Tsi108 Host Bridge for Product Brief
Part | Datasheet |
---|---|
![]() |
TSI108-200CLY (pdf) |
Related Parts | Information |
---|---|
![]() |
TSI108-200CL |
PDF Datasheet Preview |
---|
Tsi108 Host Bridge for Product Brief Device Overview The Tundra Tsi108 is an advanced host bridge for PowerPC processors that supports PCI-X, DDR2-400 SDRAM, Gigabit Ethernet, and Flash. The device contains numerous integrated features that enable customers to reduce system design complexity and system costs. As a result, the Tsi108 has the best price/benefits ratio on the market. The Tsi108 builds on a decade of Tundra design experience in PowerPC host bridging. It delivers industry-leading performance for customers in the wireless infrastructure, storage networking, network access, printer, military, and industrial automation markets. Enhancing System Performance The advanced Switch Fabric architecture of the Tsi108 allows designers to significantly enhance system performance. The Ethernet Controller and PCI-X Interface offer superior data transfer rates. In addition, CPU to memory performance is exceptional due to features like configurable port arbitration priority and queuing reads ahead of writes. Minimizing System Cost The Tsi108 feature set provides system designers with an array of integrated functionality to assist in lowering overall system cost, such as an integrated Clock Generator with spread-spectrum capabilities, a DDR2400 Memory Controller, and internal processor and PCI/X bus arbiters. Simplifying Design Tsi108’s flexible configuration options empower designers to develop their systems quickly and efficiently. Selection of PCI/PCI-X modes, an integrated Clock Generator, DDR2 support, and the ability to configure it as a PCI Host/Agent, all enable the Tsi108 to be used in a range of applications. The JTAG Interface also simplifies the debug process by allowing access to Tsi108’s registers without impacting active transactions. Effective Power Management The Tsi108 is the lowest power consuming host bridge on the market. It minimizes active power by disabling unused ports and clocks, while its integrated Clock Generator saves power over discrete devices. Its support for DDR2 provides memory power savings of up to 50 percent when compared with DDR. The Tsi108 also conforms to the PCI Bus Power Management Interface Specification. Block Diagram 60x/MPX 200-MHz Bus, 64-bit Data, 32/36-bit Address Spread-spectrum Clock Generator Four External Interrupts Four DMA Channels Clock Generator Interrupt Controller Two UARTs UART Processor Interface Arbiter Register Bus Switch Fabric Ethernet Controller Memory Controller DDR2-400, 8-bit ECC Two 10/100/1G Ports Connects to Serial PROMs Host Local Port 32-bit Flash & I/O Access IEEE1149.1 Boundry Scan JTAG 80B5000_BK001_06 GPIO PCI-X Interface Arbiter 16-bit I/O Port 133-MHz PCI-X Bus 66-MHz/64-bit PCI Bus, 64-bit Data Seven Bus Masters Processor Interface • Supports PowerPC processors Freescale MPC74xx IBM PPC 750xx • Operates up to 200 MHz PCI/X Interface • Supports PCI and PCI-X modes • Operates up to 133 MHz • Supports PCI/X Host or Agent operation • Supports CompactPCI Hot Swap Memory Controller • Supports DDR2-400 devices |
More datasheets: DRT-DTH-Q1416 | DRT-DTH-Q1833 | DRT-DTH-Q2431 | DRT-DTH-Q2524 | DRT-DTH-Q410-6 | DRT-DTH-Q525-4 | DRT-DTH-Q746-2 | DRT-DTH-Q2002-8 | DRT-DTH-Q1173-3 | LTL251 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived TSI108-200CLY Datasheet file may be downloaded here without warranties.