The information in this document is subject to change without notice

April 22, 2008

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived IDTVPP1101PNG Datasheet file may be downloaded here without warranties.

Datasheet ID: IDTVPP1101PNG 637544